Table of Contents


UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
 
FORM 10-K
(Mark One)
x
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
 
For the Fiscal Year Ended June 30, 2016
OR
o
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
 
For the Transition Period from                      to                     
Commission File Number 000-09992
KLA-TENCOR CORPORATION
(Exact name of registrant as specified in its charter)
Delaware
 
04-2564110
(State or other jurisdiction of
incorporation or organization)
 
(I.R.S. Employer
Identification Number)
 
 
 
One Technology Drive, Milpitas, California
 
95035
(Address of Principal Executive Offices)
 
(Zip Code)
Registrant’s Telephone Number, Including Area Code: (408) 875-3000
Securities Registered Pursuant to Section 12(b) of the Act:
Title of Each Class
 
Name of Each Exchange on Which Registered
Common Stock, $0.001 par value per share
 
The Nasdaq Stock Market, LLC
 
 
The NASDAQ Global Select Market
 
Securities Registered Pursuant to Section 12(g) of the Act:
 
 
None
 
 
(Title of Class)
 
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  x    No  o
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes  o    No  x
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  o
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  x    No  o
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  x
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.
Large accelerated filer  x
  
Accelerated filer  o
Non-accelerated filer  o (Do not check if a smaller reporting  company)
  
Smaller reporting company  o
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  o    No  x
The aggregate market value of the voting and non-voting common stock held by non-affiliates of the registrant based upon the closing price of the registrant’s stock, as of December 31, 2015, was approximately $10.78 billion.
The registrant had 155,995,003 shares of common stock outstanding as of July 15, 2016.
DOCUMENTS INCORPORATED BY REFERENCE
Portions of the Proxy Statement for the 2016 Annual Meeting of Stockholders (“Proxy Statement”), and to be filed pursuant to Regulation 14A within 120 days after the registrant’s fiscal year ended June 30, 2016, are incorporated by reference into Part III of this report.


Table of Contents

INDEX 
 
  
 
 
 
 
PART I
 
 
 
 
Item 1.
  
Item 1A.
  
Item 1B.
  
Item 2.
  
Item 3.
  
Item 4.
  
 
 
 
 
PART II
 
 
 
 
Item 5.
  
Item 6.
  
Item 7.
  
Item 7A.
  
Item 8.
  
 
  
 
  
 
 
 
  
 
  
 
  
 
  
Item 9.
  
Item 9A.
  
Item 9B.
  
 
 
 
 
PART III
 
 
 
 
Item 10.
  
Item 11.
  
Item 12.
  
Item 13.
  
Item 14.
  
 
 
 
 
PART IV
 
 
 
 
Item 15.
  
 
  
 
  
 
  

i

Table of Contents

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS
This report contains certain forward-looking statements within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934. All statements other than statements of historical fact may be forward-looking statements. You can identify these and other forward-looking statements by the use of words such as “may,” “will,” “could,” “would,” “should,” “expects,” “plans,” “anticipates,” “relies,” “believes,” “estimates,” “predicts,” “intends,” “potential,” “continue,” “thinks,” “seeks,” or the negative of such terms, or other comparable terminology. Forward-looking statements also include the assumptions underlying or relating to any of the foregoing statements. Such forward-looking statements include, among others, our Merger with Lam Research; forecasts of the future results of our operations, including profitability; orders for our products and capital equipment generally; sales of semiconductors; the investments by our customers in advanced technologies and new materials; the allocation of capital spending by our customers (and, in particular, the percentage of spending that our customers allocate to process control); growth of revenue in the semiconductor industry, the semiconductor capital equipment industry and our business; technological trends in the semiconductor industry; future developments or trends in the global capital and financial markets; our future product offerings and product features; the success and market acceptance of new products; timing of shipment of backlog; our future product shipments and product and service revenues; our future gross margins; our future research and development expenses and selling, general and administrative expenses; our ability to successfully maintain cost discipline; international sales and operations; our ability to maintain or improve our existing competitive position; success of our product offerings; creation and funding of programs for research and development; attraction and retention of employees; results of our investment in leading edge technologies; the effects of hedging transactions; the effect of the sale of trade receivables and promissory notes from customers; our future effective income tax rate; our recognition of tax benefits; future payments of dividends to our stockholders; the completion of any acquisitions of third parties, or the technology or assets thereof; benefits received from any acquisitions and development of acquired technologies; sufficiency of our existing cash balance, investments, cash generated from operations and unfunded revolving line of credit under a Credit Agreement (the “Credit Agreement”) to meet our operating and working capital requirements, including debt service and payment thereof; future dividends, and stock repurchases; our compliance with the financial covenants under the Credit Agreement; the expected timing of the completion of our global employee workforce reduction; the additional charges that we may incur in connection with our global employee workforce reduction; the expected cost savings that we expect to recognize as a result of such workforce reduction; the adoption of new accounting pronouncements; the timing for the consummation of the Merger; and our repayment of our outstanding indebtedness.
Our actual results may differ significantly from those projected in the forward-looking statements in this report. Factors that might cause or contribute to such differences include, but are not limited to, those discussed in Item 1A, “Risk Factors” in this Annual Report on Form 10-K, as well as in Item 1, “Business” and Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in this report. You should carefully review these risks and also review the risks described in other documents we file from time to time with the Securities and Exchange Commission, including the Quarterly Reports on Form 10-Q that we will file in the fiscal year ending June 30, 2017. You are cautioned not to place undue reliance on these forward-looking statements, and we expressly assume no obligation and do not intend to update the forward-looking statements in this report after the date hereof.
 
 

ii

Table of Contents

PART I

ITEM 1.
BUSINESS
The Company
KLA-Tencor Corporation (“KLA-Tencor” or the “Company” and also referred to as “we” or “our”) is a leading supplier of process control and yield management solutions for the semiconductor and related nanoelectronics industries. Our products are also used in a number of other high technology industries, including the light emitting diode (“LED”) and data storage industries, as well as general materials research.
Within our primary area of focus, our comprehensive portfolio of inspection and metrology products, and related service, software and other offerings, helps integrated circuit (“IC” or “chip”) manufacturers manage yield throughout the entire semiconductor fabrication process—from research and development (“R&D”) to final volume production. These products and offerings are designed to provide comprehensive solutions to help our customers to accelerate their development and production ramp cycles, to achieve higher and more stable semiconductor die yields, and to improve their overall profitability.
KLA-Tencor’s products and services are used by the vast majority of bare wafer, IC, lithography reticle (“reticle” or “mask”) and disk manufacturers around the world. These customers turn to us for inline wafer and IC defect monitoring, review and classification; reticle defect inspection and metrology; packaging and interconnect inspection; critical dimension (“CD”) metrology; pattern overlay metrology; film thickness, surface topography and composition measurements; measurement of in-chamber process conditions, wafer shape and stress metrology; computational lithography tools; and overall yield and fab-wide data management and analysis systems. Our advanced products, coupled with our unique yield management services, allow us to deliver the solutions our customers need to accelerate their yield learning rates and significantly reduce their risks and costs.
Certain industry and technical terms used in this section are defined in the subsection entitled “Glossary” found at the end of this Item 1.
KLA-Tencor was formed in April 1997 through the merger of KLA Instruments Corporation and Tencor Instruments, two long-time leaders in the semiconductor equipment industry that originally began operations in 1975 and 1976, respectively.
Additional information about KLA-Tencor is available on our website at www.kla-tencor.com. Our Annual Report on Form 10-K, our Quarterly Reports on Form 10-Q, Current Reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended, are available free of charge on our website as soon as reasonably practicable after we electronically file them with or furnish them to the Securities and Exchange Commission (“SEC”). Information contained on our website is not part of this Annual Report on Form 10-K or our other filings with the SEC. Additionally, these filings may be obtained through the SEC’s website (www.sec.gov), which contains reports, proxy and information statements, and other information regarding issuers that file electronically. Documents that are not available through the SEC’s website may also be obtained by mailing a request to the U.S. Securities and Exchange Commission, Office of FOIA/PA Operations, 100 F Street, NE, Washington, DC 20549-2736, by submitting an online request to the SEC at www.sec.gov or by calling the SEC at 1-800-732-0330.
Investors and others should note that we announce material financial information to our investors using our investor relations web site (www.ir.kla-tencor.com), SEC filings, press releases, public conference calls and webcasts. We use these channels as well as social media to communicate with the public about our company, our products and services and other matters. It is possible that the information we post on social media could be deemed to be material information. Therefore, we encourage investors, the media, and others interested in our company to review the information we post on the social media channels listed on our investor relations web site.

1

Table of Contents

Proposed Merger with Lam Research
On October 20, 2015, the Company entered into an Agreement and Plan of Merger and Reorganization (the “Merger Agreement”) with Lam Research Corporation (“Lam Research”), under which KLA-Tencor will ultimately become a direct or indirect wholly-owned subsidiary of Lam Research through a merger with a subsidiary of Lam Research (the “Merger”). The Merger has been unanimously approved by the boards of directors of both companies. The consummation of the Merger is conditioned on the satisfaction of customary closing conditions, including domestic and foreign regulatory approvals and performance in all material respects by each party of its obligations under the Merger Agreement. On February 19, 2016, the Merger Agreement was approved by KLA-Tencor’s stockholders and Lam Research’s stockholders approved the issuance of Lam Research’s common stock in the Merger. Refer also to Note 1 “Description of Business and Summary of Significant Accounting Policies” and Item 1A, “Risk Factors.” For additional details on the transaction, refer to the copy of the Merger Agreement attached as an Exhibit to the Form 8-K filed with the U.S. Securities and Exchange Commission (“SEC”) on October 21, 2015.
Industry
General Background
KLA-Tencor’s core focus is the semiconductor industry. The semiconductor fabrication process begins with a bare silicon wafer—a round disk that is typically 150 millimeters, 200 millimeters or 300 millimeters in diameter, about as thick as a credit card and gray in color. The process of manufacturing wafers is in itself highly sophisticated, involving the creation of large ingots of silicon by pulling them out of a vat of molten silicon. The ingots are then sliced into wafers. Prime silicon wafers are then polished to a mirror finish. Other, more specialized wafers, such as epitaxial silicon (“epi”), silicon-on-insulator (“SOI”), gallium nitride (“GaN”) and silicon carbide (“SiC”), are also common in the semiconductor industry.
The manufacturing cycle of an IC is grouped into three phases: design, fabrication and testing. IC design involves the architectural layout of the circuit, as well as design verification and reticle generation. The fabrication of a chip is accomplished by depositing a series of film layers that act as conductors, semiconductors or insulators on bare wafers. The deposition of these film layers is interspersed with numerous other process steps that create circuit patterns, remove portions of the film layers, and perform other functions such as heat treatment, measurement and inspection. Most advanced chip designs require hundreds of individual steps, many of which are performed multiple times. Most chips consist of two main structures: the lower structure, typically consisting of transistors or capacitors which perform the “smart” functions of the chip; and the upper “interconnect” structure, typically consisting of circuitry which connects the components in the lower structure. When all of the layers on the wafer have been fabricated, each chip on the wafer is tested for functionality. The wafer is then cut into individual chips, and those chips that passed functional testing are packaged. Final testing is performed on all packaged chips.
Current Trends
The growth of consumer demand for mobile devices, including smartphones, tablets and wearable devices, is currently driving growth in the electronics industry and, as a result, growth in the semiconductor industry as well. Contained within each of these latest consumer devices are advanced semiconductors that are helping to enable the features consumers want in device performance, such as smaller product form factors, lower power requirements, bigger and brighter screens and speed, at a lower cost. Alongside this market growth, the industry continues to experience a high rate of change in technology, with the emergence of new techniques and architectures in production today, such as three-dimensional (3D) transistors, advanced patterning lithography and advanced wafer-level packaging. KLA-Tencor’s inspection and measurement technologies play a key role in enabling our customers’ advanced semiconductor manufacturing processes to support these trends.

2

Table of Contents

Companies that anticipate future market demands by developing and refining new technologies and manufacturing processes are better positioned to lead in the semiconductor market. Accelerating the yield ramp and maximizing production yields of high-performance devices are key goals of modern semiconductor manufacturing. Ramping to high-volume production ahead of competitors can dramatically increase the revenue an IC manufacturer realizes for a given product. During past industry cycles, semiconductor manufacturers generally contended with a few key new technologies or market trends, such as a specific design rule shrink. In today’s market, driven by consumer demand for low-cost electronic goods, the leading semiconductor manufacturers are investing in simultaneous production integration of multiple new process technologies, some requiring new substrate and film materials, new geometries, advanced lithography and advanced packaging techniques. While many of these technologies have been adopted at the development and pilot production stages of chip manufacturing, significant challenges and risks associated with each technology have affected the adoption of these technologies into full-volume production. For example, as design rules decrease, yields become more sensitive to the size and density of defects and device performance characteristics (namely speed, capacity or power management) become more sensitive to parameters, such as line width and film thickness variation. New process materials, such as high-k dielectrics, SOI wafers and immersion lithography-capable photoresists, require extensive characterization before they can be used in the manufacturing process. Moving several of these advanced technologies into production at once only adds to the risks that chipmakers face.
The continuing evolution of semiconductor devices to smaller geometries and more complex multi-level circuitry has significantly increased the performance and cost requirements of the capital equipment used to manufacture these devices. Construction of an advanced wafer fabrication facility today can cost over $5 billion, substantially more than previous-generation facilities. In addition, chipmakers are demanding increased productivity and higher returns from their manufacturing equipment and are also seeking ways to extend the performance of their existing equipment.
By developing new process control and yield management tools that help chipmakers accelerate the adoption of these new technologies into volume production, we enable our customers to better leverage these increasingly expensive facilities and improve their return on investment (“ROI”). Once customers’ production lines are operating at high volume, our tools help ensure that yields are stable and process excursions are identified for quick resolution. In addition, the move to each new generation’s smaller design rules, coupled with new materials and device innovation, has increased in-process variability, which requires an increase in inspection and metrology sampling.
KLA-Tencor systems not only analyze defectivity and metrology issues at critical points in the wafer, reticle and IC manufacturing processes, but also provide information to our customers so that they can identify and address the underlying process problems. The ability to locate the source of defects and resolve the underlying process issues enables our customers to improve control over their manufacturing processes. This helps them increase their yield of high-performance parts and deliver their products to market faster—thus maximizing their profits. With our broad portfolio of application-focused technologies and our dedicated yield technology expertise, we are in position to be a key supplier of comprehensive yield management solutions for customers’ next-generation products, helping our customers respond to the challenges posed by shrinking device sizes, the transition to new production materials, new device and circuit architecture, more demanding lithography processes, and new back-end packaging techniques.
Products
KLA-Tencor is engaged primarily in the design, manufacture and marketing of process control and yield management solutions for the semiconductor and related nanoelectronics industries and provides a comprehensive portfolio of inspection and metrology products, and related service, software and other offerings.
KLA-Tencor’s inspection and metrology products and related offerings can be broadly categorized as supporting customers in the following groups: Chip Manufacturing, Wafer Manufacturing, Reticle Manufacturing, LED, Power Device and Compound Semiconductor Manufacturing, Data Storage Media/Head Manufacturing, Microelectromechanical Systems (“MEMS”) Manufacturing, and General Purpose/Lab Applications. The more significant of these products are included in the product table at the end of this “Products” section. We also provide refurbished KLA-Tencor tools as part of our K-T CertifiedTM program for customers manufacturing larger design-rule devices, as well as comprehensive service and support for our products.
Chip Manufacturing
KLA-Tencor’s comprehensive portfolio of inspection and metrology products, and related service, software and other offerings, helps chip manufacturers manage yield throughout the entire semiconductor fabrication process—from research and development to final volume production. These products and offerings are designed to provide comprehensive solutions to help our customers to accelerate their development and production ramp cycles, to achieve higher and more stable semiconductor die yields, and to improve their overall profitability.

3

Table of Contents

Front-End Defect Inspection
KLA-Tencor’s front-end defect inspection tools cover a broad range of yield applications within the IC manufacturing environment, including: research and development; incoming wafer qualification; reticle qualification; and tool, process and line monitoring. Patterned and unpatterned wafer inspectors find particles, pattern defects and electrical issues on the front surface, back surface and edge of the wafer, allowing engineers to detect and monitor critical yield excursions. Fabs rely on our high sensitivity reticle inspection systems to identify defects in reticles at an early stage and to prevent reticle defects from printing on production wafers. The defect data generated by our inspectors is compiled and reduced to relevant root-cause and yield-analysis information with our suite of data management tools. By implementing our front-end defect inspection and analysis systems, chipmakers are able to take quick corrective action, resulting in faster yield improvement and better time to market.
During the fiscal year ended June 30, 2016, we launched several front-end defect inspection products that help accelerate yield for next-generation design node devices: 3900 Series, 2930 Series, PumaTM 9980 Series and Surfscan® SP5XP. The 3900 Series broadband plasma patterned wafer inspection systems incorporate a new high resolution deep ultra-violet (“DUV”) wavelength range and optical inspection speed, supporting defect discovery and debug of advanced IC processes. The 2930 Series broadband plasma patterned wafer inspection systems are used to discover and monitor defects related to design or process issues, supporting advanced IC development and ramp. The PumaTM 9980 laser scanning patterned wafer inspector provides enhanced defect type capture for high throughput production ramp monitoring across a wide range of IC applications. The Surfscan® SP5XP unpatterned wafer inspection system utilizes extended deep ultra-violet optical technologies for cost-effective, early detection of process and tool excursions.
The products that we launched during the fiscal year ended June 30, 2016 further strengthened our broad range of offerings that support the front-end defect inspection market. In the field of patterned wafer inspection, we offer our 3900 Series (for high resolution broadband plasma defect inspection); our 2930 Series and 2920 Series (for broadband plasma defect inspection); our PumaTM 9980 Series, PumaTM 9850 Series and PumaTM 9650 Series (for laser scanning defect inspection); our 8 Series systems (for high productivity defect inspection); and our CIRCLTM cluster tool (for defect inspection, review and metrology of all wafer surfaces - front side, edge and back side). In the field of unpatterned wafer and surface inspection, we offer the Surfscan® SP5 Series and Surfscan® SP3 Series (wafer defect inspection systems for process tool qualification and monitoring using blanket films and bare wafers); and the SURFmonitorTM (integrated on the Surfscan® SP5 and Surfscan® SP3 Series), which enables surface quality measurements and capture of low-contrast defects. For reticle inspection, we offer our X5.2TM, X5.3TM and TeronTM SL650 Series products, which are photomask inspection systems that allow IC fabs to qualify incoming reticles and inspect production reticles for contaminants and other process-related changes. In addition, we offer a number of other products for the front-end defect inspection market, as reflected in the product table at the conclusion of this “Products” section.
Defect Review
KLA-Tencor’s defect review systems capture high resolution images of the defects detected by inspection tools. These images enable defect classification, helping chipmakers identify and resolve yield issues. KLA-Tencor’s suite of defect inspectors, defect review and classification tools and data management systems form a broad solution for finding, identifying and tracking yield-critical defects and process issues. During the fiscal year ended June 30, 2016, we introduced the eDR7280TM, an electron-beam wafer defect review and classification system that utilizes improved imaging and automatic defect classification capability to identify detected defects and produce an accurate representation of the detected defect population.
Advanced Packaging Process Control
KLA-Tencor offers standalone and cluster inspection and metrology systems for various applications in the field of advanced semiconductor packaging (i.e., at the middle and back-end of the semiconductor manufacturing process). Our CIRCL-AP™ all-surface inspection, metrology and review system supports advanced wafer-level packaging processes, such as 2.5D/3D IC integration using through silicon vias (“TSVs”), wafer-level chip scale packaging (“WLCSP”) and fan-out wafer-level packaging (“FOWLP”). Used for packaging applications associated with LEDs, MEMS, image sensors and flip-chip packaging, our WI-22x0 Series products focus on front side wafer inspection and provide feedback on wafer surface quality, quality of the wafer dicing, or quality of wafer bumps, pads and pillars. Our component inspector products, the ICOS® T830 and ICOS® T640, inspect various semiconductor components that are handled in a tray, such as microprocessors or memory chips. Component inspection capability includes 3D coplanarity inspection, measurement of the evenness of the contacts, component height and two-dimensional (“2D”) surface inspection.

4

Table of Contents

Metrology
KLA-Tencor’s array of metrology solutions addresses IC and substrate manufacturing, as well as scientific research and other applications. Precise metrology and control of pattern dimensions, film thicknesses, layer-to-layer alignment, pattern placement, surface topography and electro-optical properties are important in many industries as critical dimensions narrow, film thicknesses shrink to countable numbers of atomic layers and devices become more complex.
KLA-Tencor offers a broad range of systems and solutions that support the metrology market. Our 5D Patterning Control Solution™ addresses five elements of patterning process control--the three geometrical dimensions of device structures, time-to-results and overall equipment efficiency--and supports advanced patterning technologies through the characterization, optimization and monitoring of fab-wide processes. The ArcherTM Series of overlay metrology tools enables characterization of overlay error on lithography process layers for advanced patterning technologies. The SpectraShapeTM family of optical CD and shape metrology systems characterizes and monitors the critical dimensions and 3D shapes of geometrically complex features incorporated by some IC manufacturers in their latest generation devices. The SpectraFilmTM and AlerisTM families of film metrology tools provide precise measurement of film thickness, refractive index, stress and composition for a broad range of film layers. The WaferSight™ PWG system measures patterned wafer geometry after a wide range of IC processes, helping identify and monitor variations that can affect patterning. Finally, K-T Analyzer® offers advanced, run-time data analysis for a wide range of metrology system types. In addition, we offer a number of other products for the metrology market, as reflected in the product table at the conclusion of this “Products” section.
In-Situ Process Monitoring
KLA-Tencor’s SensArray® SensorWafers are a portfolio of advanced wireless and wired temperature monitoring wafers that capture the effect of the process environment on production wafers. These SensorWafers provide insight into thermal uniformity and profile temperature under real production conditions. SensArray® products are used in many semiconductor and flat panel display fabrication processes, including lithography, etch and deposition.
Lithography Software
KLA-Tencor’s PROLITHTM product line provides researchers at advanced IC manufacturers, lithography hardware suppliers, track companies and material providers with virtual lithography software to explore critical-feature designs, manufacturability and process-limited yield of proposed lithographic technologies without the time and expense of printing hundreds of test wafers using experimental materials and prototype process equipment. Our ProDATA™ process window analysis software tool provides analysis of experimental data, including CD, roughness, sidewall angle, top loss and pattern collapse.
Wafer Manufacturing
KLA-Tencor’s portfolio of products focused on the demands of wafer manufacturers includes inspection, metrology and data management systems. Specialized inspection tools assess surface quality and detect, count and bin defects during the wafer manufacturing process and as a critical part of outgoing inspection. Wafer geometry tools ensure that the wafer is extremely flat and uniform in thickness, with precisely controlled surface topography. Specifications for wafer defectivity, geometry and surface quality are tightening as the dimensions of transistors become so small that the geometry of the substrate can substantially affect transistor performance.
Our wafer inspection portfolio for wafer manufacturing is anchored by the edge handling configuration of the Surfscan® SP5 and the Surfscan® SP5XP, both launched during the fiscal year ended June 30, 2016. The Surfscan® SP5 Series and Surfscan® SP3 Series are wafer inspection systems designed to enable development and production monitoring of polished wafers, epi wafers and engineered substrates. The SURFmonitorTM module (integrated on the Surfscan® SP5 Series and Surfscan® SP3 Series) characterizes wafer surface quality and captures low-contrast defects. The WaferSightTM Series offers bare wafer geometry and nanotopography metrology capabilities. FabVision® offers fab-wide data management and automated yield analysis for wafer manufacturers.

5

Table of Contents

Reticle Manufacturing
Error-free reticles, or masks, are necessary to achieving high semiconductor device yields, since reticle defects can be replicated in every die on production wafers. KLA-Tencor offers high sensitivity reticle inspection and metrology systems for mask shops, designed to help them manufacture reticles that are free of pattern defects that could print on the wafers and meet pattern placement and critical dimension uniformity specifications.
Our reticle inspection portfolio includes the TeronTM 600 Series for development and manufacturing of advanced optical and EUV masks, the TeraScanTM 500XR system for mask shop production of reticles for the 32nm node and above and our X5.2TM, X5.3™ and TeronTM SL650 Series products for reticle quality control capability for IC fabs. These products include the capability for mapping critical dimension uniformity across the reticle. In addition, we offer the LMS IPRO line of reticle metrology systems for measuring pattern placement error, including the LMS IPRO6 which measures on-device pattern features in addition to standard registration marks. If the pattern on the reticle is displaced from its intended location, overlay error can result on the wafer, which can lead to electrical continuity issues affecting yield, performance or reliability of the IC device.
LED, Power Device and Compound Semiconductor Manufacturing
LEDs are becoming more commonly used in solid-state lighting, television and notebook backlighting, and automotive applications. As LED device makers target aggressive cost and performance targets, they place significant emphasis on improved process control and yield during the manufacturing process.
KLA-Tencor offers a portfolio of systems to help LED manufacturers reduce production costs and increase product output: Candela® 8720, Klarity® LED, WI-2280, 8 Series, MicroXAM Series optical profilers and P-Series and HRP®-Series stylus profilers. The Candela® 8720 substrate and epi wafer inspection system provides automated inspection and quality control of LED substrates, detecting defects that can impact device performance, yield and field reliability. Klarity® LED is an automated defect data management and analysis system for LED yield enhancement. The WI-2280 system is designed specifically for defect inspection and 2D metrology for LED applications. The 8 Series provides patterned wafer defect inspection capability for LED manufacturing. The MicroXAM Series optical profilers measure step height, texture and form for LED applications. The P-Series and HRP®-Series stylus profilers are metrology systems for measurement of step heights and roughness for LED substrates and pattern wafer applications.
Leading power device manufacturers are targeting faster development and ramp times, high product yields and lower device costs. To achieve these goals, they are implementing solutions for characterizing yield-limiting defects and processes. Full-surface, high sensitivity defect inspection and profiler metrology systems provide accurate process feedback, enabling improvements in SiC substrate quality and optimal epitaxial growth yields on both SiC epi and GaN-on-silicon processes.
KLA-Tencor offers inspection and metrology systems to support power device manufacturing. The Candela® CS920 inspection system integrates surface defect detection and Photoluminescence technology for inspection and defect classification of a wide range of defects on SiC substrates and epi layers. The MicroXAM Series optical profilers measure step height, texture and form for power device applications. The P-Series and HRP®-Series stylus profilers measure step heights and roughness for SiC substrates and pattern wafer applications.
Finally, our primary products for compound semiconductor manufacturing include Candela® CS20, the MicroXAM Series optical profilers and the P-Series and HRP®-Series stylus profilers, used for the inspection and metrology of substrates, epi-layers and process films.
Data Storage Media/Head Manufacturing
Advancements in data storage are being driven by a wave of innovative consumer electronics with small form factors and immense storage capacities, as well as an increasing need for high-volume storage options to back up modern methods of remote computing and networking (such as cloud computing). Our process control and yield management solutions are designed to enable customers to rapidly understand and resolve complex manufacturing problems, which can help improve time to market and product yields. In the front-end and back-end of thin-film head wafer manufacturing, we offer the same process control equipment that we serve to the semiconductor industry. In addition, we offer an extensive range of test equipment and surface profilers with particular strength in photolithography. In substrate and media manufacturing, we offer metrology and defect inspection solutions with KLA-Tencor’s optical surface analyzers. Products that we offer for the data storage media/head manufacturing market manufacturing are highlighted in the product table at the conclusion of this “Products” section.

6

Table of Contents

MEMS Manufacturing
The increasing demand for MEMS technology is coming from diverse industries such as automotive, space and consumer electronics. MEMS have the potential to revolutionize nearly every product category by bringing together silicon-based microelectronics with micromachining technology, making possible the realization of complete systems-on-a-chip. KLA-Tencor offers tools and techniques for this emerging market, such as defect inspection and review, optical inspection and surface profiling, which were first developed for the integrated circuit industry. Products that we offer for MEMS manufacturing are highlighted in the product table at the conclusion of this “Products” section.
General Purpose/Lab Applications
A range of industries, including general scientific and materials research and optoelectronics, require measurements of surface topography to either control their processes or research new material characteristics. Typical measurement parameters that our tools address include flatness, roughness, curvature, peak-to-valley, asperity, waviness, texture, volume, sphericity, slope, density, stress, bearing ratio and distance (mainly in the micron to nanometer range). The profiler and in-situ process monitoring products that we offer for general purpose/lab applications are highlighted in the product table at the conclusion of this “Products” section.
K-T Certified
K-T Certified is our refurbished tools program that delivers fully refurbished, tested and certified KLA-Tencor tools to our customers. In addition to high-quality pre-owned 300mm and sub-200mm tools for the integrated circuit, reticle, substrate, MEMS and data storage markets, K-T Certified also offers system software and hardware performance upgrades to extend the capabilities of existing equipment. When a customer needs to move to the next manufacturing node, K-T Certified can help maximize the value of the customer’s existing assets through K-T Certified’s repurchase, trade-in and redeployment services.
K-T Services
Our K-T Services program enables our customers in all business sectors to maintain the high performance and productivity of our products through a flexible portfolio of services. Whether a manufacturing site is producing integrated circuits, wafers or reticles, K-T Services delivers yield management expertise spanning advanced technology nodes, including collaboration with customers to determine the best products and services to meet technology requirements and optimize cost of ownership. Our comprehensive services include service engineers, technical support teams and knowledge management systems; and an extensive parts network to ensure worldwide availability of parts.

7

Table of Contents

Product Table
MARKETS
APPLICATIONS
PRODUCTS
Chip Manufacturing
 
 
Front-End Defect Inspection
Patterned Wafer
3900 Series, 2930 Series, 2920 Series,
PumaTM 9980 Series, PumaTM 9850 Series, PumaTM 9650 Series
High Productivity and All Surface
CIRCLTM with 8 Series, CV350i, BDR300TM and Micro300 modules
8 Series (8800, 8820, 8900, 8920)
Unpatterned Wafer/Surface
Surfscan® SP3 and Surfscan® SP5 Series
SURFmonitorTM
Reticle
X5.2TM and X5.3™
TeronTM SL650 Series
Data Management
Klarity® product family
Defect Review
Electron-beam
eDR7200TM Series
Advanced Packaging
Wafer-Level Packaging
CIRCL-APTM
WI-22x0 Series
Component Inspection
ICOS® T830 and ICOS® T640
Metrology
Patterning Control
5D Patterning Control Solution™
Overlay
ArcherTM Series
Optical CD and Shape
SpectraShapeTM product family
Film Thickness/Index
SpectraFilmTM product family
AlerisTM product family
Wafer Geometry and Topography
WaferSightTM Series
SURFmonitorTM
Ion Implant and Anneal
Therma-Probe®
Surface Metrology
HRP® product family
P-Series product family
Resistivity
RS product family
Data Management
K-T Analyzer®
In-Situ Process Monitoring
Lithography
SensArray® product family
Plasma Etch
SensArray® product family
Implant and Wet
SensArray® PlasmaSuite
Lithography Software
Lithography Simulation
PROLITHTM
Process Window Analysis
ProDATATM

8

Table of Contents

MARKETS AND APPLICATIONS
PRODUCTS
Wafer Manufacturing
 
Surface and Defect Inspection
Surfscan® SP3 Series and Surfscan® SP5 Series
SURFmonitorTM
Wafer Geometry and Nanotopography Metrology
WaferSightTM Series
SURFmonitorTM
Data Management
FabVision®
Reticle Manufacturing
 
Defect Inspection
TeraScanTM 500XR and TeronTM 600 Series
Pattern Placement Metrology
LMS IPRO Series
LED, Power Device and Compound Semiconductor Manufacturing
 
Patterned Wafer Inspection
8 Series (8800, 8820, 8900, 8920)
WI product family
Defect Inspection (substrates and epi wafers)
Candela® product family
Surface Metrology
P-Series product family
MicroXAM Series
HRP® product family
Data Management
Klarity® LED
Data Storage Media/Head Manufacturing
 
Thin-Film Head Metrology and Inspection
Aleris product family
CIRCLTM with 8 Series, CV350i, BDR300 and Micro300 modules
8 Series (8800, 8820, 8900, 8920)
HRP® product family
P-Series product family
Virtual Lithography
PROLITHTM
In-Situ Process Monitoring
SensArray® product family
Transparent and Metal Substrate Inspection
Candela® product family
Data Management
Klarity® Defect
K-T Analyzer®
MEMS Manufacturing
 
Surface Metrology: Stylus Profiling
P-Series product family
HRP® product family
Surface Metrology: Optical Profiling
MicroXAM Series
Optical Inspection
8 Series (8800, 8820, 8900, 8920)
WI product family
General Purpose/Lab Applications
 
Surface Metrology: Stylus Profiling
P-Series product family
Alpha-Step® product family
HRP® product family
Surface Metrology: Optical Profiling
MicroXAM Series
Process Chamber Conditions
SensArray® product family
The product information shown in the tables above excludes some products that were solely offered through our K-T Certified refurbished tools program.

9

Table of Contents

Customers
To support our growing global customer base, we maintain a significant presence throughout Asia, the United States and Europe, staffed with local sales and applications engineers, customer and field service engineers and yield management consultants. We count among our largest customers the leading semiconductor manufacturers in each of these regions.
For the fiscal years ended June 30, 2016, 2015 and 2014, the following customers each accounted for more than 10% of total revenues:
Year ended June 30,
2016
 
2015
 
2014
Micron Technology, Inc.
 
Intel Corporation
 
Intel Corporation
Taiwan Semiconductor Manufacturing Company Limited
 
Samsung Electronics Co., Ltd.
 
Samsung Electronics Co., Ltd.

 
Taiwan Semiconductor Manufacturing Company Limited
 
Taiwan Semiconductor Manufacturing Company Limited
Our business depends upon the capital expenditures of semiconductor manufacturers, which in turn is driven by the current and anticipated market demand for ICs and products utilizing ICs. We do not consider our business to be seasonal in nature, but it is cyclical with respect to the capital equipment procurement practices of semiconductor manufacturers, and it is impacted by the investment patterns of such manufacturers in different global markets. Downturns in the semiconductor industry or slowdowns in the worldwide economy as well as customer consolidation could have a material adverse effect on our future business and financial results.
Sales, Service and Marketing
Our sales, service and marketing efforts are aimed at building long-term relationships with our customers. We focus on providing a single and comprehensive resource for the full breadth of process control and yield management products and services. Our customers benefit from the simplified planning and coordination, as well as the increased equipment compatibility, which are realized as a result of dealing with a single supplier for multiple products and services. Our revenues are derived primarily from product sales, mostly through our direct sales force.
We believe that the size and location of our field sales, service and applications engineering, and marketing organizations represent a competitive advantage in our served markets. We have direct sales forces in Asia, the United States and Europe. We maintain an export compliance program that is designed to meet the requirements of the United States Departments of Commerce and State.
As of June 30, 2016, we employed approximately 2,110 full-time sales and related personnel, service engineers and applications engineers. In addition to sales and service offices in the United States, we conduct sales, marketing and services out of wholly-owned subsidiaries or branches in other countries, including Belgium, China, Germany, Israel, Japan, Singapore, South Korea and Taiwan. International revenues accounted for approximately 82%, 71% and 76% of our total revenues in the fiscal years ended June 30, 2016, 2015 and 2014, respectively. Additional information regarding our revenues from foreign operations for our last three fiscal years can be found in Note 16, “Segment Reporting and Geographic Information” to the consolidated financial statements.
We believe that sales outside the United States will continue to be a significant percentage of our total revenues. Our future performance will depend, in part, on our ability to continue to compete successfully in Asia, one of the largest markets for our equipment. Our ability to compete in this area is dependent upon the continuation of favorable trading relationships between countries in the region and the United States, and our continuing ability to maintain satisfactory relationships with leading semiconductor companies in the region.

10

Table of Contents

International sales and operations may be adversely affected by the imposition of governmental controls, restrictions on export technology, political instability, trade restrictions, changes in tariffs and the difficulties associated with staffing and managing international operations. In addition, international sales may be adversely affected by the economic conditions in each country and by fluctuations in currency exchange rates, and such fluctuations may negatively impact our ability to compete on price with local providers or the value of revenues we generate from our international business. Although we attempt to manage some of the currency risk inherent in non-U.S. dollar product sales through hedging activities, there can be no assurance that such efforts will be adequate. These factors, as well as any of the other risk factors related to our international business and operations that are described in Item 1A, “Risk Factors,” could have a material adverse effect on our future business and financial results.
Backlog
Our shipment backlog for systems and associated warranty totaled $1.21 billion and $984 million as of June 30, 2016 and 2015, respectively, and primarily consists of sales orders where written customer requests have been received and the delivery is anticipated within the next 12 months. Orders for service contracts and unreleased products are excluded from shipment backlog. All orders are subject to cancellation or delay by the customer, often with limited or no penalties. We make adjustments for shipment backlog obtained from acquired companies, sales order cancellations, customer delivery date changes and currency adjustments. Shipment backlog is not subject to normal accounting controls for information that is either reported in or derived from our consolidated financial statements. In addition, the concept of shipment backlog is not defined in the accounting literature, making comparisons between periods and with other companies difficult and potentially misleading.
Our revenue backlog, which includes the gross value of sales orders where physical deliveries have been completed, but for which revenue has not been recognized pursuant to our policy for revenue recognition, totaled $255 million and $221 million as of June 30, 2016 and 2015, respectively. Orders for service contracts are excluded from revenue backlog.
Because customers can potentially change delivery schedules or delay or cancel orders, and because some orders are received and shipped within the same quarter, our shipment backlog at any particular date is not necessarily indicative of business volumes or actual sales for any succeeding periods. The cyclicality of the semiconductor industry combined with the lead times from our suppliers sometimes result in timing disparities between, on the one hand, our ability to manufacture, deliver and install products and, on the other, the requirements of our customers. In our efforts to balance the requirements of our customers with the availability of resources, management of our operating model and other factors, we often must exercise discretion and judgment as to the timing and prioritization of manufacturing, deliveries and installations of products, which may impact the timing of revenue recognition with respect to such products.
Research and Development
The market for yield management and process monitoring systems is characterized by rapid technological development and product innovation. These technical innovations are inherently complex and require long development cycles and appropriate professional staffing. We believe that continued and timely development of new products and enhancements to existing products are necessary to maintain our competitive position. Accordingly, we devote a significant portion of our human and financial resources to research and development programs and seek to maintain close relationships with customers to remain responsive to their needs. In addition, we may enter into certain strategic development and engineering programs whereby certain government agencies or other third parties fund a portion of our research and development costs. As of June 30, 2016, we employed approximately 1,430 full-time research and development personnel.
Our key research and development activities during the fiscal year ended June 30, 2016 involved the development of process control and yield management equipment aimed at addressing the challenges posed by shrinking device sizes, the transition to new production materials, new device and circuit architecture, more demanding lithography processes and new back-end packaging techniques. For information regarding our research and development expenses during the last three fiscal years, see Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in this Annual Report on Form 10-K.

11

Table of Contents

The strength of our competitive positions in many of our existing markets is largely due to our leading technology, which is the result of our continuing significant investments in product research and development. Even during down cycles in the semiconductor industry, we have remained committed to significant engineering efforts toward both product improvement and new product development in order to enhance our competitive position. New product introductions, however, may contribute to fluctuations in operating results, since customers may defer ordering existing products, and, if new products have reliability or quality problems, those problems may result in reduced orders, higher manufacturing costs, delays in acceptance of and payment for new products, and additional service and warranty expenses. There can be no assurance that we will successfully develop and manufacture new products, or that new products introduced by us will be accepted in the marketplace. If we do not successfully introduce new products, our results of operations will be adversely affected.
Manufacturing, Raw Materials and Supplies
We perform system design, assembly and testing in-house and utilize an outsourcing strategy for the manufacture of components and major subassemblies. Our in-house manufacturing activities consist primarily of assembling and testing components and subassemblies that are acquired through third-party vendors and integrating those subassemblies into our finished products. Our principal manufacturing activities take place in the United States (Milpitas, California), Singapore, Israel, Germany and China. As of June 30, 2016, we employed approximately 970 full-time manufacturing personnel.
Some critical parts, components and subassemblies (collectively, “parts”) that we use are designed by us and manufactured by suppliers in accordance with our specifications, while other parts are standard commercial products. We use numerous vendors to supply parts and raw materials for the manufacture and support of our products. Although we make reasonable efforts to ensure that these parts and raw materials are available from multiple suppliers, this is not always possible, and certain parts and raw materials included in our systems may be obtained only from a single supplier or a limited group of suppliers. Through our business interruption planning, we endeavor to minimize the risk of production interruption by, among other things, monitoring the financial condition of suppliers of key parts and raw materials, identifying (but not necessarily qualifying) possible alternative suppliers of such parts and materials, and ensuring adequate inventories of key parts and raw materials are available to maintain manufacturing schedules.
Although we seek to reduce our dependence on sole and limited source suppliers, in some cases the partial or complete loss of certain of these sources, or disruptions within our suppliers’ often-complex supply chains, could disrupt scheduled deliveries to customers, damage customer relationships and have a material adverse effect on our results of operations.
Competition
The worldwide market for process control and yield management systems is highly competitive. In each of our product markets, we face competition from established and potential competitors, such as Applied Materials, Inc., ASML Holding N.V., Hermes Microvision, Inc., Hitachi High-Technologies Corporation, Nanometrics, Inc. and Rudolph Technologies, Inc., some of which may have greater financial, research, engineering, manufacturing and marketing resources than we have. We may also face future competition from new market entrants from other overseas and domestic sources. We expect our competitors to continue to improve the design and performance of their current products and processes and to introduce new products and processes with improved price and performance characteristics. We believe that, to remain competitive, we will require significant financial resources to offer a broad range of products, to maintain customer service and support centers worldwide, and to invest in product and process research and development.
We believe that, while price and delivery are important competitive factors, the customers’ overriding requirement is for systems that easily and effectively incorporate automated and highly accurate inspection and metrology capabilities into their existing manufacturing processes to enhance productivity. Significant competitive factors in the market for process control and yield management systems include system performance, ease of use, reliability, interoperability with the existing installed base and technical service and support, as well as overall cost of ownership.
Management believes that we are well positioned in the market with respect to both our products and services. However, any loss of competitive position could negatively impact our prices, customer orders, revenues, gross margins and market share, any of which would negatively impact our operating results and financial condition.

12

Table of Contents

Acquisitions and Alliances
We continuously evaluate strategic acquisitions and alliances to expand our technologies, product offerings and distribution capabilities. Acquisitions involve numerous risks, including management issues and costs in connection with integration of the operations, technologies and products of the acquired companies, and the potential loss of key employees of the acquired companies. The inability to manage these risks effectively could negatively impact our operating results and financial condition.
Patents and Other Proprietary Rights
We protect our proprietary technology through reliance on a variety of intellectual property laws, including patent, copyright and trade secret. We have filed and obtained a number of patents in the United States and abroad and intend to continue pursuing the legal protection of our technology through intellectual property laws. In addition, from time to time we acquire license rights under United States and foreign patents and other proprietary rights of third parties, and we attempt to protect our trade secrets and other proprietary information through confidentiality and other agreements with our customers, suppliers, employees and consultants and through other security measures.
Although we consider patents and other intellectual property significant to our business, due to the rapid pace of innovation within the process control and yield management systems industry, we believe that our protection through patent and other intellectual property rights is less important than factors such as our technological expertise, continuing development of new systems, market penetration, installed base and the ability to provide comprehensive support and service to customers worldwide.
No assurance can be given that patents will be issued on any of our applications, that license assignments will be made as anticipated, or that our patents, licenses or other proprietary rights will be sufficiently broad to protect our technology. No assurance can be given that any patents issued to or licensed by us will not be challenged, invalidated or circumvented or that the rights granted thereunder will provide us with a competitive advantage. In addition, there can be no assurance that we will be able to protect our technology or that competitors will not be able to independently develop similar or functionally competitive technology.
Environmental Matters
We are subject to a variety of federal, state and local governmental laws and regulations related to the protection of the environment, including without limitation the management of hazardous materials that we use in our business operations. Compliance with these environmental laws and regulations has not had, and is not expected to have, a material effect on our capital expenditures, financial condition, results of operations or competitive position.
However, any failure to comply with environmental laws and regulations may subject us to a range of consequences, including fines, suspension of certain of our business activities, limitations on our ability to sell our products, obligations to remediate environmental contamination, and criminal and civil liabilities or other sanctions. In addition, changes in environmental laws and regulations could require us to invest in potentially costly pollution control equipment, alter our manufacturing processes or use substitute materials. Our failure to comply with these laws and regulations could subject us to future liabilities.
Employees
As of June 30, 2016, we employed approximately 5,580 full-time employees. Except for our employees in Belgium (where a trade union delegation has been recognized) and our employees in the German operations of our MIE business unit (who are represented by employee works council), none of our employees are represented by a labor union. We have not experienced work stoppages and believe that our employee relations are good.
Competition is intense in the recruiting of personnel in the semiconductor and semiconductor equipment industry. We believe that our future success will depend, in part, on our continued ability to hire and retain qualified management, marketing and technical employees.



13

Table of Contents

Glossary
This section provides definitions for certain industry and technical terms commonly used in our business, which are used elsewhere in this Item 1:
back-end
  
Process steps that make up the second half of the semiconductor manufacturing process, from contact through completion of the wafer prior to electrical test.
 
 
 
broadband
  
An illumination source with a wide spectral bandwidth.
 
 
 
critical dimension (CD)
  
The dimension of a specified geometry (such as the width of a patterned line or the distance between two lines) that must be within design tolerances in order to maintain semiconductor device performance consistency.
 
 
 
design rules
  
Rules that set forth the allowable dimensions of particular features used in the design and layout of integrated circuits.
 
 
 
die
  
The term for a single semiconductor chip on a wafer.
 
 
 
electron-beam
  
An illumination source comprised of a stream of electrons emitted by a single source.
 
 
 
epitaxial silicon (epi)
 
A substrate technology based on growing a crystalline silicon layer on top of a silicon wafer. The added layer, where the structure and orientation are matched to those of the silicon wafer, includes dopants (impurities) to imbue the substrate with special electronic properties.
 
 
 
excursion
  
For a manufacturing step or process, a deviation from normal operating conditions that can lead to decreased performance or yield of the final product.
 
 
 
fab
 
The main manufacturing facility for processing semiconductor wafers.
 
 
 
front-end
  
The processes that make up the first half of the semiconductor manufacturing process, from wafer start through final contact window processing.
 
 
 
in-situ
  
Refers to processing steps or tests that are done without moving the wafer. Latin for “in original position.”
 
 
 
interconnect
  
A highly conductive material, usually copper or aluminum, which carries electrical signals to different parts of a die.
 
 
 
lithography
  
A process in which a masked pattern is projected onto a photosensitive coating that covers a substrate.
 
 
 
mask shop
  
A manufacturer that produces the reticles used by semiconductor manufacturers.
 
 
 
metrology
  
The science of measurement to determine dimensions, quantity or capacity. In the semiconductor industry, typical measurements include critical dimension, overlay and film thickness.
 
 
 
microelectromechanical systems (MEMS)
 
Micron-sized mechanical devices powered by electricity, created using processes similar to those used to manufacture IC devices.
 
 
 
micron
  
A metric unit of linear measure that equals 1/1,000,000 meter (10-6m), or 10,000 angstroms (the diameter of a human hair is approximately 75 microns).
 
 
 
Moores Law
 
An observation made by Gordon Moore in 1965 and revised in 1975 that the number of transistors on a typical integrated circuit doubles approximately every two years.
 
 
 
nanometer (nm)
  
One billionth (10-9) of a meter.
 
 
 
narrowband
  
An illumination source with a narrow spectral bandwidth, such as a laser.
 
 
 

14

Table of Contents

patterned
  
For semiconductor manufacturing and industries using similar processing technologies, refers to substrates that have electronic circuits (transistors, interconnects, etc.) fabricated on the surface.
 
 
 
photoresist
  
A radiation-sensitive material that, when properly applied to a variety of substrates and then properly exposed and developed, masks portions of the substrate with a high degree of integrity.
 
 
 
process control
  
The ability to maintain specifications of products and equipment during manufacturing operations.
 
 
 
reticle
  
A very flat glass plate that contains the patterns to be reproduced on a wafer.
 
 
 
silicon-on-insulator (SOI)
 
A substrate technology comprised of a thin top silicon layer separated from the silicon substrate by a thin insulating layer of glass or silicon dioxide, used to improve performance and reduce the power consumption of IC circuits.
 
 
 
substrate
  
A wafer on which layers of various materials are added during the process of manufacturing semiconductor devices or circuits.
 
 
 
unpatterned
  
For semiconductor manufacturing and industries using similar processing technologies, refers to substrates that do not have electronic circuits (transistors, interconnects, etc.) fabricated on the surface. These can include bare silicon wafers, other bare substrates or substrates on which blanket films have been deposited.
 
 
 
yield management
  
The ability of a semiconductor manufacturer to oversee, manage and control its manufacturing processes so as to maximize the percentage of manufactured wafers or die that conform to pre-determined specifications.
__________________ 
The definitions above are from internal sources, as well as the SEMATECH Dictionary of Semiconductor Terms.







15

Table of Contents


ITEM 1A.
RISK FACTORS
A description of factors that could materially affect our business, financial condition or operating results is provided below.
Risks Associated with the Merger
There are risks and uncertainties associated with the Merger with Lam Research Corporation.
On October 21, 2015, KLA-Tencor announced it had entered into the Merger Agreement with Lam Research. Consummation of the Merger is subject to certain conditions, including (1) the expiration or termination of any waiting periods applicable to the consummation of the Merger under applicable antitrust and competition laws; and (2) the absence of any law or order restraining, enjoining or otherwise prohibiting the Merger. Each of Lam Research’s and KLA-Tencor’s obligation to consummate the Merger is also subject to certain additional customary conditions, including (1) subject to specific standards, the accuracy of the representations and warranties of the other party; and (2) performance in all material respects by the other party of its obligations under the Merger Agreement. There is no assurance that the conditions to the Merger will be satisfied in a timely manner or at all. Further, the pendency of the Merger Agreement may have an adverse effect on our business and share price. Additionally, if the Merger is not completed, we may suffer a number of consequences that could adversely affect our business, results of operations, and stock price. There are numerous risks related to the Merger, including the following:

Various conditions to the closing of the Merger may not be satisfied or waived;
If the Merger does not close on or before October 20, 2016, subject to certain limitations, either party will have the right to terminate the Merger Agreement;
The Merger may not be consummated, which among other things may cause our share price to decline to the extent that the current price of our common stock reflects an assumption that the Merger will be completed;
The failure to consummate the Merger may result in negative publicity and a negative impression of us in the investment community;
Required regulatory approvals from governmental entities may delay the Merger or result in the imposition of conditions that could cause Lam Research to abandon the Merger;
The Merger Agreement may be terminated in circumstance that would require us to pay Lam Research a termination fee of $290.0 million;
We will have incurred significant costs in connection with the acquisition that we may be unable to recover;
Our ability to attract, recruit, retain and motivate current and prospective employees may be adversely affected;
The attention of our employees and management may be diverted due to activities related to the Merger;
We may forego opportunities we might otherwise pursue absent the Merger Agreement, and may not be able to take advantage of alternative business opportunities or effectively respond to competitive pressures; and
The Merger Agreement restricts us from engaging in certain actions without Lam Research’s approval, which could prevent us from pursuing certain business opportunities outside the ordinary course of business that arise prior to the closing of the Merger.
In addition, we have incurred, and will continue to incur, significant costs, expenses and fees for professional services and other transaction costs in connection with the Merger, and these fees and costs are payable by us regardless of whether the Merger is consummated.
Several lawsuits have been filed against Lam Research and us challenging the Merger and an adverse ruling may prevent the Merger from being completed.
Lam Research, KLA-Tencor, Merger Sub 1 and Merger Sub 2, as well as the members of the KLA-Tencor Board, have been named as defendants in several lawsuits brought by KLA-Tencor stockholders. Additional lawsuits may be filed against Lam Research, KLA-Tencor, Merger Sub 1, Merger Sub 2 and the directors of one of the foregoing companies in connection with the Merger.
One of the conditions to the closing of the Merger is that no order, injunction, decree or other legal restraint or prohibition shall be in effect that prevents completion of the Merger. Consequently, if a settlement or other resolution is not reached in the lawsuits referenced above and the plaintiffs secure injunctive or other relief prohibiting, delaying or otherwise adversely affecting the defendants’ ability to complete the Merger, then such injunctive or other relief may prevent the Merger from becoming effective within the expected time frame or at all.

16

Table of Contents

The Merger is subject to the receipt of consents and clearances from domestic and foreign regulatory authorities that may impose conditions that could have an adverse effect on Lam Research, KLA-Tencor or the combined company or, if not obtained, could prevent completion of the Merger.
Before the Merger may be completed, applicable waiting periods must expire or terminate under antitrust and competition laws and various approvals or consents must be obtained from regulatory entities. In addition, at any time prior to the Merger, competition authorities may seek to enjoin completion of the Merger. In deciding whether to grant antitrust or regulatory clearances, the relevant governmental entities will consider the effect of the Merger on competition within their relevant jurisdiction. The terms and conditions of any approvals that are granted may impose requirements, limitations or costs or place restrictions on the conduct of the combined company’s business. KLA-Tencor and Lam Research have obtained consents or clearances from regulatory authorities in Germany, Israel, Ireland and Taiwan. The Merger Agreement may require KLA-Tencor and Lam Research to comply with conditions imposed by regulatory entities and, in certain circumstances, either company may refuse to close the Merger on the basis of those regulatory conditions. There can be no assurance that regulators will not impose conditions, terms, obligations or restrictions, or that such conditions, terms, obligations or restrictions will not have the effect of delaying completion of the Merger or imposing additional material costs on or materially limiting the revenues of the combined company following the Merger. In addition, we can provide no assurance that any such conditions, obligations or restrictions will not result in the delay or abandonment of the Merger.
On May 13, 2016, Lam Research and KLA-Tencor each received a request for additional information and documentary material (commonly referred to as a “Second Request”) from the United States Department of Justice (DOJ) in connection with the proposed transaction between the companies. The companies are working with the staff of the DOJ on the terms of a consent decree.
For additional information on the risks associated with our proposed Merger with Lam Research, please review the risks beginning on page 22 of the joint proxy statement/prospectus filed by Lam Research with the SEC on January 13, 2016, which risks are incorporated by reference herein and included as Exhibit 99.1 to this annual report.
Risks Associated with Our Industry
Ongoing changes in the technology industry, as well as the semiconductor industry in particular, could expose our business to significant risks.
The semiconductor equipment industry and other industries that we serve are constantly developing and changing over time. Many of the risks associated with operating in these industries are comparable to the risks faced by all technology companies, such as the uncertainty of future growth rates in the industries that we serve, pricing trends in the end-markets for consumer electronics and other products (which place a growing emphasis on our customers’ cost of ownership), changes in our customers’ capital spending patterns and, in general, an environment of constant change and development, including decreasing product and component dimensions; use of new materials; and increasingly complex device structures, applications and process steps. If we fail to appropriately adjust our cost structure and operations to adapt to any of these trends, or, with respect to technological advances, if we do not timely develop new technologies and products that successfully anticipate and address these changes, we could experience a material adverse effect on our business, financial condition and operating results.
In addition, we face a number of risks specific to ongoing changes in the semiconductor industry, as the significant majority of our sales are made to semiconductor manufacturers. Some of the trends that our management monitors in operating our business include the following:

the trend of increasing cost per transistor for leading edge technology transitions below the 28 nanometer node, a reversal of the historical trend of declining cost per transistor with each new generation of technological advancement within the semiconductor industry, and the adverse impact that such reversal may have upon our business;
the increasing cost of building and operating fabrication facilities and the impact of such increases on our customers’ investment decisions;
differing market growth rates and capital requirements for different applications, such as memory, logic and foundry;
lower level of process control adoption by our memory customers compared to our foundry and logic customers;
our customers’ reuse of existing and installed products, which may decrease their need to purchase new products or solutions at more advanced technology nodes;
the emergence of disruptive technologies that change the prevailing semiconductor manufacturing processes (or the economics associated with semiconductor manufacturing) and, as a result, also impact the inspection and metrology requirements associated with such processes;

17

Table of Contents

the higher design costs for the most advanced integrated circuits, which could economically constrain leading-edge manufacturing technology customers to focus their resources on only the large, technologically advanced products and applications;
the possible introduction of integrated products by our larger competitors that offer inspection and metrology functionality in addition to managing other semiconductor manufacturing processes;
changes in semiconductor manufacturing processes that are extremely costly for our customers to implement and, accordingly, our customers could reduce their available budgets for process control equipment by reducing inspection and metrology sampling rates for certain technologies;
the bifurcation of the semiconductor manufacturing industry into (a) leading edge manufacturers driving continued research and development into next-generation products and technologies and (b) other manufacturers that are content with existing (including previous generation) products and technologies;
the ever escalating cost of next-generation product development, which may result in joint development programs between us and our customers or government entities to help fund such programs that could restrict our control of, ownership of and profitability from the products and technologies developed through those programs;
the potential industry transition from 300mm to 450mm wafers; and
the entry by some semiconductor manufacturers into collaboration or sharing arrangements for capacity, cost or risk with other manufacturers, as well as increased outsourcing of their manufacturing activities, and greater focus only on specific markets or applications, whether in response to adverse market conditions or other market pressures.
Any of the changes described above may negatively affect our customers’ rate of investment in the capital equipment that we produce, which could result in downward pressure on our prices, customer orders, revenues and gross margins. If we do not successfully manage the risks resulting from any of these or other potential changes in our industries, our business, financial condition and operating results could be adversely impacted.
We are exposed to risks associated with a highly concentrated customer base.
Our customer base, particularly in the semiconductor industry, historically has been, and is becoming increasingly, highly concentrated due to corporate consolidation, acquisitions and business closures. In this environment, orders from a relatively limited number of manufacturers have accounted for, and are expected to continue to account for, a substantial portion of our sales. This increasing concentration exposes our business, financial condition and operating results to a number of risks, including the following:
The mix and type of customers, and sales to any single customer, may vary significantly from quarter to quarter and from year to year, which exposes our business and operating results to increased volatility tied to individual customers.
New orders from our foundry customers in the past several years have constituted a significant portion of our total orders. This concentration increases the impact that future business or technology changes within the foundry industry may have on our business, financial condition and operating results.
In a highly concentrated business environment, if a particular customer does not place an order, or if they delay or cancel orders, we may not be able to replace the business. Furthermore, because our products are configured to each customer’s specifications, any changes, delays or cancellations of orders may result in significant, non-recoverable costs.
As a result of this consolidation, the customers that survive the consolidation represent a greater portion of our sales and, consequently, have greater commercial negotiating leverage. Many of our large customers have more aggressive policies regarding engaging alternative, second-source suppliers for the products we offer and, in addition, may seek and, on occasion, receive pricing, payment, intellectual property-related or other commercial terms that may have an adverse impact on our business. Any of these changes could negatively impact our prices, customer orders, revenues and gross margins.
Certain customers have undergone significant ownership changes, created alliances with other companies, experienced management changes or have outsourced manufacturing activities, any of which may result in additional complexities in managing customer relationships and transactions. Any future change in ownership or management of our existing customers may result in similar challenges, including the possibility of the successor entity or new management deciding to select a competitor’s products.
The highly concentrated business environment also increases our exposure to risks related to the financial condition of each of our customers. For example, as a result of the challenging economic environment during fiscal year 2009, we were (and in some cases continue to be) exposed to additional risks related to the continued financial viability of certain of our customers. To the extent our customers experience liquidity issues in the future, we may be required to incur additional bad debt expense with respect to receivables owed to us by those customers. In addition, customers with liquidity issues may be forced to reduce purchases of our equipment, delay deliveries of our products, discontinue operations or may be acquired by one of our customers, and in either case such event would have the effect of further consolidating our customer base.

18

Table of Contents

Semiconductor manufacturers generally must commit significant resources to qualify, install and integrate process control and yield management equipment into a semiconductor production line. We believe that once a semiconductor manufacturer selects a particular supplier’s process control and yield management equipment, the manufacturer generally relies upon that equipment for that specific production line application for an extended period of time. Accordingly, we expect it to be more difficult to sell our products to a given customer for that specific production line application and other similar production line applications if that customer initially selects a competitor’s equipment. Similarly, we expect it to be challenging for a competitor to sell its products to a given customer for a specific production line application if that customer initially selects our equipment.
Prices differ among the products we offer for different applications due to differences in features offered or manufacturing costs. If there is a shift in demand by our customers from our higher-priced to lower-priced products, our gross margin and revenue would decrease. In addition, when products are initially introduced, they tend to have higher costs because of initial development costs and lower production volumes relative to the previous product generation, which can impact gross margin.
Any of these factors could have a material adverse effect on our business, financial condition and operating results.
The semiconductor equipment industry is highly cyclical. The purchasing decisions of our customers are highly dependent on the economies of both the local markets in which they are located and the semiconductor industry worldwide. If we fail to respond to industry cycles, our business could be seriously harmed.
The timing, length and severity of the up-and-down cycles in the semiconductor equipment industry are difficult to predict. The cyclical nature of the primary industry in which we operate is largely a function of our customers’ capital spending patterns and need for expanded manufacturing capacity, which in turn are affected by factors such as capacity utilization, consumer demand for products, inventory levels and our customers’ access to capital. This cyclicality affects our ability to accurately predict future revenue and, in some cases, future expense levels. During down cycles in our industry, the financial results of our customers may be negatively impacted, which could result not only in a decrease in, or cancellation or delay of, orders (which are generally subject to cancellation or delay by the customer with limited or no penalty) but also a weakening of their financial condition that could impair their ability to pay for our products or our ability to recognize revenue from certain customers. Our ability to recognize revenue from a particular customer may also be negatively impacted by the customer’s funding status, which could be weakened not only by adverse business conditions or inaccessibility to capital markets for any number of macroeconomic or company-specific reasons, but also by funding limitations imposed by the customer’s unique corporate structure. Any of these factors could negatively impact our business, operating results and financial condition.
When cyclical fluctuations result in lower than expected revenue levels, operating results may be adversely affected and cost reduction measures may be necessary in order for us to remain competitive and financially sound. During periods of declining revenues, we must be in a position to adjust our cost and expense structure to prevailing market conditions and to continue to motivate and retain our key employees. If we fail to respond, or if our attempts to respond fail to accomplish our intended results, then our business could be seriously harmed. Furthermore, any workforce reductions and cost reduction actions that we adopt in response to down cycles may result in additional restructuring charges, disruptions in our operations and loss of key personnel. In addition, during periods of rapid growth, we must be able to increase manufacturing capacity and personnel to meet customer demand. We can provide no assurance that these objectives can be met in a timely manner in response to industry cycles. Each of these factors could adversely impact our operating results and financial condition.

19

Table of Contents

In addition, our management typically provides quarterly forecasts for certain financial metrics, which, when made, are based on business and operational forecasts that are believed to be reasonable at the time. However, largely due to the cyclicality of our business and the industries in which we operate, and the fact that business conditions in our industries can change very rapidly as part of these cycles, our actual results may vary (and have varied in the past) from forecasted results. These variations can occur for any number of reasons, including, but not limited to, unexpected changes in the volume or timing of customer orders, product shipments or product acceptances; an inability to adjust our operations rapidly enough to adapt to changing business conditions; or a different than anticipated effective tax rate. The impact on our business of delays or cancellations of customer orders may be exacerbated by the short lead times that our customers expect between order placement and product shipment. This is because order delays and cancellations may lead not only to lower revenues, but also, due to the advance work we must do in anticipation of receiving a product order in order to meet the expected lead times, to significant inventory write-offs and manufacturing inefficiencies that decrease our gross margin. Any of these factors could materially and adversely affect our financial results for a particular quarter and could cause those results to differ materially from financial forecasts we have previously provided. We provide these forecasts with the intent of giving investors and analysts a better understanding of management’s expectations for the future, but parties reviewing such forecasts must recognize that such forecasts are comprised of, and are themselves, forward-looking statements subject to the risks and uncertainties described in this Item 1A and elsewhere in this report and in our other public filings and public statements. If our operating or financial results for a particular period differ from our forecasts or the expectations of investment analysts, or if we revise our forecasts, the market price of our common stock could decline.
Risks Related to Our Business Model and Capital Structure
If we do not develop and introduce new products and technologies in a timely manner in response to changing market conditions or customer requirements, our business could be seriously harmed.
Success in the semiconductor equipment industry depends, in part, on continual improvement of existing technologies and rapid innovation of new solutions. The primary driver of technology advancement in the semiconductor industry has been to shrink the lithography that prints the circuit design on semiconductor chips. That driver appears to be slowing, which may cause semiconductor manufacturers to delay investments in equipment, investigate more complex device architectures, use new materials and develop innovative fabrication processes. These and other evolving customer plans and needs require us to respond with continued development programs and cut back or discontinue older programs, which may no longer have industry-wide support. Technical innovations are inherently complex and require long development cycles and appropriate staffing of highly qualified employees. Our competitive advantage and future business success depend on our ability to accurately predict evolving industry standards, develop and introduce new products and solutions that successfully address changing customer needs, win market acceptance of these new products and solutions, and manufacture these new products in a timely and cost-effective manner. Our failure to accurately predict evolving industry standards and develop as well as offer competitive technology solutions in a timely manner with cost-effective products could result in loss of market share, unanticipated costs, and inventory obsolescence, which would adversely impact our business, operating results and financial condition.
In this environment, we must continue to make significant investments in research and development in order to enhance the performance, features and functionality of our products, to keep pace with competitive products and to satisfy customer demands. Substantial research and development costs typically are incurred before we confirm the technical feasibility and commercial viability of a new product, and not all development activities result in commercially viable products. There can be no assurance that revenues from future products or product enhancements will be sufficient to recover the development costs associated with such products or enhancements. In addition, we cannot be sure that these products or enhancements will receive market acceptance or that we will be able to sell these products at prices that are favorable to us. Our business will be seriously harmed if we are unable to sell our products at favorable prices or if the market in which we operate does not accept our products.
In addition, the complexity of our products exposes us to other risks. We regularly recognize revenue from a sale upon shipment of the applicable product to the customer (even before receiving the customer’s formal acceptance of that product) in certain situations, including sales of products for which installation is considered perfunctory, transactions in which the product is sold to an independent distributor and we have no installation obligations, and sales of products where we have previously delivered the same product to the same customer location and that prior delivery has been accepted. However, our products are very technologically complex and rely on the interconnection of numerous subcomponents (all of which must perform to their respective specifications), so it is conceivable that a product for which we recognize revenue upon shipment may ultimately fail to meet the overall product’s required specifications. In such a situation, the customer may be entitled to certain remedies, which could materially and adversely affect our operating results for various periods and, as a result, our stock price.

20

Table of Contents

We derive a substantial percentage of our revenues from sales of inspection products. As a result, any delay or reduction of sales of these products could have a material adverse effect on our business, financial condition and operating results. The continued customer demand for these products and the development, introduction and market acceptance of new products and technologies are critical to our future success.
Our success is dependent in part on our technology and other proprietary rights. If we are unable to maintain our lead or protect our proprietary technology, we may lose valuable assets.
Our success is dependent in part on our technology and other proprietary rights. We own various United States and international patents and have additional pending patent applications relating to some of our products and technologies. The process of seeking patent protection is lengthy and expensive, and we cannot be certain that pending or future applications will actually result in issued patents or that issued patents will be of sufficient scope or strength to provide meaningful protection or commercial advantage to us. Other companies and individuals, including our larger competitors, may develop technologies and obtain patents relating to our business that are similar or superior to our technology or may design around the patents we own, adversely affecting our business. In addition, we at times engage in collaborative technology development efforts with our customers and suppliers, and these collaborations may constitute a key component of certain of our ongoing technology and product research and development projects. The termination of any such collaboration, or delays caused by disputes or other unanticipated challenges that may arise in connection with any such collaboration, could significantly impair our research and development efforts, which could have a material adverse impact on our business and operations.
We also maintain trademarks on certain of our products and services and claim copyright protection for certain proprietary software and documentation. However, we can give no assurance that our trademarks and copyrights will be upheld or successfully deter infringement by third parties.
While patent, copyright and trademark protection for our intellectual property is important, we believe our future success in highly dynamic markets is most dependent upon the technical competence and creative skills of our personnel. We attempt to protect our trade secrets and other proprietary information through confidentiality and other agreements with our customers, suppliers, employees and consultants and through other security measures. We also maintain exclusive and non-exclusive licenses with third parties for strategic technology used in certain products. However, these employees, consultants and third parties may breach these agreements, and we may not have adequate remedies for wrongdoing. In addition, the laws of certain territories in which we develop, manufacture or sell our products may not protect our intellectual property rights to the same extent as do the laws of the United States. In any event, the extent to which we can protect our trade secrets through the use of confidentiality agreements is limited, and our success will depend to a significant extent on our ability to innovate ahead of our competitors.
Our future performance depends, in part, upon our ability to continue to compete successfully worldwide.
Our industry includes large manufacturers with substantial resources to support customers worldwide. Some of our competitors are diversified companies with greater financial resources and more extensive research, engineering, manufacturing, marketing, and customer service and support capabilities than we possess. We face competition from companies whose strategy is to provide a broad array of products and services, some of which compete with the products and services that we offer. These competitors may bundle their products in a manner that may discourage customers from purchasing our products, including pricing such competitive tools significantly below our product offerings. In addition, we face competition from smaller emerging semiconductor equipment companies whose strategy is to provide a portion of the products and services that we offer, using innovative technology to sell products into specialized markets. The strength of our competitive positions in many of our existing markets is largely due to our leading technology, which is the result of continuing significant investments in product research and development. However, we may enter new markets, whether through acquisitions or new internal product development, in which competition is based primarily on product pricing, not technological superiority. Further, some new growth markets that emerge may not require leading technologies. Loss of competitive position in any of the markets we serve, or an inability to sell our products on favorable commercial terms in new markets we may enter, could negatively affect our prices, customer orders, revenues, gross margins and market share, any of which would negatively affect our operating results and financial condition.

21

Table of Contents

Our business would be harmed if we do not receive parts sufficient in number and performance to meet our production requirements and product specifications in a timely and cost-effective manner.
We use a wide range of materials in the production of our products, including custom electronic and mechanical components, and we use numerous suppliers to supply these materials. We generally do not have guaranteed supply arrangements with our suppliers. Because of the variability and uniqueness of customers’ orders, we do not maintain an extensive inventory of materials for manufacturing. Through our business interruption planning, we seek to minimize the risk of production and service interruptions and/or shortages of key parts by, among other things, monitoring the financial stability of key suppliers, identifying (but not necessarily qualifying) possible alternative suppliers and maintaining appropriate inventories of key parts. Although we make reasonable efforts to ensure that parts are available from multiple suppliers, certain key parts are available only from a single supplier or a limited group of suppliers. Also, key parts we obtain from some of our suppliers incorporate the suppliers’ proprietary intellectual property; in those cases we are increasingly reliant on third parties for high-performance, high-technology components, which reduces the amount of control we have over the availability and protection of the technology and intellectual property that is used in our products. In addition, if certain of our key suppliers experience liquidity issues and are forced to discontinue operations, which is a heightened risk during economic downturns, it could affect their ability to deliver parts and could result in delays for our products. Similarly, especially with respect to suppliers of high-technology components, our suppliers themselves have increasingly complex supply chains, and delays or disruptions at any stage of their supply chains may prevent us from obtaining parts in a timely manner and result in delays for our products. Our operating results and business may be adversely impacted if we are unable to obtain parts to meet our production requirements and product specifications, or if we are only able to do so on unfavorable terms. Furthermore, a supplier may discontinue production of a particular part for any number of reasons, including the supplier’s financial condition or business operational decisions, which would require us to purchase, in a single transaction, a large number of such discontinued parts in order to ensure that a continuous supply of such parts remains available to our customers. Such “end-of-life” parts purchases could result in significant expenditures by us in a particular period, and ultimately any unused parts may result in a significant inventory write-off, either of which could have a material and adverse impact on our financial condition and results of operations for the applicable periods.
If we fail to operate our business in accordance with our business plan, our operating results, business and stock price may be significantly and adversely impacted.
We attempt to operate our business in accordance with a business plan that is established annually, revised frequently (generally quarterly), and reviewed by management even more frequently (at least monthly). Our business plan is developed based on a number of factors, many of which require estimates and assumptions, such as our expectations of the economic environment, future business levels, our customers’ willingness and ability to place orders, lead-times, and future revenue and cash flow. Our budgeted operating expenses, for example, are based in part on our future revenue expectations. However, our ability to achieve our anticipated revenue levels is a function of numerous factors, including the volatile and cyclical nature of our primary industry, customer order cancellations, macroeconomic changes, operational matters regarding particular agreements, our ability to manage customer deliveries, the availability of resources for the installation of our products, delays or accelerations by customers in taking deliveries and the acceptance of our products (for products where customer acceptance is required before we can recognize revenue from such sales), our ability to operate our business and sales processes effectively, and a number of the other risk factors set forth in this Item 1A.
Because our expenses are in most cases relatively fixed in the short term, any revenue shortfall below expectations could have an immediate and significant adverse effect on our operating results. Similarly, if we fail to manage our expenses effectively or otherwise fail to maintain rigorous cost controls, we could experience greater than anticipated expenses during an operating period, which would also negatively affect our results of operations. If we fail to operate our business consistent with our business plan, our operating results in any period may be significantly and adversely impacted. Such an outcome could cause customers, suppliers or investors to view us as less stable, or could cause us to fail to meet financial analysts’ revenue or earnings estimates, any of which could have a material adverse impact on our business, financial condition or stock price.
In addition, our management is constantly striving to balance the requirements and demands of our customers with the availability of resources, the need to manage our operating model and other factors. In furtherance of those efforts, we often must exercise discretion and judgment as to the timing and prioritization of manufacturing, deliveries, installations and payment scheduling. Any such decisions may impact our ability to recognize revenue, including the fiscal period during which such revenue may be recognized, with respect to such products, which could have a material adverse effect on our business, financial condition or stock price.

22

Table of Contents

Our outstanding indebtedness was substantially increased in the second quarter of our fiscal year ended June 30, 2015 and, as a result, our capital structure is more highly leveraged.
As of June 30, 2016, we had $3.08 billion aggregate principal amount of outstanding indebtedness, consisting of $2.50 billion aggregate principal amount of senior, unsecured long-term notes and $576.3 million of term loans under a Credit Agreement (the “Credit Agreement”). Additionally, we have commitments for an unfunded revolving credit facility of $500.0 million under the Credit Agreement. We may incur additional indebtedness in the future by accessing the unfunded revolving credit facility under the Credit Agreement and/or entering into new financing arrangements. Our ability to pay interest and repay the principal of our current indebtedness is dependent upon our ability to manage our business operations, our credit rating, the ongoing interest rate environment and the other risk factors discussed in this section. There can be no assurance that we will be able to manage any of these risks successfully.
In addition, the interest rates of the senior, unsecured long-term notes may be subject to adjustments from time to time if Moody’s Investors Service, Inc. (“Moody’s”), Standard & Poor’s Ratings Services (“S&P”) or, under certain circumstances, a substitute rating agency selected by us as a replacement for Moody’s or S&P, as the case may be (a “Substitute Rating Agency”), downgrades (or subsequently upgrades) its rating assigned to the respective series of notes such that the adjusted rating is below investment grade. Accordingly, changes by Moody’s, S&P, or a Substitute Rating Agency to the rating of any series of notes, our outlook or credit rating could require us to pay additional interest, which may negatively affect the value and liquidity of our debt and the market price of our common stock could decline. Factors that can affect our credit rating include changes in our operating performance, the economic environment, conditions in the semiconductor and semiconductor equipment industries, our financial position, including the incurrence of additional indebtedness, and our business strategy.
In certain circumstances involving a change of control followed by a downgrade of the rating of a series of notes by at least two of Moody’s, S&P and Fitch Inc., unless we have exercised its right to redeem the notes of such series, we will be required to make an offer to repurchase all or, at the holder’s option, any part, of each holder’s notes of that series pursuant to the offer described below (the “Change of Control Offer”). In the Change of Control Offer, we will be required to offer payment in cash equal to 101% of the aggregate principal amount of notes repurchased plus accrued and unpaid interest, if any, on the notes repurchased, up to, but not including, the date of repurchase. We cannot make any assurance that we will have sufficient financial resources at such time or will be able to arrange financing to pay the repurchase price of that series of notes. Our ability to repurchase that series of notes in such event may be limited by law, by the indenture associated with that series of notes, or by the terms of other agreements to which we may be party at such time. If we fail to repurchase that series of notes as required by the terms of such notes, it would constitute an event of default under the indenture governing that series of notes which, in turn, may also constitute an event of default under other of our obligations.
The term loans under the Credit Agreement bear interest at a floating rate, which is based on the London Interbank Offered Rate plus a fixed spread, and, therefore, any increase in interest rates would require us to pay additional interest, which may have an adverse effect on the value and liquidity of our debt and the market price of our common stock could decline. The interest rate under the Credit Facility is also subject to an adjustment in conjunction with our credit rating downgrades or upgrades. Additionally, under the Credit Agreement, we are required to comply with affirmative and negative covenants, which include the maintenance of certain financial ratios, the details of which can be found in Note 6, “Debt.” If we fail to comply with these covenants, we will be in default and our borrowings will become immediately due and payable. There can be no assurance that we will have sufficient financial resources or we will be able to arrange financing to repay our borrowings at such time. In addition, certain of our domestic subsidiaries under the Credit Agreement are required to guarantee our borrowings under the Credit Agreement. In the event that we default on our borrowings, these domestic subsidiaries shall be liable for our borrowings, which could disrupt our operations and result in a material adverse impact on our business, financial condition or stock price.
Our leveraged capital structure may adversely affect our financial condition, results of operations and net income per share.
We completed our leveraged recapitalization transaction during the fiscal quarter ended December 31, 2014, which included raising $3.25 billion in new borrowings, consisting of $2.50 billion aggregate principal amount of senior, unsecured long-term notes and $750.0 million of term loans under the Credit Agreement, payment of a special cash dividend of approximately $2.76 billion and prepayment of our $750 million of existing senior notes due in 2018. Our issuance and maintenance of higher levels of indebtedness could have adverse consequences including, but not limited to:
a negative impact on our ability to satisfy our future obligations;
an increase in the portion of our cash flows that may have to be dedicated to increased interest and principal payments that may not be available for operations, working capital, capital expenditures, acquisitions, investments, dividends, stock repurchases, general corporate or other purposes;

23

Table of Contents

an impairment of our ability to obtain additional financing in the future; and
obligations to comply with restrictive and financial covenants as noted in the above risk factor and Note 6, “Debt.”
Our ability to satisfy our future expenses as well as our new debt obligations will depend on our future performance, which will be affected by financial, business, economic, regulatory and other factors. Furthermore, our future operations may not generate sufficient cash flows to enable us to meet our future expenses and service our new debt obligations, which may impact our ability to manage our capital structure to preserve and maintain our investment grade rating. If our future operations do not generate sufficient cash flows, we may need to access the unfunded revolving credit facility of $500 million under the Credit Agreement or enter into new financing arrangements to obtain necessary funds. If we determine it is necessary to seek additional funding for any reason, we may not be able to obtain such funding or, if funding is available, we may not be able to obtain it on acceptable terms. Any additional borrowing under the Credit Agreement will place further pressure on us to comply with the financial covenants. If we fail to make a payment associated with our new debt obligations, we could be in default on such debt, and such a default could cause us to be in default on our other outstanding indebtedness.
There can be no assurance that we will continue to declare cash dividends at all or in any particular amounts.
Our Board of Directors first instituted a quarterly dividend during the fiscal year ended June 30, 2005. Since that time, we have announced a number of increases in the amount of our quarterly dividend level as well as payment of a special cash dividend that was declared and substantially paid in the second quarter of our fiscal year ended June 30, 2015. We intend to continue to pay quarterly dividends subject to capital availability and periodic determinations by our Board of Directors that cash dividends are in the best interest of our stockholders and are in compliance with all laws and agreements applicable to the declaration and payment of cash dividends by us. Future dividends may be affected by, among other factors: our views on potential future capital requirements for investments in acquisitions and the funding of our research and development; legal risks; stock repurchase programs; changes in federal and state income tax laws or corporate laws; changes to our business model; restrictions on increasing dividends under the Merger Agreement; and our increased interest and principal payments required by our $3.08 billion aggregate principal amount of outstanding indebtedness and any additional indebtedness that we may incur in the future. Our dividend payments may change from time to time, and we cannot provide assurance that we will continue to declare dividends at all or in any particular amounts. A reduction in our dividend payments could have a negative effect on our stock price.
We are exposed to risks related to our commercial terms and conditions, including our indemnification of third parties, as well as the performance of our products.
Although our standard commercial documentation sets forth the terms and conditions that we intend to apply to commercial transactions with our business partners, counterparties to such transactions may not explicitly agree to our terms and conditions. In situations where we engage in business with a third party without an explicit master agreement regarding the applicable terms and conditions, or where the commercial documentation applicable to the transaction is subject to varying interpretations, we may have disputes with those third parties regarding the applicable terms and conditions of our business relationship with them. Such disputes could lead to a deterioration of our commercial relationship with those parties, costly and time-consuming litigation, or additional concessions or obligations being offered by us to resolve such disputes, or could impact our revenue or cost recognition. Any of these outcomes could materially and adversely affect our business, financial condition and results of operations.
In addition, in our commercial agreements, from time to time in the normal course of business we indemnify third parties with whom we enter into contractual relationships, including customers, suppliers and lessors, with respect to certain matters. We have agreed, under certain conditions, to hold these third parties harmless against specified losses, such as those arising from a breach of representations or covenants, other third party claims that our products when used for their intended purposes infringe the intellectual property rights of such other third parties, or other claims made against certain parties. We may be compelled to enter into or accrue for probable settlements of alleged indemnification obligations, or we may be subject to potential liability arising from our customers’ involvements in legal disputes. In addition, notwithstanding the provisions related to limitations on our liability that we seek to include in our business agreements, the counterparties to such agreements may dispute our interpretation or application of such provisions, and a court of law may not interpret or apply such provisions in our favor, any of which could result in an obligation for us to pay material damages to third parties and engage in costly legal proceedings. It is difficult to determine the maximum potential amount of liability under any indemnification obligations, whether or not asserted, due to our limited history of prior indemnification claims and the unique facts and circumstances that are likely to be involved in any particular claim. Our business, financial condition and results of operations in a reported fiscal period could be materially and adversely affected if we expend significant amounts in defending or settling any purported claims, regardless of their merit or outcomes.

24

Table of Contents

We are also exposed to potential costs associated with unexpected product performance issues. Our products and production processes are extremely complex and thus could contain unexpected product defects, especially when products are first introduced. Unexpected product performance issues could result in significant costs being incurred by us, including increased service or warranty costs, providing product replacements for (or modifications to) defective products, litigation related to defective products, reimbursement for damages caused by our products, product recalls, or product write-offs or disposal costs. These costs could be substantial and could have an adverse impact upon our business, financial condition and operating results. In addition, our reputation with our customers could be damaged as a result of such product defects, which could reduce demand for our products and negatively impact our business.
Furthermore, we occasionally enter into volume purchase agreements with our larger customers, and these agreements may provide for certain volume purchase incentives, such as credits toward future purchases. We believe that these arrangements are beneficial to our long-term business, as they are designed to encourage our customers to purchase higher volumes of our products. However, these arrangements could require us to recognize a reduced level of revenue for the products that are initially purchased, to account for the potential future credits or other volume purchase incentives. As a result, these volume purchase arrangements, while expected to be beneficial to our business over time, could materially and adversely affect our results of operations in near-term periods, including the revenue we can recognize on product sales and therefore our gross margins.
In addition, we may, in limited circumstances, enter into agreements that contain customer-specific commitments on pricing, tool reliability, spare parts stocking levels, response time and other commitments. Furthermore, we may give these customers limited audit or inspection rights to enable them to confirm that we are complying with these commitments. If a customer elects to exercise its audit or inspection rights, we may be required to expend significant resources to support the audit or inspection, as well as to defend or settle any dispute with a customer that could potentially arise out of such audit or inspection. To date, we have made no significant accruals in our consolidated financial statements for this contingency. While we have not in the past incurred significant expenses for resolving disputes regarding these types of commitments, we cannot make any assurance that we will not incur any such liabilities in the future. Our business, financial condition and results of operations in a reported fiscal period could be materially and adversely affected if we expend significant amounts in supporting an audit or inspection, or defending or settling any purported claims, regardless of their merit or outcomes.
There are risks associated with our receipt of government funding for research and development.
We are exposed to additional risks related to our receipt of external funding for certain strategic development programs from various governments and government agencies, both domestically and internationally. Governments and government agencies typically have the right to terminate funding programs at any time in their sole discretion, or a project may be terminated by mutual agreement if the parties determine that the project’s goals or milestones are not being achieved, so there is no assurance that these sources of external funding will continue to be available to us in the future. In addition, under the terms of these government grants, the applicable granting agency typically has the right to audit the costs that we incur, directly and indirectly, in connection with such programs. Any such audit could result in modifications to, or even termination of, the applicable government funding program. For example, if an audit were to identify any costs as being improperly allocated to the applicable program, those costs would not be reimbursed, and any such costs that had already been reimbursed would have to be refunded. We do not know the outcome of any future audits. Any adverse finding resulting from any such audit could lead to penalties (financial or otherwise), termination of funding programs, suspension of payments, fines and suspension or prohibition from receiving future government funding from the applicable government or government agency, any of which could adversely impact our operating results, financial condition and ability to operate our business.

25

Table of Contents

We have recorded significant restructuring, inventory write-off and asset impairment charges in the past and may do so again in the future, which could have a material negative impact on our business.
Historically, we recorded material restructuring charges related to our prior global workforce reductions, large excess inventory write-offs, and material impairment charges related to our goodwill and purchased intangible assets. During the fourth quarter of fiscal year ended 2015, we implemented a plan to reduce our global employee workforce to streamline our organization and business processes in response to changing customer requirements in our industry. We substantially completed the global employee workforce reduction during the fiscal year ended June 30, 2016 and recorded net restructuring charges of $8.9 million during the same period. Such workforce changes can also temporarily reduce workforce productivity, which could be disruptive to our business and adversely affect our results of operations. In addition, we may not achieve or sustain the expected cost savings or other benefits of our restructuring plans, or do so within the expected time frame. If we again restructure our organization and business processes, implement additional cost reduction actions or discontinue certain business operations, we may take additional, potentially material, restructuring charges related to, among other things, employee terminations or exit costs. We may also be required to write-off additional inventory if our product build plans or usage of service inventory decline. Also, as our lead times from suppliers increase (due to the increasing complexity of the parts and components they provide) and the lead times demanded by our customers decrease (due to the time pressures they face when introducing new products or technology or bringing new facilities into production), we may be compelled to increase our commitments, and therefore our risk exposure, to inventory purchases to meet our customers’ demands in a timely manner, and that inventory may need to be written-off if demand for the underlying product declines for any reason. Such additional write-offs could constitute material charges.
As noted above, in the past, we recorded a material charge related to the impairment of our goodwill and purchased intangible assets. Goodwill represents the excess of costs over the net fair value of net assets acquired in a business combination. Goodwill is not amortized, but is instead tested for impairment at least annually in accordance with authoritative guidance for goodwill. Purchased intangible assets with estimable useful lives are amortized over their respective estimated useful lives based on economic benefit if known or using the straight-line method, and are reviewed for impairment in accordance with authoritative guidance for long-lived assets. The valuation of goodwill and intangible assets requires assumptions and estimates of many critical factors, including revenue and market growth, operating cash flows, market multiples, and discount rates. A substantial decline in our stock price, or any other adverse change in market conditions, particularly if such change has the effect of changing one of the critical assumptions or estimates we previously used to calculate the value of our goodwill or intangible assets (and, as applicable, the amount of any previous impairment charge), could result in a change to the estimation of fair value that could result in an additional impairment charge.
Any such additional material charges, whether related to restructuring or goodwill or purchased intangible asset impairment, may have a material negative impact on our operating results and related financial statements.
We are exposed to risks related to our financial arrangements with respect to receivables factoring and banking arrangements.
We enter into factoring arrangements with financial institutions to sell certain of our trade receivables and promissory notes from customers without recourse. In addition, we maintain bank accounts with several domestic and foreign financial institutions, any of which may prove not to be financially viable. If we were to stop entering into these factoring arrangements, our operating results, financial condition and cash flows could be adversely impacted by delays or failures in collecting trade receivables. However, by entering into these arrangements, and by engaging these financial institutions for banking services, we are exposed to additional risks. If any of these financial institutions experiences financial difficulties or is otherwise unable to honor the terms of our factoring or deposit arrangements, we may experience material financial losses due to the failure of such arrangements or a lack of access to our funds, any of which could have an adverse impact upon our operating results, financial condition and cash flows.

26

Table of Contents

We are subject to the risks of additional government actions in the event we were to breach the terms of any settlement arrangement into which we have entered.
In connection with the settlement of certain government actions and other legal proceedings related to our historical stock option practices, we have explicitly agreed as a condition to such settlements that we will comply with certain laws, such as the books and records provisions of the federal securities laws. If we were to violate any such law, we might not only be subject to the significant penalties applicable to such violation, but our past settlements may also be impacted by such violation, which could give rise to additional government actions or other legal proceedings. Any such additional actions or proceedings may require us to expend significant management time and incur significant accounting, legal and other expenses, and may divert attention and resources from the operation of our business. These expenditures and diversions, as well as an adverse resolution of any such action or proceeding, could have a material adverse effect on our business, financial condition and results of operations.
General Commercial, Operational, Financial and Regulatory Risks
We are exposed to risks associated with a weakening in the condition of the financial markets and the global economy.
The markets for semiconductors, and therefore our business, are ultimately driven by the global demand for electronic devices by consumers and businesses. Economic uncertainty frequently leads to reduced consumer and business spending, which caused our customers to decrease, cancel or delay their equipment and service orders from us in the economic slowdown during fiscal year 2009. In addition, the tightening of credit markets and concerns regarding the availability of credit that accompanied that slowdown made it more difficult for our customers to raise capital, whether debt or equity, to finance their purchases of capital equipment, including the products we sell. Reduced demand, combined with delays in our customers’ ability to obtain financing (or the unavailability of such financing), has at times in the past adversely affected our product and service sales and revenues and therefore has harmed our business and operating results, and our operating results and financial condition may again be adversely impacted if economic conditions decline from their current levels.
In addition, a decline in the condition of the global financial markets could adversely impact the market values or liquidity of our investments. Our investment portfolio includes corporate and government securities, money market funds and other types of debt and equity investments. Although we believe our portfolio continues to be comprised of sound investments due to the quality and (where applicable) credit ratings, a decline in the capital and financial markets would adversely impact the market value of our investments and their liquidity. If the market value of such investments were to decline, or if we were to have to sell some of our investments under illiquid market conditions, we may be required to recognize an impairment charge on such investments or a loss on such sales, either of which could have an adverse effect on our financial condition and operating results.
If we are unable to timely and appropriately adapt to changes resulting from difficult macroeconomic conditions, our business, financial condition or results of operations may be materially and adversely affected.
A majority of our annual revenues are derived from outside the United States, and we maintain significant operations outside the United States. We are exposed to numerous risks as a result of the international nature of our business and operations.
A majority of our annual revenues are derived from outside the United States, and we maintain significant operations outside the United States. We expect that these conditions will continue in the foreseeable future. Managing global operations and sites located throughout the world presents a number of challenges, including but not limited to:
managing cultural diversity and organizational alignment;
exposure to the unique characteristics of each region in the global semiconductor market, which can cause capital equipment investment patterns to vary significantly from period to period;
periodic local or international economic downturns;
potential adverse tax consequences, including withholding tax rules that may limit the repatriation of our earnings, and higher effective income tax rates in foreign countries where we do business;
government controls, either by the United States or other countries, that restrict our business overseas or the import or export of semiconductor products or increase the cost of our operations;
compliance with customs regulations in the countries in which we do business;
tariffs or other trade barriers (including those applied to our products or to parts and supplies that we purchase);
political instability, natural disasters, legal or regulatory changes, acts of war or terrorism in regions where we have operations or where we do business;


27

Table of Contents

fluctuations in interest and currency exchange rates may adversely impact our ability to compete on price with local providers or the value of revenues we generate from our international business. Although we attempt to manage some of our near-term currency risks through the use of hedging instruments, there can be no assurance that such efforts will be adequate;
longer payment cycles and difficulties in collecting accounts receivable outside of the United States;
difficulties in managing foreign distributors (including monitoring and ensuring our distributors’ compliance with all applicable United States and local laws); and
inadequate protection or enforcement of our intellectual property and other legal rights in foreign jurisdictions.
Any of the factors above could have a significant negative impact on our business and results of operations.
We might be involved in claims or disputes related to intellectual property or other confidential information that may be costly to resolve, prevent us from selling or using the challenged technology and seriously harm our operating results and financial condition.
As is typical in the semiconductor equipment industry, from time to time we have received communications from other parties asserting the existence of patent rights, copyrights, trademark rights or other intellectual property rights which they believe cover certain of our products, processes, technologies or information. In addition, we occasionally receive notification from customers who believe that we owe them indemnification or other obligations related to intellectual property claims made against such customers by third parties. With respect to intellectual property infringement disputes, our customary practice is to evaluate such infringement assertions and to consider whether to seek licenses where appropriate. However, we cannot ensure that licenses can be obtained or, if obtained, will be on acceptable terms or that costly litigation or other administrative proceedings will not occur. The inability to obtain necessary licenses or other rights on reasonable terms could seriously harm our results of operations and financial condition. Furthermore, we may potentially be subject to claims by customers, suppliers or other business partners, or by governmental law enforcement agencies, related to our receipt, distribution and/or use of third-party intellectual property or confidential information. Legal proceedings and claims, regardless of their merit, and associated internal investigations with respect to intellectual property or confidential information disputes are often expensive to prosecute, defend or conduct; may divert management’s attention and other company resources; and/or may result in restrictions on our ability to sell our products, settlements on significantly adverse terms or adverse judgments for damages, injunctive relief, penalties and fines, any of which could have a significant negative effect on our business, results of operations and financial condition. There can be no assurance regarding the outcome of future legal proceedings, claims or investigations. The instigation of legal proceedings or claims, our inability to favorably resolve or settle such proceedings or claims, or the determination of any adverse findings against us or any of our employees in connection with such proceedings or claims could materially and adversely affect our business, financial condition and results of operations, as well as our business reputation.
We are exposed to various risks related to the legal (including environmental), regulatory and tax environments in which we perform our operations and conduct our business.
We are subject to various risks related to compliance with new, existing, different, inconsistent or even conflicting laws, rules and regulations enacted by legislative bodies and/or regulatory agencies in the countries in which we operate and with which we must comply, including environmental, safety, antitrust, anti-corruption/anti-bribery, unclaimed property and export control regulations. Our failure or inability to comply with existing or future laws, rules or regulations, or changes to existing laws, rules or regulations (including changes that result in inconsistent or conflicting laws, rules or regulations), in the countries in which we operate could result in violations of contractual or regulatory obligations that may adversely affect our operating results, financial condition and ability to conduct our business. From time to time, we may receive inquiries or audit notices from governmental or regulatory bodies, or we may participate in voluntary disclosure programs, related to legal, regulatory or tax compliance matters, and these inquiries, notices or programs may result in significant financial cost (including investigation expenses, defense costs, assessments and penalties), reputational harm and other consequences that could materially and adversely affect our operating results and financial condition.

28

Table of Contents

Our properties and many aspects of our business operations are subject to various domestic and international environmental laws and regulations, including those that control and restrict the use, transportation, emission, discharge, storage and disposal of certain chemicals, gases and other substances. Any failure to comply with applicable environmental laws, regulations or requirements may subject us to a range of consequences, including fines, suspension of certain of our business activities, limitations on our ability to sell our products, obligations to remediate environmental contamination, and criminal and civil liabilities or other sanctions. In addition, changes in environmental regulations (including regulations relating to climate change and greenhouse gas emissions) could require us to invest in potentially costly pollution control equipment, alter our manufacturing processes or use substitute (potentially more expensive and/or rarer) materials. Further, we use hazardous and other regulated materials that subject us to risks of strict liability for damages caused by any release, regardless of fault. We also face increasing complexity in our manufacturing, product design and procurement operations as we adjust to new and prospective requirements relating to the materials composition of our products, including restrictions on lead and other substances and requirements to track the sources of certain metals and other materials. The cost of complying, or of failing to comply, with these and other regulatory restrictions or contractual obligations could adversely affect our operating results, financial condition and ability to conduct our business.
In addition, we may from time to time be involved in legal proceedings or claims regarding employment, immigration, contracts, product performance, product liability, antitrust, environmental regulations, securities, unfair competition and other matters (in addition to proceedings and claims related to intellectual property matters, which are separately discussed elsewhere in this Item 1A). These legal proceedings and claims, regardless of their merit, may be time-consuming and expensive to prosecute or defend, divert management’s attention and resources, and/or inhibit our ability to sell our products. There can be no assurance regarding the outcome of current or future legal proceedings or claims, which could adversely affect our operating results, financial condition and ability to operate our business.
Regulations related to “conflict minerals” may force us to incur additional expenses, may result in damage to our business reputation and may adversely impact our ability to conduct our business.
Under the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010, the SEC adopted requirements for companies that use certain minerals and derivative metals (referred to as “conflict minerals,” regardless of their actual country of origin) in their products. Some of these metals are commonly used in electronic equipment and devices, including our products. These requirements require companies to annually investigate, disclose and report whether or not such metals originated from the Democratic Republic of Congo or adjoining countries. We have an extremely complex supply chain, with numerous suppliers (many of whom are not obligated to investigate their own supply chains) for the components and parts used in each of our products. As a result, we may incur significant costs to comply with the diligence and disclosure requirements, including costs related to determining the source of any of the relevant metals used in our products. In addition, because our supply chain is so complex, we may not be able to sufficiently verify the origin of all the relevant metals used in our products through the due diligence procedures that we implement, which may harm our business reputation. Though we do not anticipate that our customers will need to know our conflict mineral status to satisfy their own SEC reporting obligations (if any), we may also face difficulties in satisfying customers if they nonetheless require that we prove or certify that our products are “conflict free.” Key components and parts that can be shown to be “conflict free” may not be available to us in sufficient quantity, or at all, or may only be available at significantly higher cost to us. If we are not able to meet customer requirements, customers may choose to disqualify us as a supplier. Any of these outcomes could adversely impact our business, financial condition or operating results.
We depend on key personnel to manage our business effectively, and if we are unable to attract, retain and motivate our key employees, our sales and product development could be harmed.
Our employees are vital to our success, and our key management, engineering and other employees are difficult to replace. We generally do not have employment contracts with our key employees. Further, we do not maintain key person life insurance on any of our employees. The expansion of high technology companies worldwide has increased demand and competition for qualified personnel. If we are unable to retain key personnel, or if we are not able to attract, assimilate and retain additional highly qualified employees to meet our needs in the future, our business and operations could be harmed.

29

Table of Contents

We outsource a number of services to third-party service providers, which decreases our control over the performance of these functions. Disruptions or delays at our third-party service providers could adversely impact our operations.
We outsource a number of services, including our transportation, information systems management and logistics management of spare parts and certain accounting and procurement functions, to domestic and overseas third-party service providers. While outsourcing arrangements may lower our cost of operations, they also reduce our direct control over the services rendered. It is uncertain what effect such diminished control will have on the quality or quantity of products delivered or services rendered, on our ability to quickly respond to changing market conditions, or on our ability to ensure compliance with all applicable domestic and foreign laws and regulations. In addition, many of these outsourced service providers, including certain hosted software applications that we use for confidential data storage, employ “cloud computing” technology for such storage (which refers to an information technology hosting and delivery system in which data is not stored within the user’s physical infrastructure but instead is delivered to and consumed by the user as an Internet-based service). These providers’ cloud computing systems may be susceptible to “cyber incidents,” such as intentional cyber attacks aimed at theft of sensitive data or inadvertent cyber-security compromises, which are outside of our control. If we do not effectively develop and manage our outsourcing strategies, if required export and other governmental approvals are not timely obtained, if our third-party service providers do not perform as anticipated or do not adequately protect our data from cyber-related security breaches, or if there are delays or difficulties in enhancing business processes, we may experience operational difficulties (such as limitations on our ability to ship products), increased costs, manufacturing or service interruptions or delays, loss of intellectual property rights or other sensitive data, quality and compliance issues, and challenges in managing our product inventory or recording and reporting financial and management information, any of which could materially and adversely affect our business, financial condition and results of operations.
We are exposed to risks related to cybersecurity threats and cyber incidents.
In the conduct of our business, we collect, use, transmit and store data on information systems. This data includes confidential information, transactional information and intellectual property belonging to us, our customers and our business partners, as well as personally-identifiable information of individuals. We allocate significant resources to network security, data encryption and other measures to protect our information systems and data from unauthorized access or misuse. Despite our ongoing efforts to enhance our network security measures, our information systems are susceptible to computer viruses, cyber-related security breaches and similar disruptions from unauthorized intrusions, tampering, misuse, criminal acts, including phishing, or other events or developments that we may be unable to anticipate or fail to mitigate and are subject to the inherent vulnerabilities of network security measures. We have experienced cyber-related attacks in the past, and may experience cyber-related attacks in the future. Our security measures may also be breached due to employee errors, malfeasance, or otherwise. Third parties may also attempt to influence employees, users, suppliers or customers to disclose sensitive information in order to gain access to our, our customers’ or business partners’ data. Because the techniques used to obtain unauthorized access to the information systems change frequently, and may not be recognized until launched against a target, we may be unable to anticipate these techniques or to implement adequate preventative measures.
Any of such occurrences could result in disruptions to our operations; misappropriation, corruption or theft of confidential information, including intellectual property and other critical data, of KLA-Tencor, our customers and other business partners; misappropriation of funds and company assets; reduced value of our investments in research, development and engineering; litigation with, or payment of damages to, third parties; reputational damage; costs to comply with regulatory inquiries or actions; data privacy issues; costs to rebuild our internal information systems; and increased cybersecurity protection and remediation costs.
We carry insurance that provides some protection against the potential losses arising from a cybersecurity incident but it will not likely cover all such losses, and the losses that it does not cover may be significant.

30

Table of Contents

We rely upon certain critical information systems for our daily business operations. Our inability to use or access our information systems at critical points in time could unfavorably impact our business operations.
Our global operations are dependent upon certain information systems, including telecommunications, the internet, our corporate intranet, network communications, email and various computer hardware and software applications. System failures or malfunctioning, such as difficulties with our customer relationship management (“CRM”) system, could disrupt our operations and our ability to timely and accurately process and report key components of our financial results. Our enterprise resource planning (“ERP”) system is integral to our ability to accurately and efficiently maintain our books and records, record transactions, provide critical information to our management, and prepare our financial statements. Any disruptions or difficulties that may occur in connection with our ERP system or other systems (whether in connection with the regular operation, periodic enhancements, modifications or upgrades of such systems or the integration of our acquired businesses into such systems) could adversely affect our ability to complete important business processes, such as the evaluation of our internal control over financial reporting pursuant to Section 404 of the Sarbanes-Oxley Act of 2002. Any of these events could have an adverse effect on our business, operating results and financial condition.
Acquisitions are an important element of our strategy but, because of the uncertainties involved, we may not find suitable acquisition candidates and we may not be able to successfully integrate and manage acquired businesses. We are also exposed to risks in connection with strategic alliances into which we may enter.
In addition to our efforts to develop new technologies from internal sources, part of our growth strategy is to pursue acquisitions and acquire new technologies from external sources. As part of this effort, we may make acquisitions of, or significant investments in, businesses with complementary products, services and/or technologies. There can be no assurance that we will find suitable acquisition candidates or that acquisitions we complete will be successful. In addition, we may use equity to finance future acquisitions, which would increase our number of shares outstanding and be dilutive to current stockholders.
If we are unable to successfully integrate and manage acquired businesses or if acquired businesses perform poorly, then our business and financial results may suffer. It is possible that the businesses we have acquired, as well as businesses that we may acquire in the future, may perform worse than expected or prove to be more difficult to integrate and manage than anticipated. In addition, we may lose key employees of the acquired companies. As a result, risks associated with acquisition transactions may give rise to a material adverse effect on our business and financial results for a number of reasons, including:
we may have to devote unanticipated financial and management resources to acquired businesses;
the combination of businesses may cause the loss of key personnel or an interruption of, or loss of momentum in, the activities of our company and/or the acquired business;
we may not be able to realize expected operating efficiencies or product integration benefits from our acquisitions;
we may experience challenges in entering into new market segments for which we have not previously manufactured and sold products;
we may face difficulties in coordinating geographically separated organizations, systems and facilities;
the customers, distributors, suppliers, employees and others with whom the companies we acquire have business dealings may have a potentially adverse reaction to the acquisition;
we may have to write-off goodwill or other intangible assets; and
we may incur unforeseen obligations or liabilities in connection with acquisitions.
At times, we may also enter into strategic alliances with customers, suppliers or other business partners with respect to development of technology and intellectual property. These alliances typically require significant investments of capital and exchange of proprietary, highly sensitive information. The success of these alliances depends on various factors over which we may have limited or no control and requires ongoing and effective cooperation with our strategic partners. Mergers and acquisitions and strategic alliances are inherently subject to significant risks, and the inability to effectively manage these risks could materially and adversely affect our business, financial condition and operating results.

31

Table of Contents

Disruption of our manufacturing facilities or other operations, or in the operations of our customers, due to earthquake, flood, other natural catastrophic events, health epidemics or terrorism could result in cancellation of orders, delays in deliveries or other business activities, or loss of customers and could seriously harm our business.
We have significant manufacturing operations in the United States, Singapore, Israel, Germany and China. In addition, our business is international in nature, with our sales, service and administrative personnel and our customers located in numerous countries throughout the world. Operations at our manufacturing facilities and our assembly subcontractors, as well as our other operations and those of our customers, are subject to disruption for a variety of reasons, including work stoppages, acts of war, terrorism, health epidemics, fire, earthquake, volcanic eruptions, energy shortages, flooding or other natural disasters. Such disruption could cause delays in, among other things, shipments of products to our customers, our ability to perform services requested by our customers, or the installation and acceptance of our products at customer sites. We cannot ensure that alternate means of conducting our operations (whether through alternate production capacity or service providers or otherwise) would be available if a major disruption were to occur or that, if such alternate means were available, they could be obtained on favorable terms.
In addition, as part of our cost-cutting actions, we have consolidated several operating facilities. Our California operations are now primarily centralized in our Milpitas facility. The consolidation of our California operations into a single campus could further concentrate the risks related to any of the disruptive events described above, such as acts of war or terrorism, earthquakes, fires or other natural disasters, if any such event were to impact our Milpitas facility.

We are predominantly uninsured for losses and interruptions caused by terrorist acts and acts of war. If international political instability continues or increases, our business and results of operations could be harmed.
The threat of terrorism targeted at, or acts of war in, the regions of the world in which we do business increases the uncertainty in our markets. Any act of terrorism or war that affects the economy or the semiconductor industry could adversely affect our business. Increased international political instability in various parts of the world, disruption in air transportation and further enhanced security measures as a result of terrorist attacks may hinder our ability to do business and may increase our costs of operations. We maintain significant manufacturing and research and development operations in Israel, an area that has historically experienced a high degree of political instability, and we are therefore exposed to risks associated with future instability in that region. Such instability could directly impact our ability to operate our business (or our customers’ ability to operate their businesses) in the affected region, cause us to incur increased costs in transportation, make such transportation unreliable, increase our insurance costs, and cause international currency markets to fluctuate. Such instability could also have the same effects on our suppliers and their ability to timely deliver their products. If international political instability continues or increases in any region in which we do business, our business and results of operations could be harmed. We are predominantly uninsured for losses and interruptions caused by terrorist acts and acts of war.
We self-insure certain risks including earthquake risk. If one or more of the uninsured events occurs, we could suffer major financial loss.
We purchase insurance to help mitigate the economic impact of certain insurable risks; however, certain risks are uninsurable, are insurable only at significant cost or cannot be mitigated with insurance. Accordingly, we may experience a loss that is not covered by insurance, either because we do not carry applicable insurance or because the loss exceeds the applicable policy amount or is less than the deductible amount of the applicable policy. For example, we do not currently hold earthquake insurance. An earthquake could significantly disrupt our manufacturing operations, a significant portion of which are conducted in California, an area highly susceptible to earthquakes. It could also significantly delay our research and engineering efforts on new products, much of which is also conducted in California. We take steps to minimize the damage that would be caused by an earthquake, but there is no certainty that our efforts will prove successful in the event of an earthquake. We self-insure earthquake risks because we believe this is a prudent financial decision based on our large cash reserves and the high cost and limited coverage available in the earthquake insurance market. Certain other risks are also self-insured either based on a similar cost-benefit analysis, or based on the unavailability of insurance. If one or more of the uninsured events occurs, we could suffer major financial loss.

32

Table of Contents

We are exposed to foreign currency exchange rate fluctuations. Although we hedge certain currency risks, we may still be adversely affected by changes in foreign currency exchange rates or declining economic conditions in these countries.
We have some exposure to fluctuations in foreign currency exchange rates, primarily the Japanese Yen and the euro. We have international subsidiaries that operate and sell our products globally. In addition, an increasing proportion of our manufacturing activities are conducted outside of the United States, and many of the costs associated with such activities are denominated in foreign currencies. We routinely hedge our exposures to certain foreign currencies with certain financial institutions in an effort to minimize the impact of certain currency exchange rate fluctuations, but these hedges may be inadequate to protect us from currency exchange rate fluctuations. To the extent that these hedges are inadequate, or if there are significant currency exchange rate fluctuations in currencies for which we do not have hedges in place, our reported financial results or the way we conduct our business could be adversely affected. Furthermore, if a financial counterparty to our hedges experiences financial difficulties or is otherwise unable to honor the terms of the foreign currency hedge, we may experience material financial losses.
We are exposed to fluctuations in interest rates and the market values of our portfolio investments; impairment of our investments could harm our earnings. In addition, we and our stockholders are exposed to risks related to the volatility of the market for our common stock.
Our investment portfolio primarily consists of both corporate and government debt securities that are susceptible to changes in market interest rates and bond yields. As market interest rates and bond yields increase, those securities with a lower yield-at-cost show a mark-to-market unrealized loss. We believe we have the ability to realize the full value of all these investments upon maturity. However, an impairment of the fair market value of our investments, even if unrealized, must be reflected in our financial statements for the applicable period and may therefore have a material adverse effect on our results of operations for that period.
In addition, the market price for our common stock is volatile and has fluctuated significantly during recent years. The trading price of our common stock could continue to be highly volatile and fluctuate widely in response to various factors, including without limitation conditions in the semiconductor industry and other industries in which we operate, fluctuations in the global economy or capital markets, our operating results or other performance metrics, or adverse consequences experienced by us as a result of any of the risks described elsewhere in this Item 1A. Volatility in the market price of our common stock could cause an investor in our common stock to experience a loss on the value of their investment in us and could also adversely impact our ability to raise capital through the sale of our common stock or to use our common stock as consideration to acquire other companies.
We are exposed to risks in connection with tax and regulatory compliance audits in various jurisdictions.
We are subject to tax and regulatory compliance audits (such as related to customs or product safety requirements) in various jurisdictions, and such jurisdictions may assess additional income or other taxes, penalties, fines or other prohibitions against us. Although we believe our tax estimates are reasonable and that our products and practices comply with applicable regulations, the final determination of any such audit and any related litigation could be materially different from our historical income tax provisions and accruals related to income taxes and other contingencies. The results of an audit or litigation could have a material adverse effect on our operating results or cash flows in the period or periods for which that determination is made.
A change in our effective tax rate can have a significant adverse impact on our business.
We earn profits in, and are therefore potentially subject to taxes in, the U.S. and numerous foreign jurisdictions, including Singapore, Israel and the Cayman Islands, the countries in which we earn the majority of our non-U.S. profits. Due to economic, political or other conditions, tax rates in those jurisdictions may be subject to significant change. A number of factors may adversely impact our future effective tax rates, such as the jurisdictions in which our profits are determined to be earned and taxed; changes in the tax rates imposed by those jurisdictions; the resolution of issues arising from tax audits with various tax authorities; changes in the valuation of our deferred tax assets and liabilities; adjustments to estimated taxes upon finalization of various tax returns; increases in expenses not deductible for tax purposes, including write-offs of acquired in-process research and development and impairment of goodwill in connection with acquisitions; changes in available tax credits; changes in stock-based compensation expense; changes in tax laws or the interpretation of such tax laws (for example, proposals for fundamental United States international tax reform); changes in generally accepted accounting principles; and the repatriation of earnings from outside the United States for which we have not previously provided for United States taxes. A change in our effective tax rate can materially and adversely impact our results from operations.

33

Table of Contents

Compliance with federal securities laws, rules and regulations, as well as NASDAQ requirements, is becoming increasingly complex, and the significant attention and expense we must devote to those areas may have an adverse impact on our business.
Federal securities laws, rules and regulations, as well as NASDAQ rules and regulations, require companies to maintain extensive corporate governance measures, impose comprehensive reporting and disclosure requirements, set strict independence and financial expertise standards for audit and other committee members and impose civil and criminal penalties for companies and their chief executive officers, chief financial officers and directors for securities law violations. These laws, rules and regulations have increased, and in the future are expected to continue to increase, the scope, complexity and cost of our corporate governance, reporting and disclosure practices, which could harm our results of operations and divert management’s attention from business operations.
A change in accounting standards or practices or a change in existing taxation rules or practices (or changes in interpretations of such standards, practices or rules) can have a significant effect on our reported results and may even affect reporting of transactions completed before the change is effective.
New accounting pronouncements and taxation rules and varying interpretations of accounting pronouncements and taxation rules have occurred and will continue to occur in the future. Changes to (or revised interpretations or applications of) existing tax or accounting rules or the questioning of current or past practices may adversely affect our reported financial results or the way we conduct our business.
ITEM 1B.
UNRESOLVED STAFF COMMENTS

None.

34

Table of Contents

ITEM 2.
PROPERTIES
Information regarding our principal properties as of June 30, 2016 is set forth below:
Location
 
Type
 
Principal Use
 
Square
Footage
 
Ownership
Milpitas, CA
 
Office, plant and
warehouse
 
Principal Executive Offices, Research, Engineering, Marketing, Manufacturing, Service and Sales Administration
 
727,302
 
Owned
 
 
 
 
 
 
 
 
 
Westwood, MA(1)
 
Office and plant
 
Engineering, Marketing, Manufacturing and Service
 
116,908
 
Leased
 
 
 
 
 
 
 
 
 
Leuven, Belgium(1)
 
Office, plant and
warehouse
 
Engineering, Marketing and Service and Sales Administration
 
60,619
 
Owned
 
 
 
 
 
 
 
 
 
Shenzhen, China
 
Office and plant
 
Sales, Service and Manufacturing
 
47,213
 
Leased
 
 
 
 
 
 
 
 
 
Shanghai, China
 
Office
 
Research, Service and Sales Administration
 
41,184
 
Leased
 
 
 
 
 
 
 
 
 
Weilburg, Germany
 
Office and plant
 
Engineering, Marketing, Manufacturing, Service and Sales Administration
 
138,119
 
Leased
 
 
 
 
 
 
 
 
 
Chennai, India
 
Office
 
Engineering
 
33,366
 
Owned
 
 
 
 
 
 
 
 
 
Migdal Ha’Emek, Israel
 
Office and plant
 
Research, Engineering, Marketing, Manufacturing, Service and Sales Administration
 
191,982
 
Owned
 
 
 
 
 
 
 
 
 
Yokohama, Japan
 
Office and
warehouse
 
Sales and Service
 
35,531
 
Leased
 
 
 
 
 
 
 
 
 
Serangoon, Singapore(2)
 
Office and plant
 
Sales, Service and Manufacturing
 
248,155
 
Owned
 
 
 
 
 
 
 
 
 
Hsinchu, Taiwan
 
Office
 
Sales and Service
 
73,676
 
Leased
__________________   
(1)
Portions of this property are sublet, are vacant and marketed to sublease, or are leased to third parties.
(2)
We own the building at our location in Serangoon, Singapore, but the land on which this building resides is leased.
As of June 30, 2016, we owned or leased a total of approximately 2.0 million square feet of space worldwide, including the locations listed above and office space for smaller sales and service offices in several locations throughout the world. Our operating leases expire at various times through December 31, 2021, subject to renewal, with some of the leases containing renewal option clauses at the fair market value, for additional periods up to five years. Additional information regarding these leases is incorporated herein by reference to Note 12, “Commitments and Contingencies” to the consolidated financial statements. We believe our properties are adequately maintained and suitable for their intended use and that our production facilities have capacity adequate for our current needs.
ITEM 3.
LEGAL PROCEEDINGS
The information set forth below under Note 13, “Litigation and Other Legal Matters” to the consolidated financial statements is incorporated herein by reference.
ITEM 4.
MINE SAFETY DISCLOSURES
Not applicable.

35

Table of Contents

PART II

ITEM 5.
MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES
Our common stock is listed and traded on the NASDAQ Global Select Market under the symbol “KLAC.”
The prices per share reflected in the following table represent the high and low prices for our common stock on the NASDAQ Global Select Market for the periods indicated:
 
Year ended June 30, 2016
 
Year ended June 30, 2015
 
 
High    
 
Low    
 
Cash Dividends Declared per share
 
High    
 
Low    
 
Cash Dividends Declared per share
 
First Fiscal Quarter
$
57.35

 
$
44.95

 
$
0.52

 
$
81.27

 
$
70.10

 
$
0.50

 
Second Fiscal Quarter
$
70.28

 
$
48.73

 
$
0.52

 
$
84.21

 
$
65.25

 
$
17.00

*
Third Fiscal Quarter
$
73.19

 
$
62.33

 
$
0.52

 
$
71.26

 
$
57.49

 
$
0.50

 
Fourth Fiscal Quarter
$
75.17

 
$
67.32

 
$
0.52

 
$
60.80

 
$
55.24

 
$
0.50

 
__________________
* Includes a special cash dividend of $16.50 per share that was declared by our Board of Directors on November 19, 2014 and was paid on December 9, 2014 to the stockholders of record as of the close of business on December 1, 2014 during the second quarter of the fiscal year ended June 30, 2015. Additional information regarding special cash dividend can be found in Note 7, “Equity and Long-term Incentive Compensation Plans.”
As of July 15, 2016, there were 312 holders of record of our common stock.
Equity Repurchase Plans
Our Board of Directors has authorized a program for us to repurchase shares of our common stock under which an aggregate of approximately 5.9 million shares were available for repurchase as of June 30, 2016. In connection with entering into the Merger Agreement, we suspended further repurchases under our repurchase program effective October 21, 2015. We did not repurchase any shares during the three months ended June 30, 2016 and repurchased 3.4 million shares ($175.7 million) in the year ended June 30, 2016.



36

Table of Contents

Stock Performance Graph and Cumulative Total Return
Notwithstanding any statement to the contrary in any of our previous or future filings with the Securities and Exchange Commission, the following information relating to the price performance of our common stock shall not be deemed “filed” with the Commission or “soliciting material” under the Securities Exchange Act of 1934 and shall not be incorporated by reference into any such filings.
The following graph compares the cumulative 5-year total return attained by stockholders on our common stock relative to the cumulative total returns of the S&P 500 Index (as required by SEC regulations) and the Philadelphia Semiconductor Index (PHLX). The graph tracks the performance of a $100 investment in our common stock and in each of the indices (with the reinvestment of all dividends) from June 30, 2011 to June 30, 2016.
 
June 2011
 
June 2012
 
June 2013
 
June 2014
 
June 2015
 
June 2016
KLA-Tencor Corporation
$100.00
 
$125.52
 
$146.51
 
$196.57
 
$195.01
 
$262.83
S&P 500
$100.00
 
$105.45
 
$127.17
 
$158.46
 
$170.22
 
$177.02
PHLX Semiconductor
$100.00
 
$104.43
 
$123.18
 
$166.91
 
$174.92
 
$184.43
__________________ 
 * Assumes $100 invested on June 30, 2011 in stock or index, including reinvestment of dividends.
Our fiscal year ends June 30. The comparisons in the graph above are based upon historical data and are not necessarily indicative of, nor intended to forecast, future stock price performance.

37

Table of Contents

ITEM 6.
SELECTED FINANCIAL DATA
The following tables include selected consolidated summary financial data for each of our last five fiscal years. This data should be read in conjunction with Item 8, “Financial Statements and Supplementary Data,” and Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in this Annual Report on Form 10-K. 
 
Year ended June 30,
(In thousands, except per share amounts)
2016
 
2015
 
2014
 
2013
 
2012
Consolidated Statements of Operations:
 
 
 
 
 
 
 
 
 
Total revenues
$
2,984,493

 
$
2,814,049

 
$
2,929,408

 
$
2,842,781

 
$
3,171,944

Net income(1)
$
704,422

 
$
366,158

 
$
582,755

 
$
543,149

 
$
756,015

Cash dividends declared per share (including a special cash dividend of $16.50 per share declared during the three months ended December 31, 2014)
$
2.08

 
$
18.50

 
$
1.80

 
$
1.60

 
$
1.40

Net income per share:
 
 
 
 
 
 
 
 
 
Basic
$
4.52

 
$
2.26

 
$
3.51

 
$
3.27

 
$
4.53

Diluted
$
4.49

 
$
2.24

 
$
3.47

 
$
3.21

 
$
4.44

 
 
 
 
 
 
 
 
 
 
 
As of June 30,
 
2016
 
2015
 
2014
 
2013
 
2012
Consolidated Balance Sheets:
 
 
 
 
 
 
 
 
 
Cash, cash equivalents and marketable securities
$
2,491,294

 
$
2,387,111

 
$
3,152,637

 
$
2,918,881

 
$
2,534,444

Working capital(2)
$
2,865,609

 
$
2,902,813

 
$
3,690,484

 
$
3,489,236

 
$
3,300,401

Total assets
$
4,962,432

 
$
4,826,012

 
$
5,535,846

 
$
5,283,804

 
$
5,096,020

Long-term debt(3)
$
3,057,936

 
$
3,173,435

 
$
745,101

 
$
743,823

 
$
742,545

Total stockholders’ equity(3)
$
689,114

 
$
421,439

 
$
3,669,346

 
$
3,482,152

 
$
3,315,595

__________
(1)
Our net income decreased to $366.2 million in the fiscal year ended June 30, 2015, primarily as a result of the impact of the pre-tax net loss of $131.7 million for the loss on extinguishment of debt and certain one-time expenses of $2.5 million associated with the leveraged recapitalization that was completed during the three months ended December 31, 2014.
(2)
We early adopted the accounting standards update regarding classification of deferred taxes at the beginning of the fourth quarter of fiscal year ended 2016. Upon adoption, approximately $218 million in net current deferred tax assets were reclassified to noncurrent. No prior periods were retrospectively adjusted. Refer to Note 1, “Description of Business and Summary of Significant Accounting Policies” for additional details.
(3)
Our long-term debt increased to $3.17 billion at the end of fiscal year ended June 30, 2015, because, as part of the leveraged recapitalization plan, we issued $2.50 billion aggregate principal amount of senior, unsecured long-term notes (collectively referred to as “Senior Notes”), entered into $750.0 million of five-year senior unsecured prepayable term loans and a $500 million unfunded revolving credit facility and redeemed our $750.0 million aggregate principal amount of 6.900% Senior Notes due in 2018 (the “2018 Notes”). Refer to Note 6, “Debt” for additional details. Our total stockholders’ equity decreased to $421.4 million at the end of fiscal year ended June 30, 2015, because, as part of our leveraged recapitalization plan, we declared a special cash dividend of approximately $2.76 billion. Refer to Note 7, “Equity and Long-term Incentive Compensation Plans” for additional details.


38

Table of Contents

ITEM 7.
MANAGEMENTS DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
The following discussion of our financial condition and results of operations should be read in conjunction with our Consolidated Financial Statements and the related notes included in Item 8, “Financial Statements and Supplementary Data,” in this Annual Report on Form 10-K. This discussion contains forward-looking statements, which involve risks and uncertainties. Our actual results could differ materially from those anticipated in the forward-looking statements as a result of certain factors, including but not limited to those discussed in Item 1A, “Risk Factors” and elsewhere in this Annual Report on Form 10-K. (See “Special Note Regarding Forward-Looking Statements.”)
CRITICAL ACCOUNTING ESTIMATES AND POLICIES
The preparation of our consolidated financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions in applying our accounting policies that affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosure of contingent assets and liabilities. We base these estimates and assumptions on historical experience, and evaluate them on an on-going basis to ensure that they remain reasonable under current conditions. Actual results could differ from those estimates. We discuss the development and selection of the critical accounting estimates with the Audit Committee of our Board of Directors on a quarterly basis, and the Audit Committee has reviewed our related disclosure in this Annual Report on Form 10-K. The accounting policies that reflect our more significant estimates, judgments and assumptions and which we believe are the most critical to aid in fully understanding and evaluating our reported financial results include the following:
Revenue Recognition. We recognize revenue when persuasive evidence of an arrangement exists, delivery has occurred or services have been rendered, the selling price is fixed or determinable, and collectibility is reasonably assured. We derive revenue from three sources—sales of systems, spare parts and services. In general, we recognize revenue for systems when the system has been installed, is operating according to predetermined specifications and is accepted by the customer. When we have demonstrated a history of successful installation and acceptance, we recognize revenue upon delivery and customer acceptance. Under certain circumstances, however, we recognize revenue prior to acceptance from the customer, as follows:
When the customer fab has previously accepted the same tool, with the same specifications, and when we can objectively demonstrate that the tool meets all of the required acceptance criteria.
When system sales to independent distributors have no installation requirement, contain no acceptance agreement, and 100% of the payment is due based upon shipment.
When the installation of the system is deemed perfunctory.
When the customer withholds acceptance due to issues unrelated to product performance, in which case revenue is recognized when the system is performing as intended and meets predetermined specifications.
In circumstances in which we recognize revenue prior to installation, the portion of revenue associated with installation is deferred based on estimated fair value, and that revenue is recognized upon completion of the installation.
In many instances, products are sold in stand-alone arrangements. Services are sold separately through renewals of annual maintenance contracts. We have multiple element revenue arrangements in cases where certain elements of a sales arrangement are not delivered and accepted in one reporting period. To determine the relative fair value of each element in a revenue arrangement, we allocate arrangement consideration based on the selling price hierarchy. For substantially all of the arrangements with multiple deliverables pertaining to products and services, we use vendor-specific objective evidence (“VSOE”) or third-party evidence (“TPE”) to allocate the selling price to each deliverable. We determine TPE based on historical prices charged for products and services when sold on a stand-alone basis. When we are unable to establish relative selling price using VSOE or TPE, we use estimated selling price (“ESP”) in our allocation of arrangement consideration. The objective of ESP is to determine the price at which we would transact a sale if the product or service were sold on a stand-alone basis. ESP could potentially be used for new or customized products. We regularly review relative selling prices and maintain internal controls over the establishment and updates of these estimates.
In a multiple element revenue arrangement, we defer revenue recognition associated with the relative fair value of each undelivered element until that element is delivered to the customer. To be considered a separate element, the product or service in question must represent a separate unit of accounting, which means that such product or service must fulfill the following criteria: (a) the delivered item(s) has value to the customer on a stand-alone basis; and (b) if the arrangement includes a general right of return relative to the delivered item(s), delivery or performance of the undelivered item(s) is considered probable and substantially in our control. If the arrangement does not meet all the above criteria, the entire amount of the sales contract is deferred until all elements are accepted by the customer.

39

Table of Contents

Trade-in rights are occasionally granted to customers to trade in tools in connection with subsequent purchases. We estimate the value of the trade-in right and reduce the revenue recognized on the initial sale. This amount is recognized at the earlier of the exercise of the trade-in right or the expiration of the trade-in right.
Spare parts revenue is recognized when the product has been shipped, risk of loss has passed to the customer and collection of the resulting receivable is probable.
Service and maintenance contract revenue is recognized ratably over the term of the maintenance contract. Revenue from services performed in the absence of a maintenance contract, including consulting and training revenue, is recognized when the related services are performed and collectibility is reasonably assured.
We sell stand-alone software that is subject to software revenue recognition guidance. We periodically review selling prices to determine whether VSOE exists, and in situations where we are unable to establish VSOE for undelivered elements such as post-contract service, revenue is recognized ratably over the term of the service contract.
We also defer the fair value of non-standard warranty bundled with equipment sales as unearned revenue. Non-standard warranty includes services incremental to the standard 40-hour per week coverage for 12 months. Non-standard warranty is recognized ratably as revenue when the applicable warranty term period commences.
The deferred system profit balance equals the amount of deferred system revenue that was invoiced and due on shipment, less applicable product and warranty costs. Deferred system revenue represents the value of products that have been shipped and billed to customers which have not met our revenue recognition criteria. Deferred system profit does not include the profit associated with product shipments to certain customers in Japan, to whom title does not transfer until customer acceptance. Shipments to such customers in Japan are classified as inventory at cost until the time of acceptance.
We enter into sales arrangements that may consist of multiple deliverables of our products and services where certain elements of the sales arrangement are not delivered and accepted in one reporting period. Judgment is required to properly identify the accounting units of the multiple deliverable transactions and to determine the manner in which revenue should be allocated among the accounting units. Additionally, judgment is required to interpret various commercial terms and determine when all criteria of revenue recognition have been met in order for revenue recognition to occur in the appropriate accounting period. While changes in the allocation of the estimated selling price between the accounting units will not affect the amount of total revenue recognized for a particular arrangement, any material changes in these allocations could impact the timing of revenue recognition, which could have a material effect on our financial position and results of operations.
Inventories. Inventories are stated at the lower of cost (on a first-in, first-out basis) or market. Demonstration units are stated at their manufacturing cost and written down to their net realizable value. Our manufacturing overhead standards for product costs are calculated assuming full absorption of forecasted spending over projected volumes, adjusted for excess capacity. Abnormal inventory costs such as costs of idle facilities, excess freight and handling costs, and spoilage are recognized as current period charges. We write down product inventory based on forecasted demand and technological obsolescence and service spare parts inventory based on forecasted usage. These factors are impacted by market and economic conditions, technology changes, new product introductions and changes in strategic direction and require estimates that may include uncertain elements. Actual demand may differ from forecasted demand, and such differences may have a material effect on recorded inventory values.
Warranty. We provide standard warranty coverage on our systems for 40 hours per week for 12 months, providing labor and parts necessary to repair the systems during the warranty period. We account for the estimated warranty cost as a charge to costs of revenues when revenue is recognized. The estimated warranty cost is based on historical product performance and field expenses. Utilizing actual service records, we calculate the average service hours and parts expense per system and apply the actual labor and overhead rates to determine the estimated warranty charge. We update these estimated charges on a regular basis. The actual product performance and/or field expense profiles may differ, and in those cases we adjust our warranty accruals accordingly. See Note 12, “Commitments and Contingencies” to the Consolidated Financial Statements for additional details.

40

Table of Contents

Allowance for Doubtful Accounts. A majority of our trade receivables are derived from sales to large multinational semiconductor manufacturers throughout the world. In order to monitor potential credit losses, we perform ongoing credit evaluations of our customers’ financial condition. An allowance for doubtful accounts is maintained for probable credit losses based upon our assessment of the expected collectibility of the accounts receivable. The allowance for doubtful accounts is reviewed on a quarterly basis to assess the adequacy of the allowance. We take into consideration (1) any circumstances of which we are aware of a customer’s inability to meet its financial obligations; and (2) our judgments as to prevailing economic conditions in the industry and their impact on our customers. If circumstances change, such that the financial conditions of our customers are adversely affected and they are unable to meet their financial obligations to us, we may need to record additional allowances, which would result in a reduction of our net income.
Accounting for Stock-Based Compensation Plans. We account for stock-based awards granted to employees for services based on the fair value of those awards. The fair value of stock-based awards is measured at the grant date and is recognized as expense over the employee’s requisite service period. The fair value for restricted stock units granted without “dividend equivalent” rights is determined using the closing price of our common stock on the grant date for restricted stock units, adjusted to exclude the present value of dividends which are not accrued on the restricted stock units. The fair value for restricted stock units granted with “dividend equivalent” rights is determined using the closing price of our common stock on the grant date. The award holder is not entitled to receive payments under dividend equivalent rights unless the associated restricted stock unit award vests (i.e., the award holder is entitled to receive credits, payable in cash or shares of our common stock, equal to the cash dividends that would have been received on the shares of our common stock underlying the restricted stock units had the shares been issued and outstanding on the dividend record date, but such dividend equivalents are only paid subject to the recipient satisfying the vesting requirements of the underlying award). The fair value is determined using a Black-Scholes valuation model for purchase rights under our Employee Stock Purchase Plan. The Black-Scholes option-pricing model requires the input of assumptions, including the option’s expected term and the expected price volatility of the underlying stock. The expected stock price volatility assumption is based on the market-based historical implied volatility from traded options of our common stock. We have elected not to include the indirect tax effects of stock-based compensation deductions when calculating the windfall benefits and therefore recognize the full effect of these deductions in the income statement in the period in which the taxable event occurs.
Accounting for Cash-Based Long-Term Incentive Compensation. Cash-based long-term incentive (“Cash LTI”) awards issued to employees under our Cash LTI program vest in four equal installments, with 25% of the aggregate amount of the Cash LTI award vesting on each yearly anniversary of the grant date over a four-year period. In order to receive payments under a Cash LTI award, participants must remain employed by us as of the applicable award vesting date. Compensation expense related to the Cash LTI awards is recognized over the vesting term, which is adjusted for the impact of estimated forfeitures.
Contingencies and Litigation. We are subject to the possibility of losses from various contingencies. Considerable judgment is necessary to estimate the probability and amount of any loss from such contingencies. An accrual is made when it is probable that a liability has been incurred or an asset has been impaired and the amount of loss can be reasonably estimated. We accrue a liability and recognize as expense the estimated costs expected to be incurred over the next twelve months to defend or settle asserted and unasserted claims existing as of the balance sheet date. See Note 12, “Commitments and Contingencies” and Note 13, “Litigation and Other Legal Matters” to the Consolidated Financial Statements for additional details.
Goodwill and Intangible Assets. We assess goodwill for impairment annually as well as whenever events or changes in circumstances indicate that the carrying value may not be recoverable. Long-lived intangible assets are tested for impairment whenever events or changes in circumstances indicate that their carrying amounts may not be recoverable. See Note 5, “Goodwill and Purchased Intangible Assets” to the Consolidated Financial Statements for additional details. Goodwill represents the excess of the purchase price over the fair value of the net tangible and identifiable intangible assets acquired in each business combination. We performed our annual qualitative assessment of the goodwill by reporting unit in our second quarter of fiscal year ended June 30, 2016 and concluded that there was no impairment. There have been no significant events or circumstances affecting the valuation of goodwill subsequent to our annual impairment test. The next annual evaluation of the goodwill by reporting unit will be performed in the second quarter of the fiscal year ending June 30, 2017.
If we were to encounter challenging economic conditions, such as a decline in our operating results, an unfavorable industry or macroeconomic environment, a substantial decline in our stock price, or any other adverse change in market conditions, we may be required to perform the two-step quantitative goodwill impairment analysis. In addition, if such conditions have the effect of changing one of the critical assumptions or estimates we use to calculate the value of our goodwill or intangible assets, we may be required to record goodwill and/or intangible asset impairment charges in future periods. It is not possible at this time to determine if any such future impairment charge would occur or, if it does, whether such charge would be material to our results of operations.

41

Table of Contents

Income Taxes. We account for income taxes in accordance with the authoritative guidance, which requires that deferred tax assets and liabilities be recognized using enacted tax rates for the effect of temporary differences between the book and tax bases of recorded assets and liabilities. The guidance also requires that deferred tax assets be reduced by a valuation allowance if it is more likely than not that a portion of the deferred tax asset will not be realized. We have determined that a valuation allowance is necessary against a portion of the deferred tax assets, but we anticipate that our future taxable income will be sufficient to recover the remainder of our deferred tax assets. However, should there be a change in our ability to recover our deferred tax assets that are not subject to a valuation allowance, we could be required to record an additional valuation allowance against such deferred tax assets. This would result in an increase to our tax provision in the period in which we determine that the recovery is not probable.
On a quarterly basis, we provide for income taxes based upon an estimated annual effective income tax rate. The effective tax rate is highly dependent upon the geographic composition of worldwide earnings, tax regulations governing each region, availability of tax credits and the effectiveness of our tax planning strategies. We carefully monitor the changes in many factors and adjust our effective income tax rate on a timely basis. If actual results differ from these estimates, this could have a material effect on our financial condition and results of operations.
In addition, the calculation of our tax liabilities involves dealing with uncertainties in the application of complex tax regulations. In accordance with the authoritative guidance on accounting for uncertainty in income taxes, we recognize liabilities for uncertain tax positions based on the two-step process. The first step is to evaluate the tax position for recognition by determining if the weight of available evidence indicates that it is more likely than not that the position will be sustained in audit, including resolution of related appeals or litigation processes, if any. The second step is to measure the tax benefit as the largest amount that is more than 50% likely of being realized upon ultimate settlement. We reevaluate these uncertain tax positions on a quarterly basis. This evaluation is based on factors including, but not limited to, changes in facts or circumstances, changes in tax law, effectively settled issues under audit and new audit activity. Any change in these factors could result in the recognition of a tax benefit or an additional charge to the tax provision.
Valuation of Marketable Securities. Our investments in available-for-sale securities are reported at fair value. Unrealized gains related to increases in the fair value of investments and unrealized losses related to decreases in the fair value are included in accumulated other comprehensive income (loss), net of tax, as reported on our Consolidated Statements of Stockholders’ Equity. However, changes in the fair value of investments impact our net income only when such investments are sold or an impairment charge is recognized. Realized gains and losses on the sale of securities are determined by specific identification of the security’s cost basis. We periodically review our investment portfolio to determine if any investment is other-than-temporarily impaired due to changes in credit risk or other potential valuation concerns, which would require us to record an impairment charge in the period during which any such determination is made. In making this judgment, we evaluate, among other things, the duration of the investment, the extent to which the fair value of an investment is less than its cost, the credit rating and any changes in credit rating for the investment, default and loss rates of the underlying collateral, structure and credit enhancements to determine if a credit loss may exist. Our assessment that an investment is not other-than-temporarily impaired could change in the future due to new developments or changes in our strategies or assumptions related to any particular investment.
Effects of Recent Accounting Pronouncements
Recently Adopted
In November 2015, the Financial Accounting Standards board (“FASB”) issued an accounting standard update for the presentation of deferred income taxes. Under this new guidance, deferred tax assets and liabilities should be classified as noncurrent in a classified balance sheet. We early adopted this accounting standard update on a prospective basis at the beginning of the fourth quarter of fiscal year ended 2016. Upon adoption, approximately $218 million in net current deferred tax assets were reclassified to noncurrent. No prior periods were retrospectively adjusted.

42

Table of Contents

Updates Not Yet Effective
In May 2014, the FASB issued an accounting standard update regarding revenue from customer contracts to transfer goods and services or non-financial assets unless the contracts are covered by other standards (for example, insurance or lease contracts). Under the new guidance, an entity should recognize revenue in connection with the transfer of promised goods or services to customers in an amount that reflects the consideration that the entity expects to be entitled to receive in exchange for those goods or services. In addition, the new standard requires that reporting companies disclose the nature, amount, timing, and uncertainty of revenue and cash flows arising from contracts with customers. In August 2015, the FASB issued an amendment to defer the effective date of the update by one year, with early adoption on the original effective date permitted. With this amendment, the updates are effective for us beginning in the first quarter of our fiscal year ending June 30, 2019, with early adoption permitted beginning in the first quarter of our fiscal year ending June 30, 2018. Subsequent to this amendment, the FASB has issued additional clarifying implementation guidance. The new revenue standard may be applied retrospectively to each prior period presented or retrospectively with the cumulative effect recognized as of the date of adoption. We are currently evaluating the impact of this accounting standard update on our consolidated financial statements.
In April 2015, the FASB issued an accounting standard update for customer’s cloud based fees. The guidance changes what a customer must consider in determining whether a cloud computing arrangement contains a software license. If the arrangement contains a software license, the customer would account for the fees related to the software license element in accordance with guidance related to internal use software; if the arrangement does not contain a software license, the customer would account for the arrangement as a service contract. The update is effective for us beginning in the first quarter of our fiscal year ending June 30, 2017. Early adoption is permitted as of the beginning of an interim or annual period. We are currently evaluating the impact of this accounting standard update on our consolidated financial statements.
In July 2015, the FASB issued an accounting standard update for the subsequent measurement of inventory. The amended guidance requires entities to measure inventory at the lower of cost or net realizable value. Net realizable value is the estimated selling prices in the ordinary course of business, less reasonably predictable costs of completion, disposal and transportation. The requirement would replace the current lower of cost or market evaluation and the accounting guidance is unchanged for inventory measured using last-in, first-out (“LIFO”) or the retail inventory method. The update is effective for us beginning in the first quarter of our fiscal year ending June 30, 2018 and should be applied prospectively with early adoption permitted as of the beginning of an interim or annual reporting period. We are currently evaluating the impact of this accounting standard update on our consolidated financial statements.
In January 2016, the FASB issued an accounting standard update that changes the accounting for financial instruments primarily related to equity investments (other than those accounted for under the equity method of accounting or those that result in consolidation of the investee), financial liabilities under the fair value option, and the presentation and disclosure requirements for financial instruments. The accounting standard update is effective for us beginning in the first quarter of our fiscal year ending 2019, and early adoption is permitted. We are currently evaluating the impact of this accounting standard update on our consolidated financial statements.
In February 2016, the FASB issued an accounting standard update which amends the existing accounting standards for leases. Consistent with current guidance, the recognition, measurement, and presentation of expenses and cash flows arising from a lease by a lessee primarily will depend on its classification. Under the new guidance, a lessee will be required to recognize assets and liabilities for all leases with lease terms of more than 12 months. The update is effective for us beginning in the first quarter of our fiscal year ending June 30, 2020 using a modified retrospective transition method. Early adoption is permitted. We are currently evaluating the impact of this accounting standard update on our consolidated financial statements.
In March 2016, the FASB issued an accounting standard update to simplify certain aspects of share-based payment awards to employees, including the accounting for income taxes, an option to recognize gross stock-based compensation expense with actual forfeitures recognized as they occur and statutory tax withholding requirements, as well as certain classifications in the statement of cash flows. The update is effective for us beginning in the first quarter of our fiscal year ending June 30, 2018, with early adoption permitted and all of the guidance must be adopted in the same period. We are currently evaluating the impact of this accounting standard update on our consolidated financial statements.
In June 2016, the FASB issued an accounting standard update that changes the accounting for recognizing impairments of financial assets. Under the update, credit losses for certain types of financial instruments will be estimated based on expected losses. The update also modifies the impairment models for available-for-sale debt securities and for purchased financial assets with credit deterioration since their origination. The update is effective for us beginning in the first quarter of our fiscal year ending June 30, 2021, with early adoption permitted starting in the first quarter of fiscal year ending 2020. We are currently evaluating the impact of this accounting standard update on our consolidated financial statements.

43

Table of Contents

EXECUTIVE SUMMARY
KLA-Tencor Corporation is a leading supplier of process control and yield management solutions for the semiconductor and related nanoelectronics industries. Our broad portfolio of inspection and metrology products, and related service, software and other offerings primarily supports integrated circuit (“IC” or “chip”) manufacturers throughout the entire semiconductor fabrication process, from research and development to final volume production. We provide leading-edge equipment, software and support that enable IC manufacturers to identify, resolve and manage significant advanced technology manufacturing process challenges and obtain higher finished product yields at lower overall cost. In addition to serving the semiconductor industry, we also provide a range of technology solutions to a number of other high technology industries, including the LED and data storage industries, as well as general materials research.
Our products and services are used by the vast majority of bare wafer, IC, lithography reticle (“reticle” or “mask”) and disk manufacturers around the world. Our products, services and expertise are used by our customers to measure, detect, analyze and resolve critical product defects that arise in that environment in order to control nanometric level manufacturing processes. Our revenues are driven largely by our customers’ spending on capital equipment and related maintenance services necessary to support key transitions in their underlying product technologies, or to increase their production volumes in response to market demand. Our semiconductor customers generally operate in one or more of the three major semiconductor markets - memory, foundry and logic. All three of these markets are characterized by rapid technological changes and sudden shifts in end-user demand, which influence the level and pattern of our customers’ spending on our products and services. Although capital spending in all three semiconductor markets has historically been very cyclical, the demand for more advanced and lower cost chips used in a growing number of consumer electronics, communications, data processing, and industrial and automotive products has resulted over the long term in a favorable demand environment for our process control and yield management solutions, particularly in the foundry and logic markets, which have higher levels of process control adoption than the memory market.
As we are a supplier to the global semiconductor and semiconductor-related industries, our customer base continues to become more highly concentrated over time, thereby increasing the potential impact of a sudden change in capital spending by a major customer on our revenues and profitability. As our customer base becomes increasingly more concentrated, large orders from a relatively limited number of customers account for a substantial portion of our sales, which potentially exposes us to more volatility for revenues and earnings. We are also subject to the cyclical capital spending that has historically characterized the semiconductor and semiconductor-related industries. The timing, length, intensity and volatility of the capacity-oriented capital spending cycles of our customers are unpredictable.
The semiconductor industry has also been characterized by constant technological innovation. The growing use of increasingly sophisticated semiconductor devices in mobile consumer products has caused many of our customers to invest in additional semiconductor manufacturing capabilities and capacity. On the other hand, higher design costs for the most advanced ICs could economically constrain leading-edge manufacturing technology customers to focus their resources on only the large technologically advanced products and applications. We believe that, over the long term, our customers will continue to invest in advanced technologies and new materials to enable smaller design rules and higher density applications that fuel demand for process control equipment, although the growth for such equipment may be adversely impacted by higher design costs for advanced ICs, reuse of installed products, and delays in production ramps by our customers in response to higher costs and technical challenges at more advanced technology nodes.
The demand for our products and our revenue levels are driven by our customers’ needs to solve the process challenges that they face as they adopt new technologies required to fabricate advanced ICs that are incorporated into sophisticated mobile devices. The timing for our customers in ordering and taking delivery of process control and yield management equipment is also determined by our customers’ requirements to meet the next generation production ramp schedules, and the timing for capacity expansion to meet end customer demand. During the fiscal year ended June 30, 2016, we experienced strong demand for our products as we released a new generation of inspection products and our foundry customers increased their level of investments in our process control tools. Our earnings will depend not only on our revenue levels, but also on the amount of research and development spending required to meet our customers’ technology roadmaps. We have maintained production volumes and capacity to meet anticipated customer requirements and remain at risk of incurring significant inventory-related and other restructuring charges if business conditions deteriorate. Over the past year, our customers have taken delivery of higher volumes of process control equipment than they did in the previous year. However, any delay or push out by our customers in taking delivery of process control and yield management equipment may cause earnings volatility, due to increases in the risk of inventory related charges as well as timing of revenue recognition due to expiration of credits or volume discounts, which, if not used by a stipulated time frame, will expire.

44

Table of Contents

Proposed Merger with Lam Research
On October 20, 2015, the Company entered into an Agreement and Plan of Merger and Reorganization (the “Merger Agreement”) with Lam Research Corporation (“Lam Research”), under which KLA-Tencor will ultimately become a direct or indirect wholly-owned subsidiary of Lam Research. The Merger has been unanimously approved by the boards of directors of both companies. The consummation of the Merger is conditioned on the satisfaction of customary closing conditions, including domestic and foreign regulatory approvals and performance in all material respects by each party of its obligations under the Merger Agreement. On February 19, 2016, the Merger Agreement was approved by KLA-Tencor’s stockholders and Lam Research’s stockholders approved the issuance of Lam Research’s common stock in the Merger. Refer also to Note 1 “Description of Business and Summary of Significant Accounting Policies” and Item 1A, “Risk Factors.” For additional details on the transaction, refer to the copy of the Merger Agreement attached as an Exhibit to the Form 8-K filed with the U.S. Securities and Exchange Commission (“SEC”) on October 21, 2015.
The following table sets forth some of our key consolidated financial information for each of our last three fiscal years: 
 
Year ended June 30,
(Dollar amounts in thousands)
2016
 
2015
 
2014
Total revenues
$
2,984,493

 
$
2,814,049

 
$
2,929,408

Costs of revenues
$
1,163,391

 
$
1,215,229

 
$
1,232,962

Gross margin percentage
61
%
 
57
%
 
58
%
Net income
$
704,422

 
$
366,158

 
$
582,755

Diluted net income per share
$
4.49

 
$
2.24

 
$
3.47


Total revenues during the fiscal year ended June 30, 2016 increased by 6% compared to the fiscal year ended June 30, 2015. Our year over year revenue growth reflected increases from sales of both our inspection and metrology products as our customers continue to invest in process control and services. Increased revenues during the fiscal year ended June 30, 2016 were also driven by the introduction of our new generation of inspection products as well strong demand from our foundry customers and an increase in the number of post-warranty systems installed at our customers’ sites over this time period for our service revenues.
Total revenues during the fiscal year ended June 30, 2015 decreased by 4% compared to the fiscal year ended June 30, 2014. Revenue decreases from sales of both our inspection and metrology products for the fiscal year ended June 30, 2015 reflected our customers’ decline in capital spending for process control equipment, due to shifts in the timing of the new technology ramps and capacity-related expansion plans.
Revenues and Gross Margin 
 
Year ended June 30,
 
 
 
 
 
 
 
 
(Dollar amounts in thousands)
2016
 
2015
 
2014
 
FY16 vs. FY15
 
FY15 vs. FY14
Revenues:
 
 
 
 
 
 
 
 
 
 
 
 
 
Product
$
2,250,260

 
$
2,125,396

 
$
2,286,437

 
$
124,864

 
6
 %
 
$
(161,041
)
 
(7
)%
Service
734,233

 
688,653

 
642,971

 
45,580

 
7
 %
 
45,682

 
7
 %
Total revenues
$
2,984,493

 
$
2,814,049

 
$
2,929,408

 
$
170,444

 
6
 %
 
$
(115,359
)
 
(4
)%
Costs of revenues
$
1,163,391

 
$
1,215,229

 
$
1,232,962

 
$
(51,838
)
 
(4
)%
 
$
(17,733
)
 
(1
)%
Gross margin percentage
61
%
 
57
%
 
58
%
 
4
%
 
 
 
(1
)%
 
 
Product revenues
Our business is affected by the concentration of our customer base and our customers’ capital equipment procurement schedules as a result of their investment plans. Our product revenues in any particular period are significantly impacted by the amount of new orders that we receive during that period and, depending upon the duration of manufacturing and installation cycles, in the preceding period.

45

Table of Contents

Product revenues increased by 6% in the fiscal year ended June 30, 2016 compared to the fiscal year ended June 30, 2015, primarily due to growth in revenues from our customers in China, Taiwan and Japan, partially offset by lower revenues from our customers in North America, Korea, Rest of Asia and Europe & Israel. The year over year increase in our product revenues were primarily driven by strong demand for our inspection and metrology products, the introduction of our new generation of inspection products and the expansion of semiconductor investments in Asia, particularly in China and Taiwan from our foundry customers.
Product revenues decreased by 7% in the fiscal year ended June 30, 2015 compared to the fiscal year ended June 30, 2014, primarily as a result of lower revenues from our customers in Taiwan, China and the rest of Asia, Europe and Israel, partially offset by higher revenues from our customers in North America, Korea and Japan. The decline in revenues was impacted by the timing of development and new technology ramps of our customers as well as the lower shipments of our products, particularly to our foundry customers in Taiwan, due to timing of capacity-related expansion plans.
Service revenues
Service revenues are generated from maintenance contracts, as well as billable time and material service calls made to our customers after the expiration of the warranty period. The amount of our service revenues is typically a function of the number of post-warranty systems installed at our customers’ sites and the utilization of those systems, but it is also impacted by other factors, such as our rate of service contract renewals, the types of systems being serviced and fluctuations in foreign exchange rates. Service revenues increased sequentially over the fiscal years ended June 30, 2014, 2015 and 2016, primarily as a result of an increase over time in the number of post-warranty systems installed at our customers’ sites over that time period.
Revenues - Top Customers
The following customers each accounted for more than 10% of our total revenues for the indicated periods:
Year ended June 30,
2016
 
2015
 
2014
Micron Technology, Inc.
 
Intel Corporation
 
Intel Corporation
Taiwan Semiconductor Manufacturing Company Limited
 
Samsung Electronics Co., Ltd.
 
Samsung Electronics Co., Ltd.

 
Taiwan Semiconductor Manufacturing Company Limited
 
Taiwan Semiconductor Manufacturing Company Limited
Revenues by region
Revenues by region for the periods indicated were as follows:
 
Year ended June 30,
(Dollar amounts in thousands)
2016
 
2015
 
2014
Taiwan
$
894,557

 
30
%
 
$
691,482

 
25
%
 
$
741,470

 
25
%
North America
521,335

 
18
%
 
815,914

 
29
%
 
705,159

 
24
%
Japan
444,216

 
15
%
 
426,963

 
15
%
 
334,653

 
11
%
China
430,074

 
14
%
 
162,669

 
6
%
 
260,089

 
9
%
Korea
367,905

 
12
%
 
405,320

 
14
%
 
371,139

 
13
%
Europe & Israel
167,936

 
6
%
 
194,670

 
7
%
 
306,779

 
11
%
Rest of Asia
158,470

 
5
%
 
117,031

 
4
%
 
210,119

 
7
%
Total
$
2,984,493

 
100
%
 
$
2,814,049

 
100
%
 
$
2,929,408

 
100
%
A significant portion of our revenues continues to be generated in Asia, where a substantial portion of the world’s semiconductor manufacturing capacity is located, and we expect that trend to continue.

46

Table of Contents

Gross margin
Our gross margin fluctuates with revenue levels and product mix and is affected by variations in costs related to manufacturing and servicing our products, including our ability to scale our operations efficiently and effectively in response to prevailing business conditions.
The following table summarizes the major factors that contributed to the changes in gross margin percentage:
 
Gross Margin Percentage
Fiscal year ended June 30, 2014
57.9
 %
Revenue volume of products and services
(1.1
)%
Mix of products and services sold
0.3
 %
Manufacturing labor, overhead and efficiencies
(0.6
)%
Other service and manufacturing costs
0.3
 %
Fiscal year ended June 30, 2015
56.8
 %
Revenue volume of products and services
0.4
 %
Mix of products and services sold
2.6
 %
Manufacturing labor, overhead and efficiencies
0.7
 %
Other service and manufacturing costs
0.5
 %
Fiscal year ended June 30, 2016
61.0
 %
Changes in gross margin percentage driven by revenue volume of products and services reflect our ability to leverage existing infrastructure to generate higher revenues. It also includes the effect of fluctuations in foreign exchange rates, average customer pricing and customer revenue deferrals associated with volume purchase agreements. Changes in gross margin percentage from mix of products and services sold reflect the impact of changes in the composition within product and service offerings. Changes in gross margin percentage from manufacturing labor, overhead and efficiencies reflect our ability to manage costs and drive productivity as we scale our manufacturing activity to respond to customer requirements; this includes the impact of capacity utilization, use of overtime and variability of cost structure. Changes in gross margin percentage from other service and manufacturing costs include the impact of customer support costs, including the efficiencies with which we deliver services to our customers, and the effectiveness with which we manage our production plans and inventory risk.
Our gross margin increased to 61.0% during the fiscal year ended June 30, 2016 from 56.8% during the fiscal year ended June 30, 2015, primarily due to a favorable mix of products and services sold, an increase in manufacturing efficiencies driven by lower warranty costs as well as a decrease in severance-related expenses, and higher revenue volume of products and service.
Our gross margin decreased to 56.8% during the fiscal year ended June 30, 2015 from 57.9% during the fiscal year ended June 30, 2014, primarily due to lower volume of products and services, as well as a reduction in manufacturing efficiencies driven by lower manufacturing output and severance-related expenses, a substantial amount of which is related to our global workforce reduction plan that we announced in the fourth quarter of the fiscal year ended June 30, 2015, refer to Note 14, “Restructuring Charges” for additional details. The above decreases were partially offset by a favorable mix of products and services sold and efficiencies derived from other service and manufacturing costs.
Research and Development (“R&D”) 
 
Year ended June 30,
 
 
 
 
 
 
 
 
(Dollar amounts in thousands)
2016
 
2015
 
2014
 
FY16 vs. FY15
 
FY15 vs. FY14
R&D expenses
$
481,258

 
$
530,616

 
$
539,469

 
$
(49,358
)
 
(9
)%
 
$
(8,853
)
 
(2
)%
R&D expenses as a percentage of total revenues
16
%
 
19
%
 
18
%
 
(3
)%
 
 
 
1
%
 
 
R&D expenses may fluctuate with product development phases and project timing as well as our focused R&D efforts that are aligned with our overall business strategy. As technological innovation is essential to our success, we may incur significant costs associated with R&D projects, including compensation for engineering talent, engineering material costs, and other expenses.

47

Table of Contents

R&D expenses during the fiscal year ended June 30, 2016 were lower compared to the fiscal year ended June 30, 2015, primarily due to a decrease in employee related expenses, including severance-related expenses of $33.9 million as a result of the reduced headcount from our global workforce reduction that we initiated during the three months ended June 30, 2015, partially offset by an increase in variable compensation of $10.6 million. Additionally, there was a decrease in engineering materials and supplies expenses of $21.0 million and an increase in the benefit to R&D expense from external funding of $5.4 million.
R&D expenses during the fiscal year ended June 30, 2015 were lower compared to the fiscal year ended June 30, 2014, primarily due to a decrease in engineering materials and consulting costs of $19.8 million associated with the completion of major platform developments, a decrease in depreciation expense of $2.1 million and a decrease in travel expenses of $1.2 million. This was partially offset by an increase in employee-related expenses of $10.6 million mainly as a result of our severance-related expenses, a substantial amount of which is related to our global workforce reduction plan that we announced in the fourth quarter of the fiscal year ended June 30, 2015, refer to Note 14, “Restructuring Charges” for additional details. In addition, the decrease was partially offset by a $6.3 million reduction in external funding used to offset the cost of R&D activities.
Our future operating results will depend significantly on our ability to produce products and provide services that have a competitive advantage in our marketplace. To do this, we believe that we must continue to make substantial and focused investments in our research and development. We remain committed to product development in new and emerging technologies as we address the yield challenges our customers face at future technology nodes.
Selling, General and Administrative (“SG&A”)
 
Year ended June 30,
 
 
 
 
 
 
 
 
(Dollar amounts in thousands)
2016
 
2015
 
2014
 
FY16 vs. FY15
 
FY15 vs. FY14
SG&A expenses
$
379,399

 
$
406,864

 
$
384,907

 
$
(27,465
)
 
(7
)%
 
$
21,957

 
6
%
SG&A expenses as a percentage of total revenues
13
%
 
14
%
 
13
%
 
(1
)%
 
 
 
1
%
 
 
SG&A expenses during the fiscal year ended June 30, 2016 were lower compared to the fiscal year ended June 30, 2015, primarily due to a decrease in employee-related expenses, including severance-related expenses, of $28.0 million as a result of the reduced headcount from our global workforce reduction that we initiated during the three months ended June 30, 2015 partially offset by an increase in variable compensation of $16.4 million, a decrease in cost of support for sales evaluation of $8.6 million, a decrease in contributions to support our corporate social responsibility program of $7.0 million and a decrease in travel-related expenses of $4.7 million. The decreases above were partially offset by an increase in our merger-related expenses of $15.6 million pertaining to the pending Merger with Lam Research, principally for financial advisory services including the fairness opinion fees, employee-related expenses and legal fees during the fiscal year ended June 30, 2016.
SG&A expenses during the fiscal year ended June 30, 2015 were higher compared to the fiscal year ended June 30, 2014, primarily due to an increase in employee-related expenses of $8.3 million mainly as a result of severance-related expenses, a substantial amount of which is related to our global workforce reduction plan that we announced in the fourth quarter of the fiscal year ended June 30, 2015 (refer to Note 14, “Restructuring Charges” for additional details), an increase in cost of support for sales evaluation of $6.5 million, an increase in certain expenses of $2.5 million as a result of our one-time leveraged recapitalization expense that was completed in the three months ended December 31, 2014, a payment related to a contractual settlement for $2.0 million, an increase due to the impairment charge recorded for certain long-lived assets of $1.7 million and an increase in legal fees of $1.6 million. In addition, during the three months ended December 31, 2013, SG&A expenses were favorably impacted by our receipt of $1.1 million in proceeds from a class action settlement, as well as our recovery of $1.1 million in receivables that had previously been classified as a bad debt expense during the three months ended December 31, 2013, both of which resulted in a decrease of our SG&A expense for the fiscal year ended June 30, 2014. The increases described above were partially offset by a decrease in travel related expenses of $4.3 million and a decrease in marketing-related expenses of $1.9 million.

48

Table of Contents

Restructuring Charges
During the fourth quarter of the fiscal year ended 2015, we announced a plan to reduce our global employee workforce to streamline our organization and business processes in response to changing customer requirements in its industry. The goals of this reduction were to enable continued innovation, direct our resources toward its best opportunities and lower our ongoing expense run rate. We substantially completed our global workforce reduction during the fiscal year ended June 30, 2016 and recorded an $8.9 million net restructuring charge, of which $3.6 million was recorded to costs of revenues, $1.6 million to research and development expense and $3.7 million to selling, general and administrative expense. During the fiscal year ended June 30, 2015, we recorded a $31.6 million net restructuring charge, of which $8.0 million was recorded to costs of revenues, $11.1 million to research and development expense and $12.5 million to selling, general and administrative expense. Refer to Note 14, “Restructuring Charges” for additional details.
The following table shows the activity primarily related to accrual for severance and benefits for the fiscal years ended June 30, 2016 and 2015:
 
Year ended June 30,
(In thousands)
2016
 
2015
Beginning balance
$
24,887

 
$
2,329

Restructuring costs
8,926

 
31,569

Adjustments
(142
)
 
1,177

Cash payments
(33,084
)
 
(10,188
)
Ending balance
$
587

 
$
24,887

The remaining accrual for severance and benefits as of June 30, 2016 is expected to be paid out by the end of our quarter ending December 31, 2016.
Interest Expense and Other Expense (Income), Net
 
Year ended June 30,
(Dollar amounts in thousands)
2016
 
2015
 
2014
Interest expense
$
122,887

 
$
106,009

 
$
53,812

Other expense (income), net
$
(20,634
)
 
$
(10,469
)
 
$
(16,203
)
Interest expense as a percentage of total revenues
4
%
 
4
%
 
2
%
Other expense (income), net as a percentage of total revenues
1
%
 
%
 
1
%
The increase in interest expense during the fiscal year ended June 30, 2016 compared to the fiscal year ended June 30, 2015 was primarily attributable to the $2.50 billion aggregate principal amount of senior, unsecured long-term notes (collectively referred to as “Senior Notes”), the $750.0 million unsecured prepayable term loans and the $500.0 million unfunded revolving credit facility which were executed during the three months ended December 31, 2014 and which were not outstanding for the entire fiscal year ended June 30, 2015. In addition, the $750.0 million of 2018 Senior Notes were redeemed during the three months ended December 31, 2014.
The increase in interest expense during the fiscal year ended June 30, 2015 compared to the fiscal year ended June 30, 2014 was primarily attributable to the issuance of $2.50 billion aggregate principal amount of senior, unsecured long-term notes and entry into the $750.0 million unsecured prepayable term loan facility during the three months ended December 31, 2014, as compared to $750.0 million of 2018 Senior Notes for the fiscal year ended June 30, 2014.
Other expense (income), net is comprised primarily of realized gains or losses on sales of marketable securities, gains or losses from revaluations of certain foreign currency denominated assets and liabilities as well as foreign currency contracts, impairments associated with equity investments in privately-held companies, interest related accruals (such as interest and penalty accruals related to our tax obligations) and interest income earned on our investment and cash portfolio.
The increase in other expense (income), net during the fiscal year ended June 30, 2016 compared to the fiscal year ended June 30, 2015 was primarily due to reduction of interest and penalty accruals related to uncertain tax positions of $5.5 million and an increase of $4.5 million for gain on the sale of equity investments in privately-held companies net of impairment charges.

49

Table of Contents

The decrease in other expense (income), net during the fiscal year ended June 30, 2015 compared to the fiscal year ended June 30, 2014 was primarily attributable to a net decline of $4.7 million in gains from the sale of equity investments in privately-held companies, a $1.1 million decrease in interest income from our investment portfolio as a result of our decision to liquidate certain marketable securities and a $1.1 million increase in net foreign currency losses resulting from the volatility of the foreign currencies against the U.S. dollar, which was partially offset by a decrease in an impairment charge of $1.0 million related to an equity investment in a privately-held company that was deemed to be other-than-temporary impairment and an increase of $0.9 million of realized gains from the investment portfolio liquidation.
Loss on extinguishment of debt and other, net
For the fiscal year ended June 30, 2015, loss on extinguishment of debt and other, net, reflected a pre-tax net loss of $131.7 million associated with the redemption of our $750.0 million of 2018 Senior Notes during the three months ended December 31, 2014. Included in the loss on extinguishment of debt and other, net is the $1.2 million gain on the non-designated forward contract that was entered into by us in anticipation of the redemption of the 2018 Senior Notes, which were redeemed during the three months ended December 31, 2014. Refer to “Note 6, Debt” and “Note 15, Derivative Instruments and Hedging Activities” for further details. We had no loss on extinguishment of debt and other, net, in the fiscal years ended June 30, 2016 and 2014.
Provision for Income Taxes
The following table provides details of income taxes:
 
Year ended June 30,
(Dollar amounts in thousands)
2016
 
2015
 
2014
Income before income taxes
$
858,192

 
$
434,131

 
$
734,461

Provision for income taxes
$
153,770

 
$
67,973

 
$
151,706

Effective tax rate
17.9
%
 
15.7
%
 
20.7
%
The provision for income taxes differs from the statutory U.S. federal rate primarily due to foreign income with lower tax rates, tax credits, and other domestic incentives.
Tax expense as a percentage of income during the fiscal year ended June 30, 2016 was 17.9% compared to 15.7% for the fiscal year ended June 30, 2015. Tax expense as a percentage of income increased primarily due to an increase in the percentage of income earned in the U.S. compared to income earned outside the U.S. in jurisdictions with lower tax rates. During the fiscal year ended June 30, 2015, the loss on extinguishment of debt decreased income earned in the U.S.
Tax expense as a percentage of income during the fiscal year ended June 30, 2015 was 15.7% compared to 20.7% for the fiscal year ended June 30, 2014. Tax expense as a percentage of income decreased primarily due to an increase in our research and development credits, an increase in the domestic manufacturing deduction as a percentage of income, and a decrease in the percentage of income earned in the U.S. as a result of the loss on extinguishment of debt compared to income earned outside the U.S. in jurisdictions with lower tax rates.
Our future effective income tax rate depends on various factors, such as tax legislation, the geographic composition of our pre-tax income, the amount of our pre-tax income as business activities fluctuate, non-deductible expenses incurred in connection with acquisitions, research and development credits as a percentage of aggregate pre-tax income, the domestic manufacturing deduction, non-taxable or non-deductible increases or decreases in the assets held within our Executive Deferred Savings Plan, the tax effects of employee stock activity and the effectiveness of our tax planning strategies.
In the normal course of business, we are subject to tax audits in various jurisdictions, and such jurisdictions may assess additional income or other taxes against us. Although we believe our tax estimates are reasonable, the final determination of tax audits and any related litigation could be materially different from our historical income tax provisions and accruals. The results of an audit or litigation could have a material adverse effect on our results of operations or cash flows in the period or periods for which that determination is made.

50

Table of Contents

Liquidity and Capital Resources
 
As of June 30,
(Dollar amounts in thousands)
2016
 
2015
 
2014
Cash and cash equivalents
$
1,108,488

 
$
838,025

 
$
630,861

Marketable securities
1,382,806

 
1,549,086

 
2,521,776

Total cash, cash equivalents and marketable securities
$
2,491,294

 
$
2,387,111

 
$
3,152,637

Percentage of total assets
50
%
 
49
%
 
57
%
 
 
 
 
 
 
 
Year ended June 30,
(In thousands)
2016
 
2015
 
2014
Cash flows:
 
 
 
 
 
Net cash provided by operating activities
$
759,696

 
$
605,906

 
$
778,886

Net cash provided by (used in) investing activities
144,687

 
918,221

 
(676,109
)
Net cash used in financing activities
(636,702
)
 
(1,302,972
)
 
(458,887
)
Effect of exchange rate changes on cash and cash equivalents
2,782

 
(13,991
)
 
1,581

Net increase (decrease) in cash and cash equivalents
$
270,463

 
$
207,164

 
$
(354,529
)
Cash and Cash Equivalents and Marketable Securities:
As of June 30, 2016, our cash, cash equivalents and marketable securities totaled $2.49 billion, which is an increase of $104.2 million from June 30, 2015. The increase is primarily attributable to our cash generated from operations and our net proceeds from investing activities, partially offset by the payment of regular quarterly cash dividends and a special cash dividend with respect to fully vested restricted stock units with dividend equivalent rights aggregating to $346.3 million, payment for stock repurchases of $181.7 million and payment of term loans of $135.0 million. As of June 30, 2016, $1.73 billion of our $2.49 billion of cash, cash equivalents, and marketable securities were held by our foreign subsidiaries and branch offices. We currently intend to indefinitely reinvest $1.57 billion of the cash held by our foreign subsidiaries and branch offices. If, however, a portion of these funds were to be repatriated to the United States, we would be required to accrue and pay U.S. and foreign taxes of approximately 30%-50% of the funds repatriated. The amount of taxes due will depend on the amount and manner of the repatriation, as well as the location from which the funds are repatriated. We have accrued (but have not paid) U.S. taxes on the remaining cash of $157.3 million of the $1.73 billion held by our foreign subsidiaries and branch offices. As such, these funds can be returned to the U.S. without accruing any additional U.S. tax expense.
Cash Dividends and Special Cash Dividend:
The total amount of regular quarterly cash dividends paid during the fiscal years ended June 30, 2016, 2015 and 2014 was $324.5 million, 324.8 million and $298.9 million, respectively. The increase in the amount of regular quarterly cash dividends paid during the fiscal year ended June 30, 2016 reflected the increase in the level of our regular quarterly cash dividend from $0.50 to $0.52 per share that was instituted during the three months ended September 30, 2015. The amount of accrued dividends payable for regular quarterly cash dividends on unvested restricted stock units with dividend equivalent rights was $2.7 million and $0.9 million as of June 30, 2016 and 2015, respectively. We did not have accrued dividends payable as of June 30, 2014. These amounts will be paid upon vesting of the underlying unvested restricted stock units as described in Note 7, “Equity and Long-term Incentive Compensation Plans.”

51

Table of Contents

On November 19, 2014, we declared a special cash dividend of $16.50 per share on our outstanding common stock which was paid on December 9, 2014 to our stockholders of record as of the close of business on December 1, 2014. Additionally, in connection with the special cash dividend, our Board of Directors and our Compensation Committee of our Board of Directors approved a proportionate and equitable adjustment to outstanding equity awards (restricted stock units and stock options) under the 2004 Equity Incentive Plan (the “2004 Plan”), as required by the 2004 Plan, subject to the vesting requirements of the underlying awards. As the adjustment was required by the 2004 Plan, the adjustment to the outstanding awards did not result in any incremental compensation expense due to modification of such awards, under the authoritative guidance. The declaration and payment of the special cash dividend was part of our leveraged recapitalization transaction under which the special cash dividend was financed through a combination of existing cash and proceeds from the debt financing disclosed in Note 6, “Debt” that was completed during the three months ended December 31, 2014. The total amount of the special cash dividend accrued by the Company during the three months ended December 31, 2014 was approximately $2.76 billion, substantially all of which was paid out during the three months ended December 31, 2014, except for the aggregate special cash dividend of $43.0 million that was accrued for the unvested restricted stock units. As of June 30, 2016 and 2015, we have $16.9 million and $41.1 million, respectively, of accrued dividends payable for the special cash dividend with respect to outstanding unvested restricted stock units, which will be paid when such underlying unvested restricted stock units vest as described in detail in Note 7, “Equity and Long-term Incentive Compensation Plans.” We paid a special cash dividend with respect to vested restricted stock units during the fiscal years ended June 30, 2016 and 2015 of $21.8 million and $1.8 million, respectively. We did not declare any special cash dividend in the fiscal years ended June 30, 2016 and 2014. Other than the special cash dividend declared during the three months ended December 31, 2014, we historically have not declared any special cash dividends.
Stock Repurchases:
The shares repurchased under our stock repurchase program have reduced our basic and diluted weighted-average shares outstanding. The stock repurchase program is intended, in part, to offset shares issued in connection with the purchases under our ESPP program and the vesting of employee restricted stock units. In connection with entering into the Merger Agreement with Lam Research, we suspended further repurchases under our repurchase program effective October 21, 2015.
Fiscal Year 2016 Compared to Fiscal Year 2015
Cash Flows from Operating Activities:
We have historically financed our liquidity requirements through cash generated from operations. Net cash provided by operating activities during the fiscal year ended June 30, 2016 increased compared to the fiscal year ended June 30, 2015, from $605.9 million to $759.7 million primarily as a result of the following key factors:
An increase in collections of approximately $294.0 million mostly due to higher shipments during the fiscal year ended June 30, 2016 compared to the fiscal year ended June 30, 2015;
A decrease in payroll and employee-related payments of approximately $34.0 million during the fiscal year ended June 30, 2016 compared to the fiscal year ended June 30, 2015; partially offset by
An increase in vendor payments of approximately $65.0 million during the fiscal year ended June 30, 2016 mainly due to higher inventory purchases compared to the fiscal year ended June 30, 2015;
A net increase of realized foreign exchange hedge losses of approximately $48.0 million during the fiscal year ended June 30, 2016 compared to the fiscal year ended June 30, 2015, mainly due to the substantial foreign exchange fluctuations in Japanese Yen during these periods;
An increase in debt interest payments of approximately $27.0 million during the fiscal year ended June 30, 2016 due to higher average outstanding debt balances compared to the fiscal year ended June 30, 2015;
An increase in income tax and other tax payments net of tax refunds of approximately $22.0 million during the fiscal year ended June 30, 2016 compared to the fiscal year ended June 30, 2015; and
An increase in cash LTI payments of approximately $13.0 million during the fiscal year ended June 30, 2016 compared to the fiscal year ended June 30, 2015.
Cash Flows from Investing Activities:
Net cash provided by investing activities during the fiscal year ended June 30, 2016 decreased to $144.7 million compared to the fiscal year ended June 30, 2015 from net cash provided in investing activities of $918.2 million, primarily as a result of our strategic decision to liquidate certain marketable securities in our investment portfolio to fund our working capital requirements during the fiscal year ended June 30, 2015, partially offset by approximately $14.0 million lower capital expenditures during the fiscal year ended June 30, 2016, as compared to the fiscal year ended June 30, 2015.

52

Table of Contents

Cash Flows from Financing Activities:
Net cash used in financing activities during the fiscal year ended June 30, 2016 decreased compared to the fiscal year ended June 30, 2015, from $1.30 billion to $636.7 million, primarily as a result of the following key factors:
A decrease in payment of dividends to stockholders of $2.70 billion, primarily from the payment of special cash dividend during the fiscal year ended June 30, 2015;
A decrease in repayment of debt of approximately $781.0 million mainly as a result of the redemption of the 2018 Senior Notes during the fiscal year ended June 30, 2015;
A decrease in common stock repurchases of $421.0 million during the fiscal year ended June 30, 2016 compared to the fiscal year ended June 30, 2015. In connection with entering into the Merger Agreement, we suspended further repurchases under our repurchase program effective October 21, 2015; partially offset by
Net proceeds of $3.22 billion from the issuance of Senior Notes and the term loans during the fiscal year ended June 30, 2015.
Fiscal Year 2015 Compared to Fiscal Year 2014
Cash Flows from Operating Activities:
Net cash provided by operating activities during the fiscal year ended June 30, 2015 decreased compared to the fiscal year ended June 30, 2014, from $778.9 million to $605.9 million primarily as a result of the following key factors:
A decrease of cash collections by approximately $270.0 million during the fiscal year ended June 30, 2015 compared to the fiscal year ended June 30, 2014,
An increase of debt-related interest payments of approximately $40.0 million during the fiscal year ended June 30, 2015 compared to the fiscal year ended June 30, 2014,
An increase in payments of approximately $15.0 million upon vesting of cash-based long-term incentive (“Cash LTI”) awards during the fiscal year ended June 30, 2015 under our Cash LTI employee compensation plan, compared to the fiscal year ended June 30, 2014,
An increase in payroll payments of approximately $15.0 million during the fiscal year ended June 30, 2015 compared to the fiscal year ended June 30, 2014, partially offset by
A decrease in accounts payable payments of approximately $143.0 million during the fiscal year ended June 30, 2015 compared to the fiscal year ended June 30, 2014, and
A decrease in income tax and other tax payments net of tax refunds of approximately $30.0 million during the fiscal year ended June 30, 2015 compared to the fiscal year ended June 30, 2014.
Cash Flows from Investing Activities:
Net cash provided by investing activities during the fiscal year ended June 30, 2015 increased to $918.2 million compared to the fiscal year ended June 30, 2014 from net cash used in investing activities of $676.1 million, primarily as a result of an increase in the proceeds from sale of available-for-sale and trading securities, net of sales and maturities, of approximately $964.0 million during the fiscal year ended June 30, 2015, compared to the purchases of available-for-sale and trading securities, net of sales and maturities, of approximately $593.0 million during fiscal year ended June 30, 2014. In addition, we acquired a privately-held company for a total purchase consideration of $18.0 million in cash during the fiscal year ended June 30, 2014.
Cash Flows from Financing Activities:
Net cash used in financing activities during the fiscal year ended June 30, 2015 increased compared to the fiscal year ended June 30, 2014, from $458.9 million to $1.30 billion, primarily as a result of the following key factors:
An increase in dividend payments of $2.74 billion during the fiscal year ended June 30, 2015 compared to the fiscal year ended June 30, 2014, reflecting the payments for the special cash dividend during the fiscal year ended June 30, 2015 and an increase in our quarterly dividend payout amount from $0.45 to $0.50 per share that was instituted during the three months ended September 30, 2014,
Payments for redemption of the 2018 Senior Notes and payments for the term loans, including prepayment for the principal amount for the term loans, aggregating to $916.0 million during the fiscal year ended June 30, 2015, whereas no such payments were made during the fiscal year ended June 20, 2014,
An increase in common stock repurchases of $362.0 million during the fiscal year ended June 30, 2015 compared to the fiscal year ended June 30, 2014 and

53

Table of Contents

A decrease in proceeds from the exercise of stock options of $65.0 million during the fiscal year ended June 30, 2015 compared to the fiscal year ended June 30, 2014, partially offset by
Net proceeds of $3.22 billion from issuance of Senior Notes and the term loans during the fiscal year ended June 30, 2015.
Senior Notes:
In November 2014, we issued $2.50 billion aggregate principal amount of senior, unsecured long-term notes (collectively referred to as “Senior Notes”). We issued the Senior Notes as part of the leveraged recapitalization plan under which the proceeds from the Senior Notes in conjunction with the proceeds from the term loans (described below) and cash on hand were used (x) to fund a special cash dividend of $16.50 per share, aggregating to approximately $2.76 billion, (y) to redeem $750.0 million of 2018 Senior Notes, including associated redemption premiums, accrued interest and other fees and expenses and (z) for other general corporate purposes, including repurchases of shares pursuant to our stock repurchase program. The interest rate specified for each series of the Senior Notes will be subject to adjustments from time to time if Moody’s Investor Service, Inc. (“Moody’s”) or Standard & Poor’s Ratings Services (“S&P”) or, under certain circumstances, a substitute rating agency selected by us as a replacement for Moody’s or S&P, as the case may be (a “Substitute Rating Agency”), downgrades (or subsequently upgrades) its rating assigned to the respective series of Senior Notes such that the adjusted rating is below investment grade. If the adjusted rating of any series of Senior Notes from Moody’s (or, if applicable, any Substitute Rating Agency) is decreased to Ba1, Ba2, Ba3 or B1 or below, the stated interest rate on such series of Senior Notes as noted above will increase by 25 bps, 50 bps, 75 bps or 100 bps, respectively (“bps” refers to Basis Points and 1% is equal to 100 bps). If the rating of any series of Senior Notes from S&P (or, if applicable, any Substitute Rating Agency) with respect to such series of Senior Notes is decreased to BB+, BB, BB- or B+ or below, the stated interest rate on such series of Senior Notes as noted above will increase by 25 bps, 50 bps, 75 bps or 100 bps, respectively. The interest rates on any series of Senior Notes will permanently cease to be subject to any adjustment (notwithstanding any subsequent decrease in the ratings by any of Moody’s, S&P and, if applicable, any Substitute Rating Agency) if such series of Senior Notes becomes rated “Baa1” (or its equivalent) or higher by Moody’s (or, if applicable, any Substitute Rating Agency) and “BBB+” (or its equivalent) or higher by S&P (or, if applicable, any Substitute Rating Agency), or one of those ratings if rated by only one of Moody’s, S&P and, if applicable, any Substitute Rating Agency, in each case with a stable or positive outlook. In October 2014, we entered into a series of forward contracts to lock the 10-year treasury rate (“benchmark rate”) on a portion of the Senior Notes with a notional amount of $1.00 billion in aggregate. For additional details, refer to Note 15, “Derivative Instruments and Hedging Activities.”
The original discount on the Senior Notes amounted to $4.0 million and is being amortized over the life of the debt. Interest is payable semi-annually on May 1 and November 1 of each year. The debt indenture (the “Indenture”) includes covenants that limit our ability to grant liens on its facilities and enter into sale and leaseback transactions, subject to certain allowances under which certain sale and leaseback transactions are not restricted. As of June 30, 2016, we were in compliance with all of the covenants under the Indenture associated with the Senior Notes.
Credit Facility (Term Loans and Unfunded Revolving Credit Facility):
In November 2014, we entered into $750.0 million of five-year senior unsecured prepayable term loans and a $500.0 million unfunded revolving credit facility (collectively, the “Credit Facility”) under the Credit Agreement. The interest under the Credit Facility will be payable on the borrowed amounts at the London Interbank Offered Rate (“LIBOR”) plus a spread, which is currently 125 bps, and this spread is subject to adjustment in conjunction with our credit rating downgrades or upgrades by Moody’s and S&P. The spread ranges from 100 bps to 175 bps based on the Company’s then effective credit rating. We are also obligated to pay an annual commitment fee of 15 bps on the daily undrawn balance of the revolving credit facility, which is also subject to an adjustment in conjunction with our credit rating downgrades or upgrades. The annual commitment fee ranges from 10 bps to 25 bps on the daily undrawn balance of the revolving credit facility, depending upon the then effective credit rating. Principal payments with respect to the term loans will be made on the last day of each calendar quarter and any unpaid principal balance of the term loans, including accrued interest, shall be payable on November 14, 2019 (the “Maturity Date”). We may prepay the term loans and unfunded revolving credit facility at any time without a prepayment penalty. During the fiscal year ended June 30, 2016, we made term loan principal payments of $135.0 million.

54

Table of Contents

Future principal payments for the term loans (without giving effect to $117.5 million of principal prepayments made as of June 30, 2016 that shall be applied to the future scheduled quarterly payments) as of June 30, 2016, are as follows:
Fiscal Quarters Ending
 
Quarterly Payment
(in thousands)
September 30, 2016 through December 31, 2016
 
$
9,375

March 31, 2017 through December 31, 2017
 
$
14,063

March 31, 2018 through September 30, 2019
 
$
18,750

December 31, 2019
 
$
487,500

The Credit Facility requires us to maintain an interest expense coverage ratio as described in the Credit Agreement, on a quarterly basis, covering the trailing four consecutive fiscal quarters of no less than 3.50 to 1.00. In addition, we are required to maintain the maximum leverage ratio as described in the Credit Agreement, on a quarterly basis, covering the trailing four consecutive fiscal quarters for the fiscal quarters as described below.
Fiscal Quarters Ending
 
Maximum Leverage Ratio
June 30, 2016 through September 30, 2016
 
3.75:1.00
December 31, 2016 and March 31, 2017
 
3.50:1.00
Thereafter
 
3.00:1.00
We were in compliance with the financial covenants under the Credit Agreement as of June 30, 2016 (the interest expense coverage ratio was 9.12 to 1.00 and the leverage ratio was 2.75 to 1.00) and had no outstanding borrowings under the unfunded revolving credit facility. Considering our current liquidity position, short-term financial forecasts and ability to prepay the term loans, if necessary, we expect to continue to be in compliance with our financial covenants at the end of our first quarter of fiscal year ending June 30, 2017.
Debt Redemption:
In December 2014, we redeemed the $750.0 million aggregate principal amount of 2018 Senior Notes. The redemption resulted in a pre-tax net loss on extinguishment of debt of $131.7 million for the three months ended December 31, 2014, after an offset of a $1.2 million of gain upon the termination of the non-designated forward contract described below.
In addition, in November 2014, we entered into a non-designated forward contract to lock the treasury rate to be used for determining the redemption amount as part of our plan to redeem the existing 2018 Senior Notes. The notional amount of the non-designated forward contract was $750.0 million. For additional details, refer to Note 15, “Derivative Instruments and Hedging Activities.”
Merger-related Commitment and Fees:
We have an agreement with a financial advisor in relation to the pending Merger with Lam Research. We agreed to pay a fee of approximately $58.0 million, $0.1 million of which was paid upon the execution of the engagement letter and $5.0 million of which was paid upon delivery of the fairness opinion, and the remaining portion of which will be paid upon, and subject to, consummation of the Merger (provided that the final actual fee will be, in part, based on an average of the closing prices of Lam Research common stock over ten trading days approaching the closing of the Merger). During the fiscal year ended June 30, 2016, $5.1 million of the above fees were recorded in selling, general and administrative line of the consolidated statements of operations. In addition, the Merger Agreement contains certain termination rights for us and further provides that we may be required to pay a termination fee of $290.0 million to Lam Research under certain circumstances.


55

Table of Contents

Contractual Obligations
The following is a schedule summarizing our significant obligations to make future payments under contractual obligations as of June 30, 2016: 
 
Fiscal year ending June 30,
(In thousands)
Total
 
2017
 
2018
 
2019
 
2020
 
2021
 
2022 and thereafter
 
Others
Debt obligations(1)
$
3,076,250

 
$

 
$
250,000

 
$
70,000

 
$
756,250

 
$

 
$
2,000,000

 
$

Interest payment associated with all
debt obligations
(2)
946,076

 
119,053

 
116,084

 
112,650

 
100,976

 
92,875

 
404,438

 

Purchase commitments(3)
292,937

 
290,576

 
2,100

 
97

 

 
164

 

 

Income taxes
payable
(4)
54,030

 

 

 

 

 

 

 
54,030

Operating leases
17,058

 
8,026

 
5,006

 
2,363

 
1,613

 
25

 
25

 

Cash long-term incentive program(5)
121,447

 
47,942

 
37,085

 
24,908

 
11,512

 

 

 

Pension obligations(6)
22,086

 
1,301

 
1,487

 
1,536

 
1,452

 
1,664

 
14,646

 

Executive Deferred
Savings Plan
(7)
162,289

 

 

 

 

 

 

 
162,289

Other(8)
43,406

 
8,917

 
30,520

 
3,576

 
393

 

 

 

Total contractual cash obligations
$
4,735,579

 
$
475,815

 
$
442,282

 
$
215,130

 
$
872,196

 
$
94,728

 
$
2,419,109

 
$
216,319

__________________ 
(1)
In November 2014, we issued $750.0 million aggregate principal amount of term loans due in fiscal year 2020 (outstanding balance of $576.3 million as of June 30, 2016) and $2.50 billion aggregate principal amount of Senior Notes due from fiscal year 2018 to fiscal year 2035. During our fiscal year ended June 30, 2016, we made term loan principal payments of $135.0 million.
(2)
The interest payments associated with the Senior Notes obligations included in the table above are based on the principal amount multiplied by the applicable coupon rate for each series of Senior Notes. Our future interest payments are subject to change if our then effective credit rating is below investment grade as discussed above. The interest payments under the term loans are payable on the borrowed amounts at the LIBOR plus 125 bps. As of June 30, 2016, we utilized the existing interest rates to project our estimated term loans interest payments for the next five years. The interest payment under the revolving credit facility for the undrawn balance is payable at 15 bps as a commitment fee based on the daily undrawn balance and we utilized the existing rate for the projected interest payments included in the table above. Our future interest payments for the term loans and the revolving credit facility are subject to change due to future fluctuations in the LIBOR rates as well as any upgrades or downgrades to our then effective credit rating.
(3)
Represents an estimate of significant commitments to purchase inventory from our suppliers as well as an estimate of significant purchase commitments associated with other goods and services in the ordinary course of business. Our liability under these purchase commitments is generally restricted to a forecasted time-horizon as mutually agreed upon between the parties. This forecasted time-horizon can vary among different suppliers. Actual expenditures will vary based upon the volume of the transactions and length of contractual service provided. In addition, the amounts paid under these arrangements may be less in the event the arrangements are renegotiated or canceled. Certain agreements provide for potential cancellation penalties.
(4)
Represents the estimated income tax payable obligation related to uncertain tax positions as well as related accrued interest. We are unable to make a reasonably reliable estimate of the timing of payments in individual years due to uncertainties in the timing of tax audit outcomes.
(5)
Represents the amount committed under our cash long-term incentive program. The expected payment after estimated forfeitures is approximately $97.9 million.
(6)
Represents an estimate of expected benefit payments up to fiscal year 2026 that was actuarially determined and excludes the minimum cash required to contribute to the plan. As of June 30, 2016, our defined pension plans do not have material required minimum cash contribution obligations.

56

Table of Contents

(7)
Represents the amount committed under our non-qualified executive deferred compensation plan. We are unable to make a reasonably reliable estimate of the timing of payments in individual years due to the uncertainties in the timing around participant’s separation and any potential changes that participants may decide to make to the previous distribution elections.
(8)
Includes $23.8 million of employee-related retention commitments which are estimated to be paid over the stipulated period in connection with the pending Merger with Lam Research as well as the amount committed for accrued dividends payable of $19.6 million, substantially all of which are for the special cash dividend for the unvested restricted stock units as of the dividend record date as well as restricted stock units granted with dividend equivalent rights. For additional details, refer to Note 7, “Equity and Long-term Incentive Compensation Plans”.
Starting in fiscal year ended June 30, 2013, we adopted a cash-based long-term incentive (“Cash LTI”) program for many of our employees as part of our employee compensation program. Cash LTI awards issued to employees under the Cash Long-Term Incentive Plan (“Cash LTI Plan”) generally vest in four equal installments, with 25% of the aggregate amount of the Cash LTI award vesting on each yearly anniversary of the grant date over a four-year period. In order to receive payments under the Cash LTI Plan, participants must remain employed by us as of the applicable award vesting date.
We have agreements with financial institutions to sell certain of our trade receivables and promissory notes from customers without recourse. In addition, we periodically sell certain letters of credit (“LCs”), without recourse, received from customers in payment for goods.
The following table shows total receivables sold under factoring agreements and proceeds from sales of LCs for the indicated periods:
 
Year ended June 30,
(In thousands)
2016
 
2015
 
2014
Receivables sold under factoring agreements
$
205,790

 
$
137,285

 
$
116,292

Proceeds from sales of LCs
$
21,904

 
$
6,920

 
$
8,323

 Factoring and LC fees for the sale of certain trade receivables were recorded in other expense (income), net and were not material for the periods presented.
We maintain guarantee arrangements available through various financial institutions for up to $22.1 million, of which $18.7 million had been issued as of June 30, 2016, primarily to fund guarantees to customs authorities for value-added tax (“VAT”) and other operating requirements of our subsidiaries in Europe and Asia.
We maintain certain open inventory purchase commitments with our suppliers to ensure a smooth and continuous supply for key components. Our liability under these purchase commitments is generally restricted to a forecasted time-horizon as mutually agreed upon between the parties. This forecasted time-horizon can vary among different suppliers. Our open inventory purchase commitments were approximately $292.9 million as of June 30, 2016 and are primarily due within the next 12 months. Actual expenditures will vary based upon the volume of the transactions and length of contractual service provided. In addition, the amounts paid under these arrangements may be less in the event that the arrangements are renegotiated or canceled. Certain agreements provide for potential cancellation penalties.
We provide standard warranty coverage on our systems for 40 hours per week for 12 months, providing labor and parts necessary to repair the systems during the warranty period. We account for the estimated warranty cost as a charge to costs of revenues when revenue is recognized. The estimated warranty cost is based on historical product performance and field expenses. The actual product performance and/or field expense profiles may differ, and in those cases we adjust our warranty accruals accordingly. The difference between the estimated and actual warranty costs tends to be larger for new product introductions as there is limited historical product performance to estimate warranty expense; our warranty charge estimates for more mature products with longer product performance histories tend to be more stable. Non-standard warranty coverage generally includes services incremental to the standard 40-hours per week coverage for 12 months. See Note 12, “Commitments and Contingencies” to the Consolidated Financial Statements for additional details.

57

Table of Contents

Working Capital:
Working capital was $2.87 billion as of June 30, 2016, which was a decrease of $37.2 million compared to our working capital as of June 30, 2015. As of June 30, 2016, our principal sources of liquidity consisted of $2.49 billion of cash, cash equivalents and marketable securities. Our liquidity is affected by many factors, some of which are based on the normal ongoing operations of the business, and others of which relate to the uncertainties of global and regional economies and the semiconductor and the semiconductor equipment industries. Although cash requirements will fluctuate based on the timing and extent of these factors, we believe that cash generated from operations, together with the liquidity provided by existing cash and cash equivalents balances and our $500 million unfunded revolving credit facility, will be sufficient to satisfy our liquidity requirements associated with working capital needs, capital expenditures, dividends, stock repurchases and other contractual obligations, including repayment of outstanding debt, for at least the next 12 months.
Our credit ratings and outlooks as of June 30, 2016 are summarized below: 
Rating Agency
Rating
 
Outlook
Fitch
BBB-
 
Stable
Moody’s
Baa2
 
Stable
Standard & Poor’s
BBB
 
Stable
Factors that can affect our credit ratings include changes in our operating performance, the economic environment, conditions in the semiconductor and semiconductor equipment industries, our financial position and changes in our business strategy.
Off-Balance Sheet Arrangements
Under our foreign currency risk management strategy, we utilize derivative instruments to protect our earnings and cash flows from unanticipated fluctuations in earnings and cash flows caused by volatility in currency exchange rates. This financial exposure is monitored and managed as an integral part of our overall risk management program, which focuses on the unpredictability of financial markets and seeks to reduce the potentially adverse effects that the volatility of these markets may have on our operating results. We continue our policy of hedging our current and forecasted foreign currency exposures with hedging instruments having tenors of up to 18 months (see Note 15, “Derivative Instruments and Hedging Activities” to the Consolidated Financial Statements for additional details). Our outstanding hedge contracts, with maximum remaining maturities of approximately seven months and 16 months as of June 30, 2016 and 2015, respectively, were as follows: 
 
As of June 30,
(In thousands)
2016
 
2015
Cash flow hedge contracts
 
 
 
Purchase
$
7,591

 
$
32,775

Sell
$
91,793

 
$
88,800

Other foreign currency hedge contracts
 
 
 
Purchase
$
122,275

 
$
64,012

Sell
$
115,087

 
$
123,091


58

Table of Contents

In October 2014, in anticipation of the issuance of the Senior Notes, we entered into a series of forward contracts (“Rate Lock Agreements”) to lock the benchmark rate on a portion of the Senior Notes. The objective of the Rate Lock Agreements was to hedge the risk associated with the variability in interest rates due to the changes in the benchmark rate leading up to the closing of the intended financing, on the notional amount being hedged. The Rate Lock Agreements had a notional amount of $1.00 billion in aggregate which matured in the second quarter of the fiscal year ended June 30, 2015. We designated each of the Rate Lock Agreements as a qualifying hedging instrument and accounted for as a cash flow hedge, under which the effective portion of the gain or loss on the close out of the Rate Lock Agreements was initially recognized in accumulated other comprehensive income (loss) as a reduction of total stockholders’ equity and subsequently amortized into earnings as a component of interest expense over the term of the underlying debt. The ineffective portion, if any, was recognized in earnings immediately. The Rate Lock Agreements were terminated on the date of pricing of the $1.25 billion of 4.650% Senior Notes due in 2024 and we recorded the fair value of $7.5 million as a gain within accumulated other comprehensive income (loss) as of December 31, 2014. For the fiscal years ended June 30, 2016 and 2015, we recognized $0.8 million and $0.5 million, respectively, for the amortization of the gain recognized in accumulated other comprehensive income (loss), which amount reduced the interest expense. As of June 30, 2016, the unamortized portion of the fair value of the forward contracts for the rate lock agreements was $6.3 million. The cash proceeds of $7.5 million from the settlement of the Rate Lock Agreements were included in the cash flows from operating activities in the consolidated statements of cash flows for the fiscal year ended June 30, 2015 because the designated hedged item was classified as interest expense in the cash flows from operating activities in the consolidated statements of cash flows.
In addition, in November 2014, we entered into a non-designated forward contract to lock the treasury rate used to determine the redemption amount of the 2018 Senior Notes that occurred during the three months ended December 31, 2014. The objective of the forward contract was to hedge the risk associated with the variability of the redemption amount due to changes in interest rates through the redemption of the existing 2018 Senior Notes. The forward contract had a notional amount of $750.0 million. The forward contract was terminated in December 2014 and the resulting fair value of $1.2 million was included in the loss on extinguishment of debt and other, net line in the consolidated statements of operations, partially offsetting the loss on redemption of the debt during the three months ended December 31, 2014. The cash proceeds from the forward contract were included in the cash flows from financing activities in the consolidated statements of cash flows for the fiscal year ended June 30, 2015, partially offsetting the cash outflows for the redemption of the 2018 Senior Notes.
Indemnification Obligations. Subject to certain limitations, we are obligated to indemnify our current and former directors, officers and employees with respect to certain litigation matters and investigations that arise in connection with their service to us. These obligations arise under the terms of our certificate of incorporation, our bylaws, applicable contracts, and Delaware and California law. The obligation to indemnify generally means that we are required to pay or reimburse the individuals’ reasonable legal expenses and possibly damages and other liabilities incurred in connection with these matters. For example, we have paid or reimbursed legal expenses incurred in connection with the investigation of our historical stock option practices and the related litigation and government inquiries by a number of our current and former directors, officers and employees. Although the maximum potential amount of future payments we could be required to make under the indemnification obligations generally described in this paragraph is theoretically unlimited, we believe the fair value of this liability, to the extent estimable, is appropriately considered within the reserve we have established for currently pending legal proceedings.
We are a party to a variety of agreements pursuant to which we may be obligated to indemnify the other party with respect to certain matters. Typically, these obligations arise in connection with contracts and license agreements or the sale of assets, under which we customarily agree to hold the other party harmless against losses arising from, or provide customers with other remedies to protect against, bodily injury or damage to personal property caused by our products, non-compliance with our product performance specifications, infringement of third-party intellectual property rights used in our products and a breach of warranties, representations and covenants related to matters such as title to assets sold, validity of certain intellectual property rights, non-infringement of third-party rights, and certain income tax-related matters. In each of these circumstances, payment by us is typically subject to the other party making a claim to and cooperating with us pursuant to the procedures specified in the particular contract. This usually allows us to challenge the other party’s claims or, in case of breach of intellectual property representations or covenants, to control the defense or settlement of any third-party claims brought against the other party. Further, our obligations under these agreements may be limited in terms of amounts, activity (typically at our option to replace or correct the products or terminate the agreement with a refund to the other party), and duration. In some instances, we may have recourse against third parties and/or insurance covering certain payments made by us.

59

Table of Contents

In addition, we may in limited circumstances enter into agreements that contain customer-specific commitments on pricing, tool reliability, spare parts stocking levels, service response time and other commitments. Furthermore, we may give these customers limited audit or inspection rights to enable them to confirm that we are complying with these commitments. If a customer elects to exercise its audit or inspection rights, we may be required to expend significant resources to support the audit or inspection, as well as to defend or settle any dispute with a customer that could potentially arise out of such audit or inspection. To date, we have made no accruals in our consolidated financial statements for this contingency. While we have not in the past incurred significant expenses for resolving disputes regarding these types of commitments, we cannot make any assurance that we will not incur any such liabilities in the future.
It is not possible to predict the maximum potential amount of future payments under these or similar agreements due to the conditional nature of our obligations and the unique facts and circumstances involved in each particular agreement. Historically, payments made by us under these agreements have not had a material effect on our business, financial condition, results of operations or cash flows.

60

Table of Contents

ITEM 7A.
QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
We are exposed to financial market risks, including changes in interest rates, foreign currency exchange rates and marketable equity security prices. To mitigate these risks, we utilize derivative financial instruments, such as foreign currency hedges. All of the potential changes noted below are based on sensitivity analyses performed on our financial position as of June 30, 2016. Actual results may differ materially.
As of June 30, 2016, we had an investment portfolio of fixed income securities of $1.48 billion. These securities, as with all fixed income instruments, are subject to interest rate risk and will decline in value if market interest rates increase. If market interest rates were to increase immediately and uniformly by 100 bps from levels as of June 30, 2016, the fair value of the portfolio would have declined by $16.5 million.
In November 2014, we issued $2.50 billion aggregate principal amount of fixed rate senior, unsecured long-term notes (collectively referred to as “Senior Notes”) due in various fiscal years ranging from 2018 to 2035. The fair market value of long-term fixed interest rate notes is subject to interest rate risk. Generally, the fair market value of fixed interest rate notes will increase as interest rates fall and decrease as interest rates rise. As of June 30, 2016, the fair value and the book value of our Senior Notes were $2.68 billion and $2.50 billion, respectively. Additionally, the interest expense for the Senior Notes is subject to interest rate adjustments following a downgrade of our credit ratings below investment grade by the credit rating agencies. Following a rating change below investment grade, the stated interest rate for each series of Senior Notes may increase between 25 bps to 100 bps based on the adjusted credit rating. Refer to Note 6, “Debt” to the Consolidated Financial Statements in Part II, Item 8 and Management’s Discussion and Analysis of Financial Condition and Results of Operations, “Liquidity and Capital Resources,” in Part II, Item 7 for additional details. Factors that can affect our credit ratings include changes in our operating performance, the economic environment, conditions in the semiconductor and semiconductor equipment industries, our financial position, and changes in our business strategy. As of June 30, 2016, if our credit rating was downgraded below investment grade by Moody’s and S&P, the maximum potential increase to our annual interest expense on the Senior Notes, considering a 200 bps increase to the stated interest rate for each series of our Senior Notes, is estimated to be approximately $53.4 million.

In November 2014, we entered into $750 million aggregate principal amount of floating rate senior, unsecured prepayable term loans due in 2019 and a $500 million unfunded revolving credit facility. The interest rates for the term loans are based on LIBOR plus a fixed spread and this spread is subject to adjustment in conjunction with our credit rating downgrades or upgrades. The spread ranges from 100 bps to 175 bps based on the adjusted credit rating. The fair value of the term loans is subject to interest rate risk only to the extent of the fixed spread portion of the interest rates which does not fluctuate with change in interest rates. As of June 30, 2016, the difference between book value and fair value of our term loans was immaterial. We are also obligated to pay an annual commitment fee of 15 bps on the daily undrawn balance of the unfunded revolving credit facility which is also subject to an adjustment in conjunction with our credit rating downgrades or upgrades. The annual commitment fee ranges from 10 bps to 25 bps on the daily undrawn balance of the revolving credit facility, depending upon the then effective credit rating. As of June 30, 2016, if LIBOR-based interest rates increased by 100 bps, the change would increase our annual interest expense annually by approximately $5.2 million as it relates to our borrowings under the term loans. Additionally, as of June 30, 2016, if our credit rating was downgraded to be below investment grade, the maximum potential increase to our annual interest expense for the term loans and the revolving credit facility, using the highest range of the ranges discussed above, is estimated to be approximately $3.4 million.
See Note 4, “Marketable Securities” to the Consolidated Financial Statements in Part II, Item 8; Management’s Discussion and Analysis of Financial Condition and Results of Operations, “Liquidity and Capital Resources,” in Part II, Item 7; and Risk Factors in Part I, Item 1A of this Annual Report on Form 10-K for a description of recent market events that may affect the value of the investments in our portfolio that we held as of June 30, 2016.
As of June 30, 2016, we had net forward and option contracts to sell $77.0 million in foreign currency in order to hedge certain currency exposures (see Note 15, “Derivative Instruments and Hedging Activities” to the Consolidated Financial Statements for additional details). If we had entered into these contracts on June 30, 2016, the U.S. dollar equivalent would have been $87.6 million. A 10% adverse move in all currency exchange rates affecting the contracts would decrease the fair value of the contracts by $21.1 million. However, if this occurred, the fair value of the underlying exposures hedged by the contracts would increase by a similar amount. Accordingly, we believe that, as a result of the hedging of certain of our foreign currency exposure, changes in most relevant foreign currency exchange rates should have no material impact on our income or cash flows.

61

Table of Contents

ITEM 8.
FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
 
 
 
 
 
 
 
 
 
 
 
 
 

62

Table of Contents

KLA-TENCOR CORPORATION
Consolidated Balance Sheets
 
 
As of June 30,
(In thousands, except par value)
2016
 
2015
ASSETS
 
 
 
Current assets:
 
 
 
Cash and cash equivalents
$
1,108,488

 
$
838,025

Marketable securities
1,382,806

 
1,549,086

Accounts receivable, net
613,233

 
585,494

Inventories
698,635

 
617,904

Deferred income taxes

 
236,253

Other current assets
64,870

 
77,814

Total current assets
3,868,032

 
3,904,576

Land, property and equipment, net
278,014

 
314,591

Goodwill
335,177

 
335,263

Deferred income taxes, non-current
302,219

 
78,648

Purchased intangibles, net
4,331

 
11,895

Other non-current assets
174,659

 
181,039

Total assets
$
4,962,432

 
$
4,826,012

LIABILITIES AND STOCKHOLDERS’ EQUITY
 
 
 
Current liabilities:
 
 
 
Accounts payable
$
106,517

 
$
103,342

Deferred system profit
174,551

 
148,691

Unearned revenue
59,147

 
71,335

Current portion of long-term debt

 
16,981

Other current liabilities
662,208

 
661,414

Total current liabilities
1,002,423

 
1,001,763

Non-current liabilities:
 
 
 
Long-term debt
3,057,936

 
3,173,435

Unearned revenue
56,336

 
47,145

Other non-current liabilities
156,623

 
182,230

Total liabilities
4,273,318

 
4,404,573

Commitments and contingencies (Notes 12 and 13)

 

Stockholders’ equity:
 
 
 
Preferred stock, $0.001 par value, 1,000 shares authorized, none outstanding

 

Common stock, $0.001 par value, 500,000 shares authorized, 260,619 and 259,007 shares issued, 155,955 and 157,851 shares outstanding, as of June 30, 2016 and June 30, 2015, respectively
156

 
158

Capital in excess of par value
452,818

 
474,216

Retained earnings (accumulated deficit)
284,825

 
(12,362
)
Accumulated other comprehensive income (loss)
(48,685
)
 
(40,573
)
Total stockholders’ equity
689,114

 
421,439

Total liabilities and stockholders’ equity
$
4,962,432

 
$
4,826,012

See accompanying notes to consolidated financial statements.

63

Table of Contents

KLA-TENCOR CORPORATION
Consolidated Statements of Operations
 
 
Year ended June 30,
(In thousands, except per share amounts)
2016
 
2015
 
2014
Revenues:
 
 
 
 
 
Product
$
2,250,260

 
$
2,125,396

 
$
2,286,437

Service
734,233

 
688,653

 
642,971

Total revenues
2,984,493

 
2,814,049

 
2,929,408

Costs and expenses:
 
 
 
 
 
Costs of revenues
1,163,391

 
1,215,229

 
1,232,962

Research and development
481,258

 
530,616

 
539,469

Selling, general and administrative
379,399

 
406,864

 
384,907

Loss on extinguishment of debt and other, net

 
131,669

 

Interest expense
122,887

 
106,009

 
53,812

Other expense (income), net
(20,634
)
 
(10,469
)
 
(16,203
)
Income before income taxes
858,192

 
434,131

 
734,461

Provision for income taxes
153,770

 
67,973

 
151,706

Net income
$
704,422

 
$
366,158

 
$
582,755

Net income per share:
 
 
 
 
 
Basic
$
4.52

 
$
2.26

 
$
3.51

Diluted
$
4.49

 
$
2.24

 
$
3.47

Cash dividends declared per share (including a special
cash dividend of $16.50 per share declared during the three
months ended December 31, 2014)
$
2.08

 
$
18.50

 
$
1.80

Weighted-average number of shares:
 
 
 
 
 
Basic
155,869

 
162,282

 
166,016

Diluted
156,779

 
163,701

 
168,118


See accompanying notes to consolidated financial statements.

64

Table of Contents

KLA-TENCOR CORPORATION
Consolidated Statements of Comprehensive Income

 
Year ended June 30,
(In thousands)
2016
 
2015
 
2014
Net income
$
704,422

 
$
366,158

 
$
582,755

Other comprehensive income (loss):
 
 
 
 
 
Currency translation adjustments:
 
 
 
 
 
Change in currency translation adjustments
(3,898
)
 
(20,740
)
 
6,428

Change in income tax benefit or expense
1,399

 
8,086

 
(1,232
)
Net change related to currency translation adjustments
(2,499
)
 
(12,654
)
 
5,196

Cash flow hedges:
 
 
 
 
 
Change in net unrealized gains or losses
(9,622
)
 
13,745

 
1,641

Reclassification adjustments for net gains or losses included in net income
3,722

 
(6,615
)
 
(4,145
)
Change in income tax benefit or expense
2,122

 
(2,565
)
 
898

Net change related to cash flow hedges
(3,778
)
 
4,565

 
(1,606
)
Net change related to unrecognized losses and transition obligations in connection with defined benefit plans
(4,552
)
 
(147
)
 
(617
)
Available-for-sale securities:
 
 
 
 
 
Change in net unrealized gains or losses
3,549

 
(1,069
)
 
7,212

Reclassification adjustments for net gains or losses included in net income
(312
)
 
(2,119
)
 
(2,084
)
Change in income tax benefit or expense
(520
)
 
1,122

 
(1,726
)
Net change related to available-for-sale securities
2,717

 
(2,066
)
 
3,402

Other comprehensive income (loss)
(8,112
)
 
(10,302
)
 
6,375

Total comprehensive income
$
696,310

 
$
355,856

 
$
589,130

See accompanying notes to consolidated financial statements.


65

Table of Contents

KLA-TENCOR CORPORATION
Consolidated Statements of Stockholders’ Equity
 
Common Stock and
Capital in Excess of
Par Value
 
Retained
Earnings
(Accumulated Deficit)
 
Accumulated
Other
Comprehensive
Income (Loss)
 
Total
Stockholders’
Equity
(In thousands, except per share amounts)
Shares
 
Amount
 
Balances as of June 30, 2013
165,435

 
$
1,159,565

 
$
2,359,233

 
$
(36,646
)
 
$
3,482,152

Net income

 

 
582,755

 

 
582,755

Other comprehensive income

 

 

 
6,375

 
6,375

Net issuance under employee stock plans
3,848

 
60,320

 

 

 
60,320

Repurchase of common stock
(3,835
)
 
(76,839
)
 
(164,004
)
 

 
(240,843
)
Cash dividends declared ($1.80 per share)

 

 
(298,871
)
 

 
(298,871
)
Stock-based compensation expense

 
60,940

 

 

 
60,940

Tax benefit for equity awards

 
16,518

 

 

 
16,518

Balances as of June 30, 2014
165,448

 
1,220,504

 
2,479,113

 
(30,271
)
 
3,669,346

Net income

 

 
366,158

 

 
366,158

Other comprehensive loss

 

 

 
(10,302
)
 
(10,302
)
Net issuance under employee stock plans
1,658

 
16,186

 

 

 
16,186

Repurchase of common stock
(9,255
)
 
(26,891
)
 
(581,965
)
 

 
(608,856
)
Cash dividends ($18.50 per share including a special cash dividend of $16.50 per share declared during the three months ended December 31, 2014) and dividend equivalents declared

 
(807,391
)
 
(2,275,668
)
 

 
(3,083,059
)
Stock-based compensation expense

 
55,302

 

 

 
55,302

Tax benefit for equity awards

 
16,664

 

 

 
16,664

Balances as of June 30, 2015
157,851

 
474,374

 
(12,362
)
 
(40,573
)
 
421,439

Net income

 

 
704,422

 

 
704,422

Other comprehensive loss

 

 

 
(8,112
)
 
(8,112
)
Net issuance under employee stock plans
1,589

 
14,354

 

 

 
14,354

Repurchase of common stock
(3,445
)
 
(10,049
)
 
(165,694
)
 

 
(175,743
)
Cash dividends ($2.08 per share) and dividend equivalents declared

 
(82,295
)
 
(241,541
)
 

 
(323,836
)
Stock-based compensation expense

 
45,050

 

 

 
45,050

Tax benefit for equity awards

 
11,540

 

 

 
11,540

Balances as of June 30, 2016
155,995

 
$
452,974

 
$
284,825

 
$
(48,685
)
 
$
689,114

See accompanying notes to consolidated financial statements.

66

Table of Contents

KLA-TENCOR CORPORATION
Consolidated Statements of Cash Flows
 
Year Ended June 30,
(In thousands)
2016
 
2015
 
2014
Cash flows from operating activities:
 
 
 
 
 
Net income
$
704,422

 
$
366,158

 
$
582,755

Adjustments to reconcile net income to net cash provided by operating activities:
 
 
 
 
 
Depreciation and amortization
66,932

 
80,536

 
83,072

Asset impairment charges
1,396

 
2,126

 
1,374

Loss on extinguishment of debt and other, net

 
131,669

 

Non-cash stock-based compensation expense
45,050

 
55,302

 
60,940

Deferred income taxes
19,804

 
(24,245
)
 
17,176

Excess tax benefit from equity awards
(11,936
)
 
(15,403
)
 
(20,554
)
Net gain on sale of marketable securities and other investments
(5,887
)
 
(2,119
)
 
(5,920
)
Changes in assets and liabilities, net of impact of acquisition of business:
 
 
 
 
 
Decrease (increase) in accounts receivable, net
(8,292
)
 
(118,520
)
 
32,591

Decrease (increase) in inventories
(67,579
)
 
27,500

 
(26,173
)
Decrease (increase) in other assets
14,613

 
11,135

 
(26,265
)
Increase (decrease) in accounts payable
3,109

 
848

 
(12,333
)
Increase (decrease) in deferred system profit
25,860

 
768

 
(10,042
)
Increase (decrease) in other liabilities
(27,796
)
 
90,151

 
102,265

Net cash provided by operating activities
759,696

 
605,906

 
778,886

Cash flows from investing activities:
 
 
 
 
 
Acquisition of non-marketable securities

 

 
(1,345
)
Acquisition of business

 

 
(18,000
)
Capital expenditures, net
(31,741
)
 
(45,791
)
 
(67,502
)
Proceeds from sale of assets
7,076

 

 
3,836

Purchases of available-for-sale securities
(1,175,720
)
 
(1,731,551
)
 
(1,834,223
)
Proceeds from sale of available-for-sale securities
737,817

 
1,993,396

 
987,512

Proceeds from maturity of available-for-sale securities
602,446

 
699,108

 
251,876

Purchases of trading securities
(68,378
)
 
(60,808
)
 
(64,053
)
Proceeds from sale of trading securities
73,187

 
63,867

 
65,790

Net cash provided by (used in) investing activities
144,687

 
918,221

 
(676,109
)
Cash flows from financing activities:
 
 
 
 
 
Proceeds from issuance of debt, net of issuance costs

 
3,224,906

 

Repayment of debt
(135,000
)
 
(916,117
)
 

Issuance of common stock
38,298

 
47,008

 
112,221

Tax withholding payments related to vested and released restricted stock units
(23,942
)
 
(30,229
)
 
(51,948
)
Common stock repurchases
(181,711
)
 
(602,888
)
 
(240,843
)
Payment of dividends to stockholders
(346,283
)
 
(3,041,055
)
 
(298,871
)
Excess tax benefit from equity awards
11,936

 
15,403

 
20,554

Net cash used in financing activities
(636,702
)
 
(1,302,972
)
 
(458,887
)
Effect of exchange rate changes on cash and cash equivalents
2,782

 
(13,991
)
 
1,581

Net increase (decrease) in cash and cash equivalents
270,463

 
207,164

 
(354,529
)
Cash and cash equivalents at beginning of period
838,025

 
630,861

 
985,390

Cash and cash equivalents at end of period
$
1,108,488

 
$
838,025

 
$
630,861

Supplemental cash flow disclosures:
 
 
 
 
 
Income taxes paid, net
$
105,187

 
$
69,681

 
$
117,348

Interest paid
$
120,433

 
$
92,982

 
$
52,474

Non-cash activities:
 
 
 
 
 
Purchase of land, property and equipment - investing activities
$
2,035

 
$
1,843

 
$
3,457

Unsettled common stock repurchase - financing activities
$

 
$
5,968

 
$

Dividends payable - financing activities
$
19,556

 
$
42,002

 
$

See accompanying notes to consolidated financial statements.

67

Table of Contents

KLA-TENCOR CORPORATION
Notes to Consolidated Financial Statements
NOTE 1— DESCRIPTION OF BUSINESS AND SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES
Description of Business and Principles of Consolidation. KLA-Tencor Corporation (“KLA-Tencor” or the “Company”) is a leading supplier of process control and yield management solutions for the semiconductor and related nanoelectronics industries. KLA-Tencor’s broad portfolio of inspection and metrology products, and related service, software and other offerings primarily supports integrated circuit, which is referred to as an “IC” or “chip,” manufacturers throughout the entire semiconductor fabrication process, from research and development to final volume production. KLA-Tencor provides leading-edge equipment, software and support that enable IC manufacturers to identify, resolve and manage significant advanced technology manufacturing process challenges and obtain higher finished product yields at lower overall cost. In addition to serving the semiconductor industry, KLA-Tencor also provides a range of technology solutions to a number of other high technology industries, including the LED and data storage industries, as well as general materials research. Headquartered in Milpitas, California, KLA-Tencor has subsidiaries both in the United States and in key markets throughout the world.
The Consolidated Financial Statements include the accounts of KLA-Tencor and its majority-owned subsidiaries. All significant intercompany balances and transactions have been eliminated.
Merger Agreement. On October 20, 2015, the Company entered into an Agreement and Plan of Merger and Reorganization (the “Merger Agreement”) with Lam Research Corporation (“Lam Research”), under which KLA-Tencor will, subject to the satisfaction or waiver of the conditions therein, ultimately become a direct or indirect wholly-owned subsidiary of Lam Research through a merger with a subsidiary of Lam Research (the “Merger”).
In accordance with the Merger Agreement, at the effective time of the Merger, each of the Company’s stockholders may elect to receive, for all shares of the Company’s common stock held at the closing of the transaction, and on a per share basis, one of the following: (i) mixed consideration, consisting of both 0.5 of a share of Lam Research common stock and $32.00 in cash; (ii) all-stock consideration, consisting of a number of shares of Lam Research common stock equal to 0.5 plus $32.00 divided by the volume weighted average price of Lam Research common stock over a five trading day period ending shortly before the closing of the transaction (“the five day VWAP”); or (iii) all-cash consideration, consisting of $32.00 plus 0.5 times the five-day VWAP. If no election was made by the Company’s stockholders, they will be deemed to have elected the mixed consideration. All-cash and all-stock elections will be subject to proration in accordance with the terms of the Merger Agreement.
The completion of the transaction is subject to customary closing conditions, including receipt of required regulatory approvals. On February 19, 2016, the Merger Agreement was adopted by KLA-Tencor’s stockholders and Lam Research’s stockholders approved the issuance of Lam Research’s common stock in the Merger.
The Merger Agreement contains certain termination rights for both the Company and Lam Research, including if a governmental body prohibits the Merger or if the Merger is not consummated by October 20, 2016. Upon termination of the Merger Agreement under specified circumstances, the Company or Lam Research may be required to pay the other party a termination fee of $290.0 million. During the fiscal year ended June 30, 2016, the Company incurred merger-related costs of $18.2 million of which $0.7 million was recorded within costs of revenues, $1.7 million was recorded within research and development and $15.8 million was recorded within selling, general and administrative in the Consolidated Statements of Operations.
Management Estimates. The preparation of the Consolidated Financial Statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions in applying the Company’s accounting policies that affect the reported amounts of assets and liabilities (and related disclosure of contingent assets and liabilities) at the date of the Consolidated Financial Statements and the reported amounts of revenues and expenses during the reporting periods. Actual results could differ from those estimates.

68

Table of Contents

Cash Equivalents and Marketable Securities. All highly liquid debt instruments with original or remaining maturities of less than three months at the date of purchase are considered to be cash equivalents. Marketable securities are generally classified as available-for-sale for use in current operations, if required, and are reported at fair value, with unrealized gains and losses, net of tax, presented as a separate component of stockholders’ equity under the caption “Accumulated other comprehensive income (loss).” All realized gains and losses and unrealized losses resulting from declines in fair value that are other than temporary are recorded in earnings in the period of occurrence. The specific identification method is used to determine the realized gains and losses on investments. For all investments in debt and equity securities, the Company assesses whether the impairment is other than temporary. If the fair value of a debt security is less than its amortized cost basis, an impairment is considered other than temporary if (i) the Company has the intent to sell the security or it is more likely than not that the Company will be required to sell the security before recovery of its entire amortized cost basis, or (ii) the Company does not expect to recover the entire amortized cost of the security. If an impairment is considered other than temporary based on condition (i), the entire difference between the amortized cost and the fair value of the security is recognized in earnings. If an impairment is considered other than temporary based on condition (ii), the amount representing credit losses, defined as the difference between the present value of the cash flows expected to be collected and the amortized cost basis of the debt security, will be recognized in earnings, and the amount relating to all other factors will be recognized in other comprehensive income (loss). The Company evaluates both qualitative and quantitative factors such as duration and severity of the unrealized losses, credit ratings, default and loss rates of the underlying collateral, structure and credit enhancements to determine if a credit loss may exist.
Non-Marketable Equity Securities and Other Investments. KLA-Tencor acquires certain equity investments for the promotion of business and strategic objectives, and, to the extent these investments continue to have strategic value, the Company typically does not attempt to reduce or eliminate the inherent market risks. Non-marketable equity securities and other investments are recorded at historical cost. Non-marketable equity securities and other investments are included in “Other non-current assets” on the balance sheet. Non-marketable equity securities are subject to a periodic impairment review; however, there are no open-market valuations, and the impairment analysis requires significant judgment. This analysis includes assessment of the investee’s financial condition, the business outlook for its products and technology, its projected results and cash flow, the likelihood of obtaining subsequent rounds of financing and the impact of any relevant contractual equity preferences held by the Company or others.
Variable Interest Entities. KLA-Tencor uses a qualitative approach in assessing the consolidation requirement for variable interest entities. The approach focuses on identifying which enterprise has the power to direct the activities that most significantly impact the variable interest entity’s economic performance and which enterprise has the obligation to absorb losses or the right to receive benefits from the variable interest entity. In the event that the Company is the primary beneficiary of a variable interest entity, the assets, liabilities, and results of operations of the variable interest entity will be included in the Company’s Consolidated Financial Statements. The Company has concluded that none of the Company’s equity investments require consolidation as per the Company’s most recent qualitative assessment.
Inventories. Inventories are stated at the lower of cost (on a first-in, first-out basis) or market. Demonstration units are stated at their manufacturing cost and written down to their net realizable value. The Company reviews and sets standard costs semi-annually at current manufacturing costs in order to approximate actual costs. The Company’s manufacturing overhead standards for product costs are calculated assuming full absorption of forecasted spending over projected volumes, adjusted for excess capacity. Abnormal inventory costs such as costs of idle facilities, excess freight and handling costs, and spoilage are recognized as current period charges. The Company writes down product inventory based on forecasted demand and technological obsolescence and service spare parts inventory based on forecasted usage. These factors are impacted by market and economic conditions, technology changes, new product introductions and changes in strategic direction and require estimates that may include uncertain elements. Actual demand may differ from forecasted demand, and such differences may have a material effect on recorded inventory values.
Allowance for Doubtful Accounts. A majority of the Company’s trade receivables are derived from sales to large multinational semiconductor manufacturers throughout the world. In order to monitor potential credit losses, the Company performs ongoing credit evaluations of its customers’ financial condition. An allowance for doubtful accounts is maintained for probable credit losses based upon the Company’s assessment of the expected collectibility of the accounts receivable. The allowance for doubtful accounts is reviewed on a quarterly basis to assess the adequacy of the allowance.

69

Table of Contents

Property and Equipment. Property and equipment are recorded at cost, net of accumulated depreciation. Depreciation of property and equipment is based on the straight-line method over the estimated useful lives of the assets. The following table sets forth the estimated useful life for various asset categories:
Asset Category
Range of Useful Lives
Buildings
30 to 35 years
Leasehold improvements
Shorter of 15 years or lease term
Machinery and equipment
2 to 5 years
Office furniture and fixtures
5 to 7 years
Construction-in-process assets are not depreciated until the assets are placed in service. Depreciation expense for the fiscal years ended June 30, 2016, 2015 and 2014 was $52.6 million, $55.8 million and $51.1 million, respectively.
Goodwill and Intangible Assets. KLA-Tencor assesses goodwill for impairment annually as well as whenever events or changes in circumstances indicate that the carrying value may not be recoverable. Long-lived intangible assets are tested for impairment whenever events or changes in circumstances indicate that their carrying amounts may not be recoverable. See Note 5, “Goodwill and Purchased Intangible Assets” for additional details.
Impairment of Long-Lived Assets. KLA-Tencor evaluates the carrying value of its long-lived assets whenever events or changes in circumstances indicate that the carrying value of the asset may be impaired. An impairment loss is recognized when estimated future cash flows expected to result from the use of the asset, including disposition, are less than the carrying value of the asset. Such an impairment charge would be measured as the excess of the carrying value of the asset over its fair value.
Concentration of Credit Risk. Financial instruments that potentially subject KLA-Tencor to significant concentrations of credit risk consist primarily of cash equivalents, short-term marketable securities, trade accounts receivable and derivative financial instruments used in hedging activities. The Company invests in a variety of financial instruments, such as, but not limited to, certificates of deposit, corporate debt and municipal securities, United States Treasury and Government agency securities, and equity securities and, by policy, limits the amount of credit exposure with any one financial institution or commercial issuer. The Company has not experienced any material credit losses on its investments.
A majority of the Company’s trade receivables are derived from sales to large multinational semiconductor manufacturers located throughout the world, with a majority located in Asia. In recent years, the Company’s customer base has become increasingly concentrated due to corporate consolidations, acquisitions and business closures, and to the extent that these customers experience liquidity issues in the future, the Company may be required to incur additional bad debt expense with respect to trade receivables. The Company performs ongoing credit evaluations of its customers’ financial condition and generally requires no collateral to secure accounts receivable. The Company maintains an allowance for potential credit losses based upon expected collectibility risk of all accounts receivable. In addition, the Company may utilize letters of credit or non-recourse factoring to mitigate credit risk when considered appropriate.
The Company is exposed to credit loss in the event of non-performance by counterparties on the foreign exchange contracts that the Company uses in hedging activities and in certain factoring transactions. These counterparties are large international financial institutions, and to date no such counterparty has failed to meet its financial obligations to the Company under such contracts.
The following customers each accounted for more than 10% of total revenues for the indicated periods:
Year ended June 30,
2016
 
2015
 
2014
Micron Technology, Inc.
 
Intel Corporation
 
Intel Corporation
Taiwan Semiconductor Manufacturing Company Limited
 
Samsung Electronics Co., Ltd.
 
Samsung Electronics Co., Ltd.

 
Taiwan Semiconductor Manufacturing Company Limited
 
Taiwan Semiconductor Manufacturing Company Limited

70

Table of Contents

The following customers each accounted for more than 10% of net accounts receivable as of the dates indicated below:
As of June 30,
2016
 
2015
SK Hynix, Inc.
 
Taiwan Semiconductor Manufacturing Company Limited
Taiwan Semiconductor Manufacturing Company Limited
 
 
Foreign Currency. The functional currencies of KLA-Tencor’s foreign subsidiaries are the local currencies, except as described below. Accordingly, all assets and liabilities of these foreign operations are translated to U.S. dollars at current period end exchange rates, and revenues and expenses are translated to U.S. dollars using average exchange rates in effect during the period. The gains and losses from foreign currency translation of these subsidiaries’ financial statements are recorded directly into a separate component of stockholders’ equity under the caption “Accumulated other comprehensive income (loss).”
The Company’s manufacturing subsidiaries in Singapore, Israel, Germany and China use the U.S. dollar as their functional currency. Accordingly, monetary assets and liabilities in non-functional currency of these subsidiaries are remeasured using exchange rates in effect at the end of the period. Revenues and costs in local currency are remeasured using average exchange rates for the period, except for costs related to those balance sheet items that are remeasured using historical exchange rates. The resulting remeasurement gains and losses are included in the Consolidated Statements of Operations as incurred.
Derivative Financial Instruments. KLA-Tencor uses financial instruments, such as forward exchange contracts and currency options, to hedge a portion of, but not all, existing and forecasted foreign currency denominated transactions. The purpose of the Company’s foreign currency program is to manage the effect of exchange rate fluctuations on certain foreign currency denominated revenues, costs and eventual cash flows. The effect of exchange rate changes on forward exchange contracts is expected to offset the effect of exchange rate changes on the underlying hedged items. The Company believes these financial instruments do not subject the Company to speculative risk that would otherwise result from changes in currency exchange rates.
All of the Company’s derivative financial instruments are recorded at fair value based upon quoted market prices for comparable instruments adjusted for risk of counterparty non-performance. For derivative instruments designated and qualifying as cash flow hedges of forecasted foreign currency denominated transactions expected to occur within twelve months, the effective portion of the gain or loss on these hedges is reported as a component of “Accumulated other comprehensive income (loss)” in stockholders’ equity, and is reclassified into earnings when the hedged transaction affects earnings. If the transaction being hedged fails to occur, or if a portion of any derivative is (or becomes) ineffective, the gain or loss on the associated financial instrument is recorded immediately in earnings. For derivative instruments used to hedge existing foreign currency denominated assets or liabilities, the gains or losses on these hedges are recorded immediately in earnings to offset the changes in the fair value of the assets or liabilities being hedged.
Warranty. The Company provides standard warranty coverage on its systems for 40 hours per week for 12 months, providing labor and parts necessary to repair the systems during the warranty period. The Company accounts for the estimated warranty cost as a charge to costs of revenues when revenue is recognized. The estimated warranty cost is based on historical product performance and field expenses. Utilizing actual service records, the Company calculates the average service hours and parts expense per system and applies the actual labor and overhead rates to determine the estimated warranty charge. The Company updates these estimated charges on a regular basis. The actual product performance and/or field expense profiles may differ, and in those cases the Company adjusts its warranty accruals accordingly (see Note 12, “Commitments and Contingencies”).

71

Table of Contents

Revenue Recognition. The Company recognizes revenue when persuasive evidence of an arrangement exists, delivery has occurred or services have been rendered, the selling price is fixed or determinable, and collectibility is reasonably assured. The Company derives revenue from three sources—sales of systems, spare parts and services. In general, the Company recognizes revenue for systems when the system has been installed, is operating according to predetermined specifications and is accepted by the customer. When the Company has demonstrated a history of successful installation and acceptance, the Company recognizes revenue upon delivery and customer acceptance. Under certain circumstances, however, the Company recognizes revenue prior to acceptance from the customer, as follows:
When the customer fab has previously accepted the same tool, with the same specifications, and when the Company can objectively demonstrate that the tool meets all of the required acceptance criteria.
When system sales to independent distributors have no installation requirement, contain no acceptance agreement, and 100% of the payment is due based upon shipment.
When the installation of the system is deemed perfunctory.
When the customer withholds acceptance due to issues unrelated to product performance, in which case revenue is recognized when the system is performing as intended and meets predetermined specifications.
In circumstances in which the Company recognizes revenue prior to installation, the portion of revenue associated with installation is deferred based on estimated fair value, and that revenue is recognized upon completion of the installation.
In many instances, products are sold in stand-alone arrangements. Services are sold separately through renewals of annual maintenance contracts. The Company has multiple element revenue arrangements in cases where certain elements of a sales arrangement are not delivered and accepted in one reporting period. To determine the relative fair value of each element in a revenue arrangement, the Company allocates arrangement consideration based on the selling price hierarchy. For substantially all of the arrangements with multiple deliverables pertaining to products and services, the Company uses vendor-specific objective evidence (“VSOE”) or third-party evidence (“TPE”) to allocate the selling price to each deliverable. The Company determines TPE based on historical prices charged for products and services when sold on a stand-alone basis. When the Company is unable to establish relative selling price using VSOE or TPE, the Company uses estimated selling price (“ESP”) in its allocation of arrangement consideration. The objective of ESP is to determine the price at which the Company would transact a sale if the product or service were sold on a stand-alone basis. ESP could potentially be used for new or customized products. The Company regularly reviews relative selling prices and maintains internal controls over the establishment and updates of these estimates.
In a multiple element revenue arrangement, the Company defers revenue recognition associated with the relative fair value of each undelivered element until that element is delivered to the customer. To be considered a separate element, the product or service in question must represent a separate unit of accounting, which means that such product or service must fulfill the following criteria: (a) the delivered item(s) has value to the customer on a stand-alone basis; and (b) if the arrangement includes a general right of return relative to the delivered item(s), delivery or performance of the undelivered
item(s) is considered probable and substantially in the control of the Company. If the arrangement does not meet all the above criteria, the entire amount of the sales contract is deferred until all elements are accepted by the customer.
Trade-in rights are occasionally granted to customers to trade in tools in connection with subsequent purchases. The Company estimates the value of the trade-in right and reduces the revenue recognized on the initial sale. This amount is recognized at the earlier of the exercise of the trade-in right or the expiration of the trade-in right.
 Spare parts revenue is recognized when the product has been shipped, risk of loss has passed to the customer and collection of the resulting receivable is probable.
Service and maintenance contract revenue is recognized ratably over the term of the maintenance contract. Revenue from services performed in the absence of a maintenance contract, including consulting and training revenue, is recognized when the related services are performed and collectibility is reasonably assured.
The Company sells stand-alone software that is subject to software revenue recognition guidance. The Company periodically reviews selling prices to determine whether VSOE exists, and in situations where the Company is unable to establish VSOE for undelivered elements such as post-contract service, revenue is recognized ratably over the term of the service contract.
The Company also defers the fair value of non-standard warranty bundled with equipment sales as unearned revenue. Non-standard warranty includes services incremental to the standard 40-hour per week coverage for 12 months. Non-standard warranty is recognized ratably as revenue when the applicable warranty term period commences.

72

Table of Contents

The deferred system profit balance equals the amount of deferred system revenue that was invoiced and due on shipment, less applicable product and warranty costs. Deferred system revenue represents the value of products that have been shipped and billed to customers which have not met the Company’s revenue recognition criteria. Deferred system profit does not include the profit associated with product shipments to certain customers in Japan, to whom title does not transfer until customer acceptance. Shipments to such customers in Japan are classified as inventory at cost until the time of acceptance.
Research and Development Costs. Research and development costs are expensed as incurred.
Shipping and Handling Costs. Shipping and handling costs are included as a component of cost of sales.
Accounting for Stock-Based Compensation Plans. The Company accounts for stock-based awards granted to employees for services based on the fair value of those awards. The fair value of stock-based awards is measured at the grant date and is recognized as expense over the employee’s requisite service period. The fair value for restricted stock units granted without “dividend equivalent” rights is determined using the closing price of the Company’s common stock on the grant date, adjusted to exclude the present value of dividends which are not accrued on the restricted stock units. The fair value for restricted stock units granted with “dividend equivalent” rights is determined using the closing price of the Company’s common stock on the grant date. The award holder is not entitled to receive payments under dividend equivalent rights unless the associated restricted stock unit award vests (i.e., the award holder is entitled to receive credits, payable in cash or shares of the Company’s common stock, equal to the cash dividends that would have been received on the shares of common stock underlying the restricted stock units had the shares been issued and outstanding on the dividend record date, but such dividend equivalents are only paid subject to the recipient satisfying the vesting requirements of the underlying award). The fair value is determined using a Black-Scholes valuation model for purchase rights under the Employee Stock Purchase Plan. The Black-Scholes option-pricing model requires the input of assumptions, including the option’s expected term and the expected price volatility of the underlying stock. The expected stock price volatility assumption is based on the market-based historical implied volatility from traded options of the Company’s common stock. The Company has elected not to include the indirect tax effects of stock-based compensation deductions when calculating the windfall benefits and therefore recognizes the full effect of these deductions in the income statement in the period in which the taxable event occurs.
Accounting for Cash-Based Long-Term Incentive Compensation. Cash-based long-term incentive (“Cash LTI”) awards issued to employees under the Company’s Cash LTI program vest in four equal installments, with 25% of the aggregate amount of the Cash LTI award vesting on each yearly anniversary of the grant date over a four-year period. In order to receive payments under a Cash LTI award, participants must remain employed by the Company as of the applicable award vesting date. Compensation expense related to the Cash LTI awards is recognized over the vesting term, which is adjusted for the impact of estimated forfeitures.
Accounting for Non-qualified Deferred Compensation Plan. The Company has a non-qualified deferred compensation plan (known as “Executive Deferred Savings Plan”) under which certain executives and non-employee directors may defer a portion of their compensation. Participants are credited with returns based on their allocation of their account balances among measurement funds. The Company controls the investment of these funds, and the participants remain general creditors of the Company. The Company invests these funds in certain mutual funds and such investments are classified as trading securities in the consolidated balance sheets. Distributions from the Executive Deferred Savings Plan commence following a participant’s retirement or termination of employment or on a specified date allowed per the Executive Deferred Savings Plan provisions, except in cases where such distributions are required to be delayed in order to avoid a prohibited distribution under Internal Revenue Code Section 409A. Participants can generally elect the distributions to be paid in lump sum or quarterly cash payments over a scheduled period for up to 15 years and are allowed to make subsequent changes to their existing elections as permissible under the Executive Deferred Savings Plan provisions. The liability associated with the Executive Deferred Savings Plan is included as a component of other current liabilities in the consolidated balance sheets. Changes in the Executive Deferred Savings Plan liability is recorded in selling, general and administrative expense in the consolidated statements of operations. The expense (benefit) associated with changes in the liability included in selling, general and administrative expense was $(0.8) million, $10.4 million and $24.4 million for the fiscal years ended June 30, 2016, 2015 and 2014, respectively. The Company also has a deferred compensation asset that corresponds to the liability under the Executive Deferred Savings Plan and it is included as a component of other non-current assets in the consolidated balance sheets. Changes in the Executive Deferred Savings Plan assets are recorded as gains (losses), net in selling, general and administrative expense in the consolidated statements of operations. The amount of net gains included in selling, general and administrative expense were $0.1 million, $10.4 million and $24.8 million for the fiscal years ended June 30, 2016, 2015 and 2014, respectively.

73

Table of Contents

Advertising Expenses. Advertising costs are expensed as incurred.
Income Taxes. The Company accounts for income taxes in accordance with the authoritative guidance, which requires that deferred tax assets and liabilities be recognized using enacted tax rates for the effect of temporary differences between the book and tax bases of recorded assets and liabilities. The guidance also requires that deferred tax assets be reduced by a valuation allowance if it is more likely than not that certain deferred tax asset will not be realized. The Company has determined that a valuation allowance is necessary against certain deferred tax assets, but it anticipates that its future taxable income will be sufficient to recover the remainder of its deferred tax assets. However, should there be a change in the Company’s ability to recover its deferred tax assets that are not subject to a valuation allowance, the Company could be required to record an additional valuation allowance against such deferred tax assets. This would result in an increase to the Company’s tax provision in the period in which the Company determines that the recovery is not probable. During its fiscal year ended 2016, the Company prospectively adopted the accounting standard update for the presentation of deferred income taxes which requires it to classify deferred tax assets and liabilities as noncurrent in a classified balance sheet. See “Recent Accounting Pronouncements” below for additional details.
The Company applies a two-step approach, based on authoritative guidance, to recognizing and measuring uncertain tax positions. The first step is to evaluate the tax position for recognition by determining if the weight of available evidence indicates that it is more likely than not that the position will be sustained in audit, including resolution of related appeals or litigation processes, if any. The second step is to measure the tax benefit as the largest amount that is more than 50% likely of being realized upon ultimate settlement. The Company reevaluates these uncertain tax positions on a quarterly basis. This evaluation is based on factors including, but not limited to, changes in facts or circumstances, changes in tax law, effectively settled issues under audit and new audit activity. Any change in these factors could result in the recognition of a tax benefit or an additional charge to the tax provision.
Net Income Per Share. Basic net income per share is calculated by dividing net income available to common stockholders by the weighted-average number of common shares outstanding during the period. Diluted net income per share is calculated by using the weighted-average number of common shares outstanding during the period increased to include the number of additional shares of common stock that would have been outstanding if the dilutive potential shares of common stock had been issued. The dilutive effect of outstanding options and restricted stock units is reflected in diluted net income per share by application of the treasury stock method. The dilutive securities are excluded from the computation of diluted net loss per share when a net loss is recorded for the period as their effect would be anti-dilutive.
Contingencies and Litigation. The Company is subject to the possibility of losses from various contingencies. Considerable judgment is necessary to estimate the probability and amount of any loss from such contingencies. An accrual is made when it is probable that a liability has been incurred or an asset has been impaired and the amount of loss can be reasonably estimated. The Company accrues a liability and recognizes as expense the estimated costs expected to be incurred over the next twelve months to defend or settle asserted and unasserted claims existing as of the balance sheet date. See Note 12, “Commitments and Contingencies” and Note 13, “Litigation and Other Legal Matters” for additional details.
Reclassifications. Certain reclassifications have been made to prior year financial statements to conform to the current year presentation. The reclassifications had no effect on the Consolidated Statements of Operations, Comprehensive Income, Stockholder’s Equity and Cash Flows.
Recent Accounting Pronouncements
Recently Adopted
In November 2015, the Financial Accounting Standards board (“FASB”) issued an accounting standard update for the presentation of deferred income taxes. Under this new guidance, deferred tax assets and liabilities should be classified as noncurrent in a classified balance sheet. The Company early adopted this accounting standard update on a prospective basis at the beginning of the fourth quarter of the fiscal year ended 2016. Upon adoption, approximately $218 million in net current deferred tax assets were reclassified to noncurrent. No prior periods were retrospectively adjusted.

74

Table of Contents

Updates Not Yet Effective
In May 2014, the FASB issued an accounting standard update regarding revenue from customer contracts to transfer goods and services or non-financial assets unless the contracts are covered by other standards (for example, insurance or lease contracts). Under the new guidance, an entity should recognize revenue in connection with the transfer of promised goods or services to customers in an amount that reflects the consideration that the entity expects to be entitled to receive in exchange for those goods or services. In addition, the new standard requires that reporting companies disclose the nature, amount, timing, and uncertainty of revenue and cash flows arising from contracts with customers. In August 2015, the FASB issued an amendment to defer the effective date of the update by one year, with early adoption on the original effective date permitted. With this amendment, the updates are effective for the Company beginning in the first quarter of the fiscal year ending June 30, 2019, with early adoption permitted beginning in the first quarter of the fiscal year ending June 30, 2018. Subsequent to this amendment, the FASB has issued additional clarifying implementation guidance. The new revenue standard may be applied retrospectively to each prior period presented or retrospectively with the cumulative effect recognized as of the date of adoption. The Company is currently evaluating the impact of this accounting standard update on its consolidated financial statements.
In April 2015, the FASB issued an accounting standard update for customer’s cloud based fees. The guidance changes what a customer must consider in determining whether a cloud computing arrangement contains a software license. If the arrangement contains a software license, the customer would account for the fees related to the software license element in accordance with guidance related to internal use software; if the arrangement does not contain a software license, the customer would account for the arrangement as a service contract. The update is effective for the Company beginning in the first quarter of the Company’s fiscal year ending June 30, 2017. Early adoption is permitted as of the beginning of an interim or annual reporting period. The Company is currently evaluating the impact of this accounting standard update on its consolidated financial statements.
In July 2015, the FASB issued an accounting standard update for the subsequent measurement of inventory. The amended guidance requires entities to measure inventory at the lower of cost or net realizable value. Net realizable value is the estimated selling prices in the ordinary course of business, less reasonably predictable costs of completion, disposal and transportation. The requirement would replace the current lower of cost or market evaluation and the accounting guidance is unchanged for inventory measured using last-in, first-out (“LIFO”) or the retail inventory method. The update is effective for the Company beginning in the first quarter of the Company’s fiscal year ending June 30, 2018 and should be applied prospectively with early adoption permitted as of the beginning of an interim or annual reporting period. The Company is currently evaluating the impact of this accounting standard update on its consolidated financial statements.
In January 2016, the FASB issued an accounting standard update that changes the accounting for financial instruments primarily related to equity investments (other than those accounted for under the equity method of accounting or those that result in consolidation of the investee), financial liabilities under the fair value option, and the presentation and disclosure requirements for financial instruments. The accounting standard update is effective for the Company beginning in the first quarter of its fiscal year ending 2019, and early adoption is permitted. The Company is currently evaluating the impact of this accounting standard update on its consolidated financial statements.
In February 2016, the FASB issued an accounting standard update which amends the existing accounting standards for leases. Consistent with current guidance, the recognition, measurement, and presentation of expenses and cash flows arising from a lease by a lessee primarily will depend on its classification. Under the new guidance, a lessee will be required to recognize assets and liabilities for all leases with lease terms of more than 12 months. The update is effective for the Company beginning in the first quarter of its fiscal year ending June 30, 2020 using a modified retrospective transition method. Early adoption is permitted. The Company is currently evaluating the impact of this accounting standard update on its consolidated financial statements.
In March 2016, the FASB issued an accounting standard update to simplify certain aspects of share-based payment awards to employees, including the accounting for income taxes, an option to recognize gross stock-based compensation expense with actual forfeitures recognized as they occur and statutory tax withholding requirements, as well as certain classifications in the statement of cash flows. The update is effective for the Company beginning in the first quarter of its fiscal year ending June 30, 2018, with early adoption permitted and all of the guidance must be adopted in the same period. The Company is currently evaluating the impact of this accounting standard update on its consolidated financial statements.

75

Table of Contents

In June 2016, the FASB issued an accounting standard update that changes the accounting for recognizing impairments of financial assets. Under the update, credit losses for certain types of financial instruments will be estimated based on expected losses. The update also modifies the impairment models for available-for-sale debt securities and for purchased financial assets with credit deterioration since their origination. The update is effective for the Company beginning in the first quarter of its fiscal year ending June 30, 2021, with early adoption permitted starting in the first quarter of fiscal year ending 2020. The Company is currently evaluating the impact of this accounting standard update on its consolidated financial statements.
NOTE 2 — FAIR VALUE MEASUREMENTS
The Company’s financial assets and liabilities are measured and recorded at fair value, except for certain equity investments in privately-held companies. These equity investments are generally accounted for under the cost method of accounting and are periodically assessed for other-than-temporary impairment when an event or circumstance indicates that an other-than-temporary decline in value may have occurred. The Company’s non-financial assets, such as goodwill, intangible assets, and land, property and equipment, are recorded at cost and are assessed for impairment when an event or circumstance indicates that an other-than-temporary decline in value may have occurred.
Fair Value of Financial Instruments. KLA-Tencor has evaluated the estimated fair value of financial instruments using available market information and valuations as provided by third-party sources. The use of different market assumptions and/or estimation methodologies could have a significant effect on the estimated fair value amounts. The fair value of the Company’s cash equivalents, accounts receivable, accounts payable and other current liabilities approximate their carrying amounts due to the relatively short maturity of these items.
Fair Value Hierarchy. The authoritative guidance for fair value measurements establishes a fair value hierarchy that prioritizes the inputs to valuation techniques used to measure fair value. The hierarchy gives the highest priority to unadjusted quoted prices in active markets for identical assets or liabilities (Level 1 measurements) and the lowest priority to unobservable inputs (Level 3 measurements). The three levels of the fair value hierarchy are described below:
Level 1
  
Valuations based on quoted prices in active markets for identical assets or liabilities that the entity has the ability to access.
 
 
 
Level 2
  
Valuations based on quoted prices for similar assets or liabilities, quoted prices in markets that are not active, or other inputs that are observable or can be corroborated by observable data for substantially the full term of the assets or liabilities.
 
 
 
Level 3
  
Valuations based on inputs that are supported by little or no market activity and that are significant to the fair value of the assets or liabilities.
A financial instrument’s level within the fair value hierarchy is based on the lowest level of any input that is significant to the fair value measurement.
The Company’s financial instruments were classified within Level 1 or Level 2 of the fair value hierarchy as of June 30, 2016, because they were valued using quoted market prices, broker/dealer quotes or alternative pricing sources with reasonable levels of price transparency. As of June 30, 2016, the types of instruments valued based on quoted market prices in active markets included money market funds, U.S. Treasury securities, certain sovereign securities and certain U.S. Government agency securities. Such instruments are generally classified within Level 1 of the fair value hierarchy.
As of June 30, 2016, the types of instruments valued based on other observable inputs included corporate debt securities, municipal securities, certain U.S. Government agency securities and certain sovereign securities. The market inputs used to value these instruments generally consist of market yields, reported trades and broker/dealer quotes. Such instruments are generally classified within Level 2 of the fair value hierarchy.
The principal market in which the Company executes its foreign currency contracts is the institutional market in an over-the-counter environment with a relatively high level of price transparency. The market participants usually are large financial institutions. The Company’s foreign currency contracts’ valuation inputs are based on quoted prices and quoted pricing intervals from public data sources and do not involve management judgment. These contracts are typically classified within Level 2 of the fair value hierarchy.

76

Table of Contents

Financial assets (excluding cash held in operating accounts and time deposits) and liabilities measured at fair value on a recurring basis as of the date indicated below were presented on the Company’s Consolidated Balance Sheet as follows: 
As of June 30, 2016 (In thousands)
Total
 
Quoted Prices in
Active Markets
for Identical
Assets (Level 1)
 
Significant Other
Observable Inputs
(Level 2)
Assets
 
 
 
 
 
Cash equivalents:
 
 
 
 
 
U.S. Treasury securities
$
68,748

 
$
68,748

 
$

Corporate debt securities
20,569

 

 
20,569

Money market and other
626,156

 
626,156

 

Marketable securities:
 
 
 
 
 
U.S. Treasury securities
258,754

 
258,754

 

U.S. Government agency securities
405,705

 
385,731

 
19,974

Municipal securities
5,016

 

 
5,016

Corporate debt securities
657,905

 

 
657,905

Sovereign securities
41,257

 
6,426

 
34,831

Total cash equivalents and marketable securities(1)
2,084,110

 
1,345,815

 
738,295

Other current assets:
 
 
 
 
 
Derivative assets
1,095

 

 
1,095

Other non-current assets:
 
 
 
 
 
Executive Deferred Savings Plan
162,160

 
106,149

 
56,011

Total financial assets(1)
$
2,247,365

 
$
1,451,964

 
$
795,401

Liabilities
 
 
 
 
 
Other current liabilities:
 
 
 
 
 
Derivative liabilities
$
(11,647
)
 
$

 
$
(11,647
)
Total financial liabilities
$
(11,647
)
 
$

 
$
(11,647
)
__________________ 
(1) Excludes cash of $330.1 million held in operating accounts and time deposits of $77.1 million as of June 30, 2016.

77

Table of Contents

Financial assets (excluding cash held in operating accounts and time deposits) and liabilities measured at fair value on a recurring basis as of the date indicated below were presented on the Company’s Consolidated Balance Sheet as follows: 
As of June 30, 2015 (In thousands)
Total
 
Quoted Prices in
Active Markets
for Identical
Assets (Level 1)
 
Significant Other
Observable Inputs
(Level 2)
Assets
 
 
 
 
 
Cash equivalents:
 
 
 
 
 
U.S. Government agency securities
$
7,500

 
$
7,500

 
$

Corporate debt securities
13,099

 

 
13,099

Money market and other
611,385

 
611,385

 

Marketable securities:
 
 
 
 
 
U.S. Treasury securities
275,555

 
275,555

 

U.S. Government agency securities
564,768

 
556,019

 
8,749

Municipal securities
31,816

 

 
31,816

Corporate debt securities
612,862

 

 
612,862

Sovereign securities
57,093

 
8,976

 
48,117

Total cash equivalents and marketable securities(1)
2,174,078

 
1,459,435

 
714,643

Other current assets:
 
 
 
 
 
Derivative assets
3,064

 

 
3,064

Other non-current assets:
 
 
 
 
 
Executive Deferred Savings Plan
165,655

 
91,203

 
74,452

Total financial assets(1)
$
2,342,797

 
$
1,550,638

 
$
792,159

Liabilities
 
 
 
 
 
Other current liabilities:
 
 
 
 
 
Derivative liabilities
$
(3,106
)
 
$

 
$
(3,106
)
Total financial liabilities
$
(3,106
)
 
$

 
$
(3,106
)
__________________ 
(1) Excludes cash of $183.1 million held in operating accounts and time deposits of $29.9 million as of June 30, 2015. 
There were no transfers in and out of Level 1 and Level 2 fair value measurements during the fiscal year ended June 30, 2016 or 2015. The Company did not have any assets or liabilities measured at fair value on a recurring basis within Level 3 fair value measurements as of June 30, 2016 or 2015.

78

Table of Contents

NOTE 3 — FINANCIAL STATEMENT COMPONENTS
Consolidated Balance Sheets
 
As of June 30,
(In thousands)
2016
 
2015
Accounts receivable, net:
 
 
 
Accounts receivable, gross
$
634,905

 
$
607,157

Allowance for doubtful accounts
(21,672
)
 
(21,663
)
 
$
613,233

 
$
585,494

Inventories:
 
 
 
Customer service parts
$
234,712

 
$
209,726

Raw materials
208,689

 
194,218

Work-in-process
187,733

 
156,820

Finished goods
67,501

 
57,140

 
$
698,635

 
$
617,904

Other current assets:
 
 
 
Prepaid expenses
$
37,127

 
$
37,006

Income tax related receivables
18,190

 
32,850

Other current assets
9,553

 
7,958

 
$
64,870

 
$
77,814

Land, property and equipment, net:
 
 
 
Land
$
40,603

 
$
40,397

Buildings and leasehold improvements
313,239

 
316,566

Machinery and equipment
507,378

 
510,642

Office furniture and fixtures
21,737

 
21,411

Construction-in-process
5,286

 
3,152

 
888,243

 
892,168

Less: accumulated depreciation and amortization
(610,229
)
 
(577,577
)
 
$
278,014

 
$
314,591

Other non-current assets:
 
 
 
Executive Deferred Savings Plan
$
162,160

 
$
165,655

Other non-current assets
12,499

 
15,384

 
$
174,659

 
$
181,039

Other current liabilities:
 
 
 
Compensation and benefits
$
224,496

 
$
196,682

Executive Deferred Savings Plan
162,289

 
167,886

Customer credits and advances
81,994

 
93,212

Warranty
34,773

 
36,413

Income taxes payable
27,964

 
15,582

Interest payable
19,395

 
19,395

Other accrued expenses
111,297

 
132,244

 
$
662,208

 
$
661,414

Other non-current liabilities:
 
 
 
Pension liabilities
$
69,418

 
$
55,696

Income taxes payable
50,365

 
69,018

Other non-current liabilities
36,840

 
57,516

 
$
156,623

 
$
182,230




79

Table of Contents

Accumulated Other Comprehensive Income (Loss)
The components of accumulated other comprehensive income (loss) (“OCI”) as of the dates indicated below were as follows:
(In thousands)
Currency Translation Adjustments
 
Unrealized Gains (Losses) on Available-for-Sale Securities
 
Unrealized Gains (Losses) on Cash Flow Hedges
 
Unrealized Gains (Losses) on Defined Benefit Plans
 
Total
Balance as of June 30, 2016
$
(32,424
)
 
$
3,451

 
$
775

 
$
(20,487
)
 
$
(48,685
)
 
 
 
 
 
 
 
 
 
 
Balance as of June 30, 2015
$
(29,925
)
 
$
734

 
$
4,553

 
$
(15,935
)
 
$
(40,573
)
 
 
 
 
 
 
 
 
 
 
The effects on net income of amounts reclassified from accumulated OCI to the Consolidated Statements of Operations for the indicated periods were as follows (in thousands):
 
 
Location in the Consolidated Statements of Operations
 
Year ended June 30,
Accumulated OCI Components
 
 
2016
 
2015
Unrealized gains (losses) on cash flow hedges from foreign exchange and interest rate contracts
 
Revenues
 
$
(2,926
)
 
$
7,615

 
 
Costs of revenues
 
(1,551
)
 
(1,503
)
 
 
Interest expense
 
755

 
503

 
 
Net gains reclassified from accumulated OCI
 
$
(3,722
)
 
$
6,615

 
 
 
 
 
 
 
Unrealized gains (losses) on available-for-sale securities
 
Other expense (income), net
 
$
312

 
$
2,119

The amounts reclassified out of accumulated OCI related to the Company’s defined pension plans, which were recognized as a component of net periodic cost for the fiscal years ended June 30, 2016 and 2015 were $1.4 million and $1.3 million, respectively. For additional details, refer to Note 10, “Employee Benefit Plans.”
Consolidated Statements of Operations
 
Year ended June 30,
(In thousands)
2016
 
2015
 
2014
Other expense (income), net:
 
 
 
 
 
Interest income
$
(14,507
)
 
$
(12,545
)
 
$
(13,555
)
Foreign exchange losses, net
1,235

 
1,764

 
514

Net realized gains on sale of investments
(311
)
 
(2,119
)
 
(2,084
)
Other
(7,051
)
 
2,431

 
(1,078
)
 
$
(20,634
)
 
$
(10,469
)
 
$
(16,203
)

80

Table of Contents

NOTE 4 — MARKETABLE SECURITIES
The amortized cost and fair value of marketable securities as of the dates indicated below were as follows:
As of June 30, 2016 (In thousands)
Amortized
Cost
 
Gross
Unrealized
Gains
 
Gross
Unrealized
Losses
 
Fair Value
U.S. Treasury securities
$
326,321

 
$
1,181

 
$

 
$
327,502

U.S. Government agency securities
404,889

 
830

 
(14
)
 
405,705

Municipal securities
5,014

 
2

 

 
5,016

Corporate debt securities
676,259

 
2,372

 
(157
)
 
678,474

Money market and other
626,156

 

 

 
626,156

Sovereign securities
41,224

 
38

 
(5
)
 
41,257

Subtotal
2,079,863

 
4,423

 
(176
)
 
2,084,110

Add: Time deposits(1)
77,131

 

 

 
77,131

Less: Cash equivalents
778,451

 
1

 
(17
)
 
778,435

Marketable securities
$
1,378,543

 
$
4,422

 
$
(159
)
 
$
1,382,806

 
 
 
 
 
 
 
 
As of June 30, 2015 (In thousands)
Amortized
Cost
 
Gross
Unrealized
Gains
 
Gross
Unrealized
Losses
 
Fair Value
U.S. Treasury securities
$
274,965

 
$
605

 
$
(15
)
 
$
275,555

U.S. Government agency securities
571,843

 
551

 
(126
)
 
572,268

Municipal securities
31,819

 
7

 
(10
)
 
31,816

Corporate debt securities
625,965

 
511

 
(515
)
 
625,961

Money market and other
611,385

 

 

 
611,385

Sovereign securities
57,091

 
33

 
(31
)
 
57,093

Subtotal
2,173,068

 
1,707

 
(697
)
 
2,174,078

Add: Time deposits(1)
29,941

 

 

 
29,941

Less: Cash equivalents
654,933

 

 

 
654,933

Marketable securities
$
1,548,076

 
$
1,707

 
$
(697
)
 
$
1,549,086

__________________ 
(1) Time deposits excluded from fair value measurements. 
KLA-Tencor’s investment portfolio consists of both corporate and government securities that have a maximum maturity of three years. The longer the duration of these securities, the more susceptible they are to changes in market interest rates and bond yields. As yields increase, those securities with a lower yield-at-cost show a mark-to-market unrealized loss. All unrealized losses are due to changes in market interest rates, bond yields and/or credit ratings. The Company believes that it has the ability to realize the full value of all of these investments upon maturity. The following table summarizes the fair value and gross unrealized losses of the Company’s investments that were in an unrealized loss position as of the date indicated below:
As of June 30, 2016 (In thousands)
Fair Value
 
Gross
Unrealized
Losses(1)
Corporate debt securities
$
94,448

 
$
(140
)
U.S. Government agency securities
40,306

 
(14
)
Sovereign securities
19,341

 
(5
)
Total
$
154,095

 
$
(159
)
 __________________ 
(1)
As of June 30, 2016, the amount of total gross unrealized losses related to investments that had been in a continuous loss position for 12 months or more was immaterial.

81

Table of Contents

The contractual maturities of securities classified as available-for-sale, regardless of their classification on the Company’s Consolidated Balance Sheet, as of the date indicated below were as follows:
As of June 30, 2016 (In thousands)
Amortized
Cost
 
Fair Value
Due within one year
$
468,650

 
$
468,985

Due after one year through three years
909,893

 
913,821

 
$
1,378,543

 
$
1,382,806

Actual maturities may differ from contractual maturities because borrowers may have the right to call or prepay obligations with or without call or prepayment penalties. Realized gains on available for sale securities for the fiscal years ended June 30, 2016, 2015 and 2014 were $0.9 million, $2.4 million and $2.2 million, respectively. Realized losses on available for sale securities were immaterial for all years presented.
NOTE 5 — GOODWILL AND PURCHASED INTANGIBLE ASSETS
Goodwill
The following table presents goodwill balances and the movements during the fiscal years ended June 30, 2016 and 2015: 
(In thousands)
 
As of June 30, 2014
$
335,355

Adjustments
(92
)
As of June 30, 2015
335,263

Adjustments
(86
)
As of June 30, 2016
$
335,177

Goodwill represents the excess of the purchase price over the fair value of the net tangible and identifiable intangible assets acquired in prior business combinations. Goodwill is net of accumulated impairment losses of $277.6 million, which were recorded prior to the fiscal year ended June 30, 2014.
The Company has made certain organizational changes and consolidated its product divisions effective in the first quarter of fiscal year ended 2016, in response to changing customer requirements in the industry. As required by the authoritative guidance, when an entity reorganizes its reporting structure in a manner that changes the composition of one or more of its reporting units, goodwill is reassigned to the affected reporting units using a relative fair value allocation approach. The fair value of each reporting unit is compared to the fair value of the business immediately prior to the reorganization. The fair value for the Company’s reporting units was determined using a weighted combination of market-based and income-based approach. The Company had four reporting units as of June 30, 2016: Wafer Inspection, Patterning, Global Service and Support, and Others. Prior to the organizational changes, the Company had four reporting units: Defect Inspection, Metrology, Service and Other. The goodwill balances by reporting units as of June 30, 2016 were as follows:
(In thousands)
 
Wafer Inspection
 
Patterning
 
Others
 
Total
Balance as of June 30, 2015
 
$
332,783

(1) 
$
2,480

(2) 
$

 
$
335,263

Goodwill allocation
 
(51,671
)
(3) 
50,775

(3) 
896

(3) 

Goodwill adjustment
 
(86
)
 

 

 
(86
)
Balance as of June 30, 2016
 
$
281,026

 
$
53,255

 
$
896

 
$
335,177

__________________
(1)
The balance as of June 30, 2015, reflects goodwill for the Defect Inspection reporting unit under the old reporting structure which was renamed as Wafer Inspection under the new reporting structure after certain components were allocated out.
(2)
The balance as of June 30, 2015, reflects goodwill for the Metrology reporting unit under the old reporting structure which was renamed as Patterning under the new reporting structure after certain components were allocated in.
(3)
The reorganization resulted in certain goodwill balances to be reallocated as noted above.
The changes in the gross goodwill balance during the fiscal years ended June 30, 2016 and 2015 resulted from foreign currency translation adjustments.

82

Table of Contents

The Company performed a qualitative assessment of the goodwill by reporting unit as of November 30, 2015 and concluded that it was more likely than not that the fair value of each of the reporting units exceeded its carrying amount. In assessing the qualitative factors, the Company considered the impact of key factors including change in industry and competitive environment, market capitalization, stock price, earnings multiples, budgeted-to-actual revenue performance from prior year, gross margin and cash flow from operating activities. As such, it was not necessary to perform the two-step quantitative goodwill impairment test at that time. In addition, there have been no significant events or circumstances affecting the valuation of goodwill subsequent to the qualitative assessment performed in the second quarter of the fiscal year ended June 30, 2016. The next annual assessment of goodwill by reporting unit is scheduled to be performed in the second quarter of the fiscal year ending June 30, 2017.
Purchased Intangible Assets
The components of purchased intangible assets as of the dates indicated below were as follows:
(In thousands)
 
 
As of June 30, 2016
 
As of June 30, 2015
Category
Range of
Useful Lives
 
Gross
Carrying
Amount
 
Accumulated
Amortization and Impairment
 
Net
Amount
 
Gross
Carrying
Amount
 
Accumulated
Amortization and Impairment
 
Net
Amount
Existing technology
4-7 years
 
$
141,659

 
$
138,160

 
$
3,499

 
$
141,659

 
$
134,664

 
$
6,995

Patents
6-13 years
 
57,648

 
57,648

 

 
57,648

 
56,998

 
650

Trade name/Trademark
4-10 years
 
19,893

 
19,743

 
150

 
19,893

 
18,899

 
994

Customer relationships
6-7 years
 
54,980

 
54,298

 
682

 
54,980

 
51,724

 
3,256

Total
 
 
$
274,180

 
$
269,849

 
$
4,331

 
$
274,180

 
$
262,285

 
$
11,895

Intangible assets are reviewed for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset or asset group may not be recoverable.
For the fiscal years ended June 30, 2016, 2015 and 2014, amortization expense for other intangible assets was $7.6 million, $15.8 million and $16.2 million, respectively. Based on the intangible assets recorded as of June 30, 2016, and assuming no subsequent additions to, or impairment of, the underlying assets, the remaining estimated annual amortization expense is expected to be as follows:
Fiscal year ending June 30:
Amortization
(In thousands)
2017
$
2,806

2018
1,525

Total
$
4,331


83

Table of Contents

NOTE 6 — DEBT
The following table summarizes the debt of the Company as of June 30, 2016 and June 30, 2015:
 
As of June 30, 2016
 
As of June 30, 2015
 
Amount
(in thousands)
 
Effective
Interest Rate
 
Amount
(in thousands)
 
Effective
Interest Rate
Fixed-rate 2.375% Senior notes due on November 1, 2017
$
250,000

 
2.396
%
 
$
250,000

 
2.396
%
Fixed-rate 3.375% Senior notes due on November 1, 2019
250,000

 
3.377
%
 
250,000

 
3.377
%
Fixed-rate 4.125% Senior notes due on November 1, 2021
500,000

 
4.128
%
 
500,000

 
4.128
%
Fixed-rate 4.650% Senior notes due on November 1, 2024(1)
1,250,000

 
4.682
%
 
1,250,000

 
4.682
%
Fixed-rate 5.650% Senior notes due on November 1, 2034
250,000

 
5.670
%
 
250,000

 
5.670
%
Term loans
576,250

 
1.714
%
 
711,250

 
1.498
%
Total debt
3,076,250

 
 
 
3,211,250

 
 
Unamortized discount
(3,312
)
 
 
 
(3,723
)
 
 
Unamortized debt issuance costs
(15,002
)
 
 
 
(17,111
)
 
 
Total debt
$
3,057,936

 
 
 
$
3,190,416

 
 
 
 
 
 
 
 
 
 
Reported as:
 
 
 
 
 
 
 
Current portion of long-term debt
$

 
 
 
$
16,981

 
 
Long-term debt
3,057,936

 
 
 
3,173,435

 
 
Total debt
$
3,057,936

 
 
 
$
3,190,416

 
 
__________________ 
(1)
The effective interest rate disclosed above for this series of Senior Notes excludes the impact of the treasury rate lock hedge discussed below. The effective interest rate including the impact of the treasury rate lock hedge was 4.626%.
As of June 30, 2016, future principal payments for the long-term debt are summarized as follows. There are no scheduled payments for the term loans for the fiscal years ending June 30, 2017 and 2018 since the Company made $117.5 million of principal prepayments as of June 30, 2016.
Fiscal year ending June 30,
Amount
(In thousands)
2017
$

2018
250,000

2019
70,000

2020
756,250

2021

Thereafter
2,000,000

Total payments
$
3,076,250


84

Table of Contents

Senior Notes:
In November 2014, the Company issued $2.50 billion aggregate principal amount of senior, unsecured long-term notes (collectively referred to as “Senior Notes”). The Company issued the Senior Notes as part of the leveraged recapitalization plan under which the proceeds from the Senior Notes in conjunction with the proceeds from the term loans (described below) and cash on hand were used (x) to fund a special cash dividend of $16.50 per share, aggregating to approximately $2.76 billion, (y) to redeem $750.0 million of 2018 Senior Notes, including associated redemption premiums, accrued interest and other fees and expenses and (z) for other general corporate purposes, including repurchases of shares pursuant to the Company’s stock repurchase program. The interest rate specified for each series of the Senior Notes will be subject to adjustments from time to time if Moody’s Investor Service, Inc. (“Moody’s”) or Standard & Poor’s Ratings Services (“S&P”) or, under certain circumstances, a substitute rating agency selected by us as a replacement for Moody’s or S&P, as the case may be (a “Substitute Rating Agency”), downgrades (or subsequently upgrades) its rating assigned to the respective series of Senior Notes such that the adjusted rating is below investment grade. If the adjusted rating of any series of Senior Notes from Moody’s (or, if applicable, any Substitute Rating Agency) is decreased to Ba1, Ba2, Ba3 or B1 or below, the stated interest rate on such series of Senior Notes as noted above will increase by 25 bps, 50 bps, 75 bps or 100 bps, respectively (“bps” refers to Basis Points and 1% is equal to 100 bps). If the rating of any series of Senior Notes from S&P (or, if applicable, any Substitute Rating Agency) with respect to such series of Senior Notes is decreased to BB+, BB, BB- or B+ or below, the stated interest rate on such series of Senior Notes as noted above will increase by 25 bps, 50 bps, 75 bps or 100 bps, respectively. The interest rates on any series of Senior Notes will permanently cease to be subject to any adjustment (notwithstanding any subsequent decrease in the ratings by any of Moody’s, S&P and, if applicable, any Substitute Rating Agency) if such series of Senior Notes becomes rated “Baa1” (or its equivalent) or higher by Moody’s (or, if applicable, any Substitute Rating Agency) and “BBB+” (or its equivalent) or higher by S&P (or, if applicable, any Substitute Rating Agency), or one of those ratings if rated by only one of Moody’s, S&P and, if applicable, any Substitute Rating Agency, in each case with a stable or positive outlook. In October 2014, the Company entered into a series of forward contracts to lock the 10-year treasury rate (“benchmark rate”) on a portion of the Senior Notes with a notional amount of $1.00 billion in aggregate. For additional details, refer to Note 15, “Derivative Instruments and Hedging Activities.”
The original discount on the Senior Notes amounted to $4.0 million and is being amortized over the life of the debt. Interest is payable semi-annually on May 1 and November 1 of each year. The debt indenture (the “Indenture”) includes covenants that limit the Company’s ability to grant liens on its facilities and enter into sale and leaseback transactions, subject to certain allowances under which certain sale and leaseback transactions are not restricted. As of June 30, 2016, the Company was in compliance with all of its covenants under the Indenture associated with the Senior Notes.
In certain circumstances involving a change of control followed by a downgrade of the rating of a series of Senior Notes by at least two of Moody’s, S&P and Fitch Inc., unless the Company has exercised its right to redeem the Senior Notes of such series, the Company will be required to make an offer to repurchase all or, at the holder’s option, any part, of each holder’s Senior Notes of that series pursuant to the offer described below (the “Change of Control Offer”). In the Change of Control Offer, the Company will be required to offer payment in cash equal to 101% of the aggregate principal amount of Senior Notes repurchased plus accrued and unpaid interest, if any, on the Senior Notes repurchased, up to, but not including, the date of repurchase.
Based on the trading prices of the Senior Notes on the applicable dates, the fair value of the Senior Notes as of June 30, 2016 and June 30, 2015 was approximately $2.68 billion and $2.52 billion, respectively. While the Senior Notes are recorded at cost, the fair value of the long-term debt was determined based on quoted prices in markets that are not active; accordingly, the long-term debt is categorized as Level 2 for purposes of the fair value measurement hierarchy.

85

Table of Contents

Credit Facility (Term Loans and Unfunded Revolving Credit Facility):
In November 2014, the Company entered into $750.0 million of five-year senior unsecured prepayable term loans and a $500.0 million unfunded revolving credit facility (collectively, the “Credit Facility”) under the Credit Agreement (the “Credit Agreement”). The interest under the Credit Facility will be payable on the borrowed amounts at the London Interbank Offered Rate (“LIBOR”) plus a spread, which is currently 125 bps, and this spread is subject to adjustment in conjunction with the Company’s credit rating downgrades or upgrades. The spread ranges from 100 bps to 175 bps based on the Company’s then effective credit rating. The Company is also obligated to pay an annual commitment fee of 15 bps on the daily undrawn balance of the revolving credit facility, which is also subject to an adjustment in conjunction with the Company’s credit rating downgrades or upgrades by Moody’s and S&P. The annual commitment fee ranges from 10 bps to 25 bps on the daily undrawn balance of the revolving credit facility, depending upon the then effective credit rating. Principal payments with respect to the term loans will be made on the last day of each calendar quarter, and any unpaid principal balance of the term loans, including accrued interest, shall be payable on November 14, 2019 (the “Maturity Date”). The Company may prepay the term loans and unfunded revolving credit facility at any time without a prepayment penalty. During the fiscal year ended June 30, 2016, we made term loan principal payments of $135.0 million.
Future principal payments for the Company’s term loans (without giving effect to $117.5 million of principal prepayments as of June 30, 2016 that shall be applied to the future schedule quarterly payments) as of June 30, 2016, are as follows:
Fiscal Quarters Ending
 
Quarterly Payment
(in thousands)
September 30, 2016 through December 31, 2016
 
$
9,375

March 31, 2017 through December 31, 2017
 
$
14,063

March 31, 2018 through September 30, 2019
 
$
18,750

December 31, 2019
 
$
487,500

The Credit Facility requires the Company to maintain an interest expense coverage ratio as described in the Credit Agreement, on a quarterly basis, covering the trailing four consecutive fiscal quarters of no less than 3.50 to 1.00. In addition, the Company is required to maintain the maximum leverage ratio as described in the Credit Agreement, on a quarterly basis, covering the trailing four consecutive fiscal quarters for the fiscal quarters as described below.
Fiscal Quarters Ending
 
Maximum Leverage Ratio
June 30, 2016 through September 30, 2016
 
3.75:1.00
December 31, 2016 and March 31, 2017
 
3.50:1.00
Thereafter
 
3.00:1.00
The Company was in compliance with the financial covenants under the Credit Agreement as of June 30, 2016 and had no outstanding borrowings under the unfunded revolving credit facility.
Debt Redemption:
In December 2014, the Company redeemed the $750.0 million aggregate principal amount of the 2018 Senior Notes. The redemption resulted in a pre-tax net loss on extinguishment of debt of $131.7 million for the three months ended December 31, 2014 after an offset of a $1.2 million gain upon the termination of the non-designated forward contract entered by the Company in November 2014. The objective of entering into the non-designated forward contract was to lock the treasury rate used to determine the redemption amount of the 2018 Senior Notes. The notional amount of the non-designated forward contract was $750.0 million. Refer to Note 15, “Derivative Instruments and Hedging Activities.”
NOTE 7 — EQUITY AND LONG-TERM INCENTIVE COMPENSATION PLANS
Equity Incentive Program
As of June 30, 2016, the Company had two plans under which the Company was able to issue equity incentive awards, such as restricted stock units and stock options, to its employees, consultants and members of its Board of Directors: the 2004 Equity Incentive Plan (the “2004 Plan”) and the 1998 Director Plan (the “Outside Director Plan”).

86

Table of Contents

2004 Plan:
The 2004 Plan provides for the grant of options to purchase shares of the Company’s common stock, stock appreciation rights, restricted stock units, performance shares, performance units and deferred stock units to the Company’s employees, consultants and members of its Board of Directors. As of June 30, 2016, 5.1 million shares were available for issuance under the 2004 Plan.
Any 2004 Plan awards of restricted stock units, performance shares, performance units or deferred stock units with a per share or unit purchase price lower than 100% of fair market value on the grant date are counted against the total number of shares issuable under the 2004 Plan as follows, based on the grant date of the applicable award: (a) for any such awards granted before November 6, 2013, the awards counted against the 2004 Plan share reserve as 1.8 shares for every one share subject thereto; and (b) for any such awards granted on or after November 6, 2013, the awards count against the 2004 Plan share reserve as 2.0 shares for every one share subject thereto.
In addition, in November 2013, the Company’s stockholders also approved amendments to the 2004 Plan that included, among other things, giving the plan administrator the ability to grant “dividend equivalent” rights in connection with awards of restricted stock units, performance shares, performance units and deferred stock units before they are fully vested. It allows the plan administrator, at its discretion, to grant a right to receive dividends on the aforementioned awards which may be settled in cash or Company stock at the discretion of the plan administrator subject to meeting the vesting requirement of the underlying awards.
Outside Director Plan
The Outside Director Plan only permits the issuance of stock options to the non-employee members of the Board of Directors. As of June 30, 2016, 1.7 million shares were available for grant under the Outside Director Plan.
Equity Incentive Plans - General Information
The following table summarizes the combined activity under the Company’s equity incentive plans for the indicated periods:
(In thousands)
Available
For Grant
Balances as of June 30, 2013
6,696

Plan shares increased
2,900

Restricted stock units granted(1)(3)
(1,268
)
Restricted stock units canceled(1)
468

Options canceled/expired/forfeited
59

Plan shares expired(2)
(51
)
Balances as of June 30, 2014
8,804

Restricted stock units granted(1)(3)
(1,191
)
Restricted stock units canceled(1)
196

Options canceled/expired/forfeited
11

Plan shares expired(2)
(10
)
Balances as of June 30, 2015(4)
7,810

Restricted stock units granted(1)(3)
(1,541
)
Restricted stock units canceled(1)
509

Balances as of June 30, 2016
6,778

__________________  
(1)
The number of restricted stock units provided in this row reflects the application of the award multiplier as described above (1.8x or 2.0x depending on the grant date of the applicable award).
(2)
Represents the portion of shares listed as “Options canceled/expired/forfeited” above that were issued under the Company’s equity incentive plans other than the 2004 Plan and the Outside Director Plan. Because the Company is only currently authorized to issue equity awards under the 2004 Plan and the Outside Director Plan, any equity awards that are canceled, expired or forfeited under any other Company equity incentive plan do not result in additional shares being available to the Company for future grant.

87

Table of Contents

(3)
Includes restricted stock units granted to senior management with performance-based vesting criteria (in addition to service-based vesting criteria for any of such restricted stock units that are deemed to have been earned). As of June 30, 2016, it had not yet been determined the extent to which (if at all) the performance-based vesting criteria of such restricted stock units had been satisfied. Therefore, this line item includes all such performance-based restricted stock units granted during such fiscal year, reported at the maximum possible number of shares that may ultimately be issuable under such restricted stock units if all applicable performance-based criteria are achieved at their maximum levels and all applicable service-based criteria are fully satisfied (i.e., 0.7 million shares for the fiscal year ended June 30, 2016 and 0.6 million shares for each of the fiscal years ended June 30, 2015 and 2014, which, in each case reflects the application of the 1.8x or 2.0x multiplier described above). The Company has granted only restricted stock units under its equity incentive program since October 2007, except the number of shares subject to outstanding options under the 2004 Plan was adjusted during the three months ended December 31, 2014 due to a proportionate and equitable adjustment under the 2004 Plan provisions as discussed below. For the preceding several years until October 31, 2007, stock options were granted at the market price of the Company’s common stock on the date of grant generally with vesting period terms ranging from one to five years. Restricted stock units may be granted with varying criteria such as service-based and/or performance-based vesting.
(4)
During the fiscal year ended June 30, 2015, the Company adjusted the number of shares subject to outstanding options under the 2004 Plan by an aggregate of 4,245 shares pursuant to a proportionate and equitable adjustment for the effect of the special cash dividend, as required by the 2004 Plan. The total number of outstanding options under the 2004 Plan as well as the associated exercise prices were adjusted to ensure the aggregate intrinsic value remained the same after considering the effect of the special cash dividend. As the adjustment was required by the 2004 Plan, under the authoritative guidance, the adjustment to the outstanding awards did not result in any incremental compensation expense. Additionally, the adjustment did not have an impact on the shares available for future issuance under the 2004 Plan.
The fair value of stock-based awards is measured at the grant date and is recognized as an expense over the employee’s requisite service period. For restricted stock units granted without “dividend equivalent” rights, fair value is calculated using the closing price of the Company’s common stock on the grant date, adjusted to exclude the present value of dividends which are not accrued on those restricted stock units. In November 2013, the Company’s stockholders approved amendments to the 2004 Plan that included, among other things, giving the plan administrator the ability to grant “dividend equivalent” rights in connection with awards of restricted stock units, performance shares, performance units and deferred stock units before they are fully vested as discussed above. The fair value for restricted stock units granted with “dividend equivalent” rights is determined using the closing price of the Company’s common stock on the grant date. As of June 30, 2016, the Company accrued $19.6 million of dividends payable, substantially all of which is related to the special cash dividend for the unvested restricted stock units outstanding as of the dividend record date as well as restricted stock units granted with dividend equivalent rights during the fiscal year ended June 30, 2016, which entitle the holders of such equity awards to the same dividend value per share as holders of common stock subject to meeting the vesting requirements of the underlying equity awards. The fair value for purchase rights under the Company’s Employee Stock Purchase Plan is determined using a Black-Scholes valuation model.
The following table shows pre-tax stock-based compensation expense for the indicated periods: 
 
Year ended June 30,
(In thousands)
2016
 
2015
 
2014
Stock-based compensation expense by:
 
 
 
 
 
Costs of revenues
$
4,689

 
$
7,242

 
$
9,101

Research and development
8,618

 
12,259

 
16,397

Selling, general and administrative
31,743

 
35,801

 
35,442

Total stock-based compensation expense
$
45,050

 
$
55,302

 
$
60,940

The following table shows stock-based compensation capitalized as inventory as of the dates indicated below:
(In thousands)
As of June 30,
2016
 
2015
Inventory
$
2,685

 
$
3,242


88

Table of Contents

Stock Options
The Company has not issued any stock options since October 2007. However, during the three months ended December 31, 2014, the Company adjusted the number of shares subject to outstanding options under the 2004 Plan by an aggregate of 4,245 shares pursuant to a proportionate and equitable adjustment for the effect of the special cash dividend, as required by the 2004 Plan. The total number of outstanding options under the 2004 Plan as well as the associated exercise prices were adjusted to ensure the aggregate intrinsic value remained the same after considering the effect of the special cash dividend. As the adjustment was required by the 2004 Plan, the adjustment to the outstanding awards did not result in any incremental compensation expense due to modification of such awards, under the authoritative guidance. Additionally, the adjustment did not have an impact on the shares available for future issuance under the 2004 Plan.  As of June 30, 2016, the outstanding stock options are immaterial (all vested and exercisable).
The following table shows the total intrinsic value of options exercised, total cash received from employees and non-employee Board members as a result of stock option exercises and tax benefits realized by the Company in connection with these stock option exercises for the indicated periods: 
(In thousands)
Year ended June 30,
2016
 
2015
 
2014
Total intrinsic value of options exercised
$
3

 
$
4,549

 
$
18,022

Total cash received from employees and non-employee Board members as a result of stock option exercises
$
4

 
$
5,892

 
$
72,700

Tax benefits realized by the Company in connection with these exercises
$
1

 
$
1,989

 
$
5,708

The Company generally settles employee stock option exercises with newly issued common shares, except in certain tax jurisdictions where settling such exercises with treasury shares provides the Company or one of its subsidiaries with a tax benefit.
Restricted Stock Units
The following table shows the applicable number of restricted stock units and weighted-average grant date fair value for restricted stock units granted, vested and released, withheld for taxes, and forfeited during the fiscal year ended June 30, 2016 and restricted stock units outstanding as of June 30, 2016 and 2015: 
Restricted Stock Units
Shares
(In thousands) (1)
 
Weighted-Average
Grant Date
Fair Value
Outstanding restricted stock units as of June 30, 2015(2)
2,674

 
$
49.36

Granted(2)
770

 
$
51.12

Vested and released
(855
)
 
$
39.26

Withheld for taxes
(469
)
 
$
39.26

Forfeited
(271
)
 
$
55.62

Outstanding restricted stock units as of June 30, 2016(2)
1,849

 
$
56.41

 __________________ 
(1)
Share numbers reflect actual shares subject to awarded restricted stock units. As described above, under the terms of the 2004 Plan, the number of shares subject to each award reflected in this number is multiplied by either 1.8x or 2.0x (depending on the grant date of the award) to calculate the impact of the award on the share reserve under the 2004 Plan.
(2)
Includes restricted stock units granted to senior management with performance-based vesting criteria (in addition to service-based vesting criteria for any of such restricted stock units that are deemed to have been earned). As of June 30, 2016, it had not yet been determined the extent to which (if at all) the performance-based vesting criteria of such restricted stock units had been satisfied. Therefore, this line item includes all such performance-based restricted stock units, reported at the maximum possible number of shares (i.e., 0.3 million shares for each of the fiscal years ended June 30, 2016, 2015 and 2014) that may ultimately be issuable under such restricted stock units if all applicable performance-based criteria are achieved at their maximum and all applicable service-based criteria are fully satisfied.

89

Table of Contents

The restricted stock units granted by the Company since the beginning of the fiscal year ended June 30, 2013 generally vest (a) with respect to awards with only service-based vesting criteria, in four equal installments on the first, second, third and fourth anniversaries of the grant date and (b) with respect to awards with both performance-based and service-based vesting criteria, in two equal installments on the third and fourth anniversaries of the grant date, in each case subject to the recipient remaining employed by the Company as of the applicable vesting date. The restricted stock units granted by the Company from the beginning of the fiscal year ended June 30, 2007 through the fiscal year ended June 30, 2012 generally vest in two equal installments on the second and fourth anniversaries of the grant date, subject to the recipient remaining employed by the Company as of the applicable vesting date. The restricted stock units granted to the independent members of the board of directors vest on the first anniversary of the date of grant. However, in connection with the closing of the proposed Merger with Lam Research, vesting of the restricted stock units held by the independent members of the board of directors who will not be serving as members of the Lam Research board of directors, will accelerate in whole or in part in accordance with the Company’s accelerated vesting policy approved by the Company’s stockholders at the February 2016 special meeting of stockholders.
The following table shows the weighted-average grant date fair value per unit for the restricted stock units granted and tax benefits realized by the Company in connection with vested and released restricted stock units for the indicated periods: 
(In thousands, except for weighted-average grant date fair value)
Year ended June 30,
2016
 
2015
 
2014
Weighted-average grant date fair value per unit
$
51.12

 
$
74.48

 
$
53.28

Tax benefits realized by the Company in connection with vested and released restricted stock units
$
27,412

 
$
26,250

 
$
44,298

As of June 30, 2016, the unrecognized stock-based compensation expense balance related to restricted stock units was $55.8 million, excluding the impact of estimated forfeitures, and will be recognized over a weighted-average remaining contractual term and an estimated weighted-average amortization period of 1.3 years. The total grant date fair value of vested restricted stock units was $52.0 million, $38.9 million and $81.9 million, in the fiscal years ended 2016, 2015 and 2014, respectively. The intrinsic value of outstanding restricted stock units as of June 30, 2016 was $135.4 million.
Cash-Based Long-Term Incentive Compensation
Starting in the fiscal year ended June 30, 2013, the Company adopted a cash-based long-term incentive (“Cash LTI”) program for many of its employees as part of the Company’s employee compensation program. During the fiscal years ended June 30, 2016 and 2015, the Company approved Cash LTI awards of $49.3 million and $67.7 million, respectively, under the Company’s Cash Long-Term Incentive Plan (“Cash LTI Plan”). Cash LTI awards issued to employees under the Cash LTI Plan will vest in four equal installments, with 25% of the aggregate amount of the Cash LTI award vesting on each yearly anniversary of the grant date over a four-year period. In order to receive payments under a Cash LTI award, participants must remain employed by the Company as of the applicable award vesting date. Executives and non-employee Board members are not participating in this program. During the fiscal years ended June 30, 2016, 2015 and 2014, the Company recognized $44.6 million, $39.6 million and $26.2 million, respectively, in compensation expense under the Cash LTI Plan. As of June 30, 2016, the unrecognized compensation expense (excluding the impact of estimated forfeitures) related to the Cash LTI Plan was $87.2 million.
Employee Stock Purchase Plan
KLA-Tencor’s Employee Stock Purchase Plan (“ESPP”) provides that eligible employees may contribute up to 10% of their eligible earnings toward the semi-annual purchase of KLA-Tencor’s common stock. The ESPP is qualified under Section 423 of the Internal Revenue Code. The employee’s purchase price is derived from a formula based on the closing price of the common stock on the first day of the offering period versus the closing price on the date of purchase (or, if not a trading day, on the immediately preceding trading day).
The offering period (or length of the look-back period) under the ESPP has a duration of six months, and the purchase price with respect to each offering period beginning on or after such date is, until otherwise amended, equal to 85% of the lesser of (i) the fair market value of the Company’s common stock at the commencement of the applicable six-month offering period or (ii) the fair market value of the Company’s common stock on the purchase date. The Company estimates the fair value of purchase rights under the ESPP using a Black-Scholes valuation model. The proposed Merger of KLA-Tencor and Lam Research could shorten the offering period at the time of the close of the Merger. Refer to Note 1, “Description of Business and Summary of Significant Accounting Policies” for additional details regarding the Merger.

90

Table of Contents

The fair value of each purchase right under the ESPP was estimated on the date of grant using the Black-Scholes option valuation model and the straight-line attribution approach with the following weighted-average assumptions: 
 
Year ended June 30,
 
2016
 
2015
 
2014
Stock purchase plan:
 
 
 
 
 
Expected stock price volatility
25.4
%
 
24.5
%
 
27.5
%
Risk-free interest rate
0.2
%
 
0.1
%
 
0.1
%
Dividend yield
3.3
%
 
2.8
%
 
2.9
%
Expected life (in years)
0.50

 
0.50

 
0.50

The following table shows total cash received from employees for the issuance of shares under the ESPP, the number of shares purchased by employees through the ESPP, the tax benefits realized by the Company in connection with the disqualifying dispositions of shares purchased under the ESPP and the weighted-average fair value per share for the indicated periods:
(In thousands, except for weighted-average fair value per share)
Year ended June 30,
2016
 
2015
 
2014
Total cash received from employees for the issuance of shares under the ESPP
$
38,295

 
$
41,116

 
$
39,675

Number of shares purchased by employees through the ESPP
735

 
759

 
796

Tax benefits realized by the Company in connection with the disqualifying dispositions of shares purchased under the ESPP
$
2,194

 
$
1,741

 
$
2,221

Weighted-average fair value per share based on Black-Scholes model
$
12.48

 
$
14.55

 
$
12.31

The ESPP shares are replenished annually on the first day of each fiscal year by virtue of an evergreen provision. The provision allows for share replenishment equal to the lesser of 2.0 million shares or the number of shares which KLA-Tencor estimates will be required to be issued under the ESPP during the forthcoming fiscal year. As of June 30, 2016, a total of 1.4 million shares were reserved and available for issuance under the ESPP.
Quarterly cash dividends
On May 5, 2016, the Company’s Board of Directors declared a regular quarterly cash dividend of $0.52 per share on the outstanding shares of the Company’s common stock, which was paid on June 1, 2016 to the stockholders of record as of the close of business on May 16, 2016. Under the authoritative guidance, the dividend when declared is recognized as a reduction of retained earnings, to the extent available, with any shortfall recognized as a reduction of additional paid-in-capital. The total amount of regular quarterly cash dividends paid by the Company during the fiscal years ended June 30, 2016 and 2015 was $324.5 million and $324.8 million, respectively. The amount of accrued dividends for quarterly cash dividends for unvested restricted stock units with dividend equivalent rights was $2.7 million and $0.9 million as of June 30, 2016 and 2015, respectively.

91

Table of Contents

Special cash dividend
On November 19, 2014, the Company’s Board of Directors declared a special cash dividend of $16.50 per share, which was paid on December 9, 2014 to the stockholders of record as of the close of business on December 1, 2014. Additionally, in connection with the special cash dividend, the Company’s Board of Directors and the Compensation Committee of the Board of Directors approved a proportionate and equitable adjustment to outstanding equity awards (restricted stock units and stock options), as required under the 2004 Plan, subject to the vesting requirements of the underlying awards. As the adjustment was required by the 2004 Plan, the adjustment to the outstanding awards did not result in any incremental compensation expense due to modification of such awards, under the authoritative guidance. Under the authoritative guidance, the dividend when declared is recognized as a reduction of retained earnings, to the extent available, with any shortfall recognized as a reduction of additional paid-in-capital. The special cash dividend reduced the retained earnings by $2.1 billion as of the special cash dividend declaration date, reducing the retained earnings amount to zero and the excess amount of the special cash dividend of $646.5 million was charged against additional paid-in capital. The declaration and payment of the special cash dividend are part of the Company’s leveraged recapitalization transaction under which the special cash dividend was financed through a combination of existing cash and proceeds from the debt financing disclosed in Note 6, “Debt” that was completed during the three months ended December 31, 2014. The total amount of the special cash dividend accrued by the Company during the three months ended December 31, 2014 was approximately $2.76 billion, substantially all of which was paid out during the three months ended December 31, 2014, except for the aggregate special cash dividend of $43.0 million that was accrued for the unvested restricted stock units. As of June 30, 2016 and 2015, the Company had a total of $16.9 million and $41.1 million, respectively, of accrued dividends payable for the special cash dividend with respect to outstanding unvested restricted stock units, which will be paid when such underlying unvested restricted stock units vest. The Company paid a special cash dividend with respect to vested restricted stock units during the fiscal years ended June 30, 2016 and 2015 of $21.8 million and $1.8 million respectively. Other than the special cash dividend declared during the three months ended December 31, 2014, the Company historically has not declared any special cash dividends.
NOTE 8 — STOCK REPURCHASE PROGRAM
The Company’s Board of Directors has authorized a program for the Company to repurchase shares of the Company’s common stock. The intent of this program is to offset the dilution from KLA-Tencor’s equity incentive plans and employee stock purchase plan, as well as to return excess cash to the Company’s stockholders. Subject to market conditions, applicable legal requirements and other factors, the repurchases were made in the open market in compliance with applicable securities laws, including the Securities Exchange Act of 1934 and the rules promulgated thereunder such as Rule 10b-18. As of June 30, 2016, an aggregate of approximately 5.9 million shares were available for repurchase under the Company’s repurchase program. In connection with entering into the Merger Agreement with Lam Research, the Company suspended further repurchases under its repurchase program effective October 21, 2015.
Share repurchases for the indicated periods (based on the trade date of the applicable repurchase) were as follows: 
(In thousands)
Year ended June 30,
2016
 
2015
Number of shares of common stock repurchased
3,445

 
9,255

Total cost of repurchases
$
175,743

 
$
608,856

As of June 30, 2015, the Company had repurchased 105,542 shares for $6.0 million, which repurchases had not settled prior to June 30, 2015. The amount was recorded as a component of other current liabilities for the period presented.

92

Table of Contents

NOTE 9 — NET INCOME PER SHARE
Basic net income per share is calculated by dividing net income available to common stockholders by the weighted-average number of common shares outstanding during the period. Diluted net income per share is calculated by using the weighted-average number of common shares outstanding during the period, increased to include the number of additional shares of common stock that would have been outstanding if the shares of common stock underlying the Company’s outstanding dilutive restricted stock units and stock options had been issued. The dilutive effect of outstanding restricted stock units and options is reflected in diluted net income per share by application of the treasury stock method. Under the treasury stock method, the amount the employee must pay for exercising stock options, the amount of compensation cost for future service that the Company has not yet recognized, and the amount of tax benefits that is to be recorded in additional paid-in capital when the award becomes deductible are assumed to be used to repurchase shares.
The following table sets forth the computation of basic and diluted net income per share:
(In thousands, except per share amounts)
Year ended June 30,
2016
 
2015
 
2014
Numerator:
 
 
 
 
 
Net income
$
704,422

 
$
366,158

 
$
582,755

Denominator:
 
 
 
 
 
Weighted-average shares-basic, excluding unvested restricted stock units
155,869

 
162,282

 
166,016

Effect of dilutive options and restricted stock units
910

 
1,419

 
2,102

Weighted-average shares-diluted
156,779

 
163,701

 
168,118

Basic net income per share
$
4.52

 
$
2.26

 
$
3.51

Diluted net income per share
$
4.49

 
$
2.24

 
$
3.47

Anti-dilutive securities excluded from the computation of diluted net income per share
9

 
36

 

NOTE 10 — EMPLOYEE BENEFIT PLANS
KLA-Tencor has a profit sharing program for eligible employees, which distributes, on a quarterly basis, a percentage of the Company’s pre-tax profits. In addition, the Company has an employee savings plan that qualifies as a deferred salary arrangement under Section 401(k) of the Internal Revenue Code. Since April 1, 2011, the employer match amount was 50% of the first $8,000 of an eligible employee’s contribution (i.e., a maximum of $4,000) during each fiscal year.
The total expenses under the profit sharing and 401(k) programs aggregated $15.3 million, $14.2 million and $15.4 million in the fiscal years ended June 30, 2016, 2015 and 2014, respectively. The Company has no defined benefit plans in the United States. In addition to the profit sharing plan and the United States 401(k), several of the Company’s foreign subsidiaries have retirement plans for their full-time employees, several of which are defined benefit plans. Consistent with the requirements of local law, the Company deposits funds for certain of these plans with insurance companies, with third-party trustees or into government-managed accounts and/or accrues for the unfunded portion of the obligation. The assumptions used in calculating the obligation for the foreign plans depend on the local economic environment.
The Company applies authoritative guidance that requires an employer to recognize the funded status of each of its defined pension and post-retirement benefit plans as a net asset or liability on its balance sheets. Additionally, the authoritative guidance requires an employer to measure the funded status of each of its plans as of the date of its year-end statement of financial position. The benefit obligations and related assets under the Company’s plans have been measured as of June 30, 2016 and 2015.

93

Table of Contents

Summary data relating to the Company’s foreign defined benefit pension plans, including key weighted-average assumptions used, is provided in the following tables:
 
Year ended June 30,
(In thousands)
2016
 
2015
Change in projected benefit obligation:
 
 
 
Projected benefit obligation as of the beginning of the fiscal year
$
75,928

 
$
77,035

Service cost
3,349

 
3,905

Interest cost
1,322

 
1,562

Contributions by plan participants
163

 
81

Actuarial loss
9,029

 
3,702

Benefit payments
(2,517
)
 
(3,982
)
Foreign currency exchange rate changes and others, net
2,649

 
(6,375
)
Projected benefit obligation as of the end of the fiscal year
$
89,923

 
$
75,928

 
 
 
 
 
Year ended June 30,
(In thousands)
2016
 
2015
Change in fair value of plan assets:
 
 
 
Fair value of plan assets as of the beginning of the fiscal year
$
17,038

 
$
15,163

Actual return on plan assets
588

 
334

Employer contributions
4,330

 
3,568

Benefit and expense payments
(2,517
)
 
(3,982
)
Foreign currency exchange rate changes and others, net
(545
)
 
1,955

Fair value of plan assets as of the end of the fiscal year
$
18,894

 
$
17,038

 
 
As of June 30,
(In thousands)
2016
 
2015
Underfunded status
$
71,029

 
$
58,890

 
 
 
 
 
As of June 30,
(In thousands)
2016
 
2015
Plans with accumulated benefit obligations in excess of plan assets:
 
 
 
Accumulated benefit obligation
$
53,198

 
$
46,419

Projected benefit obligation
$
89,923

 
$
75,928

Plan assets at fair value
$
18,894

 
$
17,038

 
 
Year ended June 30,
 
2016

2015

2014
Weighted-average assumptions:
 
 
 
 
 
Discount rate
0.5%-2.0%
 
1.3%-2.0%
 
1.5%-3.5%
Expected rate of return on assets
1.8%-2.5%
 
1.8%-2.5%
 
1.8%-3.8%
Rate of compensation increases
3.0%-5.8%
 
3.0%-5.5%
 
3.0%-5.5%
The assumptions for expected rate of return on assets were developed by considering the historical returns and expectations of future returns relevant to the country in which each plan is in effect and the investments applicable to the corresponding plan. The discount rate for each plan was derived by reference to appropriate benchmark yields on high quality corporate bonds, allowing for the approximate duration of both plan obligations and the relevant benchmark index.

94

Table of Contents

The following table presents losses recognized in accumulated other comprehensive income (loss) before tax related to the Company’s foreign defined benefit pension plans: 
 
Year ended June 30,
(In thousands)
2016
 
2015
Unrecognized transition obligation
$
108

 
$
515

Unrecognized prior service cost
113

 
180

Unrealized net loss
31,739

 
24,119

Amount of losses recognized
$
31,960

 
$
24,814

Losses in accumulated other comprehensive income (loss) related to the Company’s foreign defined benefit pension plans expected to be recognized as components of net periodic benefit cost over the fiscal year ending June 30, 2017 are as follows: 
(In thousands)
Year ending
June 30, 2017
Unrecognized transition obligation
$
243

Unrecognized prior service cost
50

Unrealized net loss
1,329

Amount of losses expected to be recognized
$
1,622

 
The components of the Company’s net periodic cost relating to its foreign subsidiaries’ defined pension plans are as follows: 
 
Year ended June 30,
(In thousands)
2016
 
2015
 
2014
Components of net periodic pension cost:
 
 
 
 
 
Service cost
$
3,349

 
$
3,905

 
$
4,054

Interest cost
1,322

 
1,562

 
1,401

Return on plan assets
(406
)
 
(450
)
 
(321
)
Amortization of transitional obligation
249

 
259

 
262

Amortization of prior service cost
46

 
46

 
52

Amortization of net loss
1,132

 
1,014

 
1,021

Adjustment

 
(177
)
 

Net periodic pension cost
$
5,692

 
$
6,159

 
$
6,469

Fair Value of Plan Assets
Fair value is the price that would be received from selling an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date. The three levels of inputs used to measure fair value of plan assets are described in Note 2, “Fair Value Measurements.”
The foreign plans’ investments are managed by third-party trustees consistent with the regulations or market practice of the country where the assets are invested. The Company is not actively involved in the investment strategy, nor does it have control over the target allocation of these investments. These investments made up 100% of total foreign plan assets in the fiscal years ended June 30, 2016 and 2015.
The expected aggregate employer contribution for the foreign plans during the fiscal year ending June 30, 2017 is $1.8 million.
The total benefits to be paid from the foreign pension plans are not expected to exceed $2.9 million in any year through the fiscal year ending June 30, 2026.

95

Table of Contents

Foreign plan assets measured at fair value on a recurring basis consisted of the following investment categories as of June 30, 2016 and 2015, respectively:
As of June 30, 2016 (In thousands)
Total
 
Quoted Prices in
Active Markets
for Identical
Assets (Level 1)
 
Significant Other
Observable Inputs
(Level 2)
Cash and cash equivalents
$
11,950

 
$
11,950

 
$

Bonds, equity securities and other investments
6,944

 

 
6,944

Total assets measured at fair value
$
18,894

 
$
11,950

 
$
6,944

 
 
 
 
 
 
As of June 30, 2015 (In thousands)
Total
 
Quoted Prices in
Active Markets
for Identical
Assets (Level 1)
 
Significant Other
Observable Inputs
(Level 2)

Cash and cash equivalents
$
10,954

 
$
10,954

 
$

Bonds, equity securities and other investments
6,084

 

 
6,084

Total assets measured at fair value
$
17,038

 
$
10,954

 
$
6,084

 Concentration of Risk
The Company manages a variety of risks, including market, credit and liquidity risks, across its plan assets through its investment managers. The Company defines a concentration of risk as an undiversified exposure to one of the above-mentioned risks that increases the exposure of the loss of plan assets unnecessarily. The Company monitors exposure to such risks in the foreign plans by monitoring the magnitude of the risk in each plan and diversifying the Company’s exposure to such risks across a variety of instruments, markets and counterparties. As of June 30, 2016, the Company did not have concentrations of plan asset investment risk in any single entity, manager, counterparty, sector, industry or country.
NOTE 11 — INCOME TAXES
The components of income before income taxes are as follows: 
 
Year ended June 30,
(In thousands)
2016
 
2015
 
2014
Domestic income before income taxes
$
417,803

 
$
157,251

 
$
434,336

Foreign income before income taxes
440,389

 
276,880

 
300,125

Total income before income taxes
$
858,192

 
$
434,131

 
$
734,461

The provision for income taxes is comprised of the following: 
(In thousands)
Year ended June 30,
2016
 
2015
 
2014
Current:
 
 
 
 
 
Federal
$
94,088

 
$
63,123

 
$
98,937

State
6,123

 
3,655

 
8,580

Foreign
37,680

 
25,438

 
27,867

 
137,891

 
92,216

 
135,384

Deferred:
 
 
 
 
 
Federal
15,645

 
(22,390
)
 
22,904

State
3,583

 
409

 
(334
)
Foreign
(3,349
)
 
(2,262
)
 
(6,248
)
 
15,879

 
(24,243
)
 
16,322

Provision for income taxes
$
153,770

 
$
67,973

 
$
151,706

Current tax liabilities were lower than reflected in the table above for the fiscal years ended June 30, 2016, 2015 and 2014 by $11.5 million, $16.7 million and $16.5 million, respectively, primarily due to a benefit for a deduction related to employee stock activity, which was recorded as an increase to capital in excess of par value.

96

Table of Contents

The significant components of deferred income tax assets and liabilities are as follows:
(In thousands)
As of June 30,
2016
 
2015
Deferred tax assets:
 
 
 
Tax credits and net operating losses
$
116,277

 
$
108,615

Employee benefits accrual
109,524

 
99,472

Stock-based compensation
13,607

 
18,722

Inventory reserves
94,783

 
92,649

Non-deductible reserves
34,484

 
47,176

Depreciation and amortization
15,857

 
13,267

Unearned revenue
14,375

 
16,150

Other
26,877

 
28,831

Gross deferred tax assets
425,784

 
424,882

Valuation allowance
(104,968
)
 
(91,350
)
Net deferred tax assets
$
320,816

 
$
333,532

Deferred tax liabilities:
 
 
 
Unremitted earnings of foreign subsidiaries not indefinitely reinvested
$
(11,571
)
 
$
(12,775
)
Deferred profit
(10,346
)
 
(7,372
)
Unrealized gain on investments
(604
)
 
(2,673
)
Total deferred tax liabilities
(22,521
)
 
(22,820
)
Total net deferred tax assets
$
298,295

 
$
310,712

As of June 30, 2016, the Company had U.S. federal, state and foreign net operating loss (“NOL”) carry-forwards of approximately $22.9 million, $63.2 million and $41.8 million, respectively. The U.S. federal NOL carry-forwards will expire at various dates beginning in 2023 through 2027. The utilization of NOLs created by acquired companies is subject to annual limitations under Section 382 of the Internal Revenue Code. However, it is not expected that such annual limitation will significantly impair the realization of these NOLs. The state NOLs will begin to expire in 2017. State credits of $145.4 million will be carried over indefinitely. The foreign NOL carry-forwards will begin to expire in 2017.
The net deferred tax asset valuation allowance was $105.0 million and $91.4 million as of June 30, 2016 and June 30, 2015, respectively. The change was primarily due to an increase in the valuation allowance related to state credit carry-forwards generated in the fiscal year ended June 30, 2016. The valuation allowance is based on the Company’s assessment that it is more likely than not that certain deferred tax assets will not be realized in the foreseeable future. Of the valuation allowance as of June 30, 2016, $89.8 million relates to state credit carry-forwards. The remainder of the valuation allowance relates primarily to state and foreign NOL carry-forwards.
 As of June 30, 2016, U.S. income taxes were not provided for on a cumulative total of approximately $2.1 billion of undistributed earnings for certain non-U.S. subsidiaries. If these undistributed earnings were repatriated to the United States, they would generate foreign tax credits to reduce the federal tax liability associated with the foreign dividend. Assuming full utilization of the foreign tax credits, the potential deferred tax liability associated with undistributed earnings would be approximately $707 million.
KLA-Tencor benefits from tax holidays in Israel and Singapore where it manufactures certain of its products. These tax holidays are on approved investments and are scheduled to expire at varying times in the next three to five years. The Company was in compliance with all the terms and conditions of the tax holidays as of June 30, 2016. The net impact of these tax holidays was to decrease the Company’s tax expense by approximately $19.5 million, $20.4 million and $25.8 million in the fiscal years ended June 30, 2016, 2015 and 2014, respectively. The benefits of the tax holidays on diluted net income per share were $0.12, $0.13 and $0.15 for the fiscal years ended June 30, 2016, 2015 and 2014, respectively.

97

Table of Contents

The reconciliation of the United States federal statutory income tax rate to KLA-Tencor’s effective income tax rate is as follows: 
 
Year ended June 30,
 
2016
 
2015
 
2014
Federal statutory rate
35.0
 %
 
35.0
 %
 
35.0
 %
State income taxes, net of federal benefit
0.9
 %
 
0.7
 %
 
0.7
 %
Effect of foreign operations taxed at various rates
(13.0
)%
 
(15.3
)%
 
(11.5
)%
Research and development tax credit
(1.9
)%
 
(3.7
)%
 
(1.5
)%
Net change in tax reserves
(2.2
)%
 
1.5
 %
 
0.3
 %
Domestic manufacturing benefit
(1.5
)%
 
(2.1
)%
 
(1.4
)%
Effect of stock-based compensation
0.3
 %
 
0.8
 %
 
0.4
 %
Other
0.3
 %
 
(1.2
)%
 
(1.3
)%
Effective income tax rate
17.9
 %
 
15.7
 %
 
20.7
 %
A reconciliation of gross unrecognized tax benefits is as follows: 
 
Year ended June 30,
(In thousands)
2016
 
2015
 
2014
Unrecognized tax benefits at the beginning of the year
$
69,018

 
$
59,575

 
$
59,494

Increases for tax positions taken in prior years
4,245

 
1,245

 
551

Decreases for tax positions taken in prior years
(1,209
)
 
(7
)
 
(764
)
Increases for tax positions taken in current year
13,636

 
11,634

 
11,585

Decreases for settlements with taxing authorities
(8,762
)
 

 
(3,601
)
Decreases for lapsing of statutes of limitations
(26,563
)
 
(3,429
)
 
(7,690
)
Unrecognized tax benefits at the end of the year
$
50,365

 
$
69,018

 
$
59,575

 
The amount of unrecognized tax benefits that would impact the effective tax rate was $50.4 million, $69.0 million and $59.6 million as of June 30, 2016, 2015 and 2014 respectively. The amount of interest and penalties recognized during the years ended June 30, 2016, 2015, and 2014 was income of $4.3 million as a result of a release of unrecognized tax benefits, expense of $1.2 million, and expense of $0.7 million, respectively. KLA-Tencor’s policy is to include interest and penalties related to unrecognized tax benefits within other expense (income), net. The amount of interest and penalties accrued as of June 30, 2016 and 2015 was approximately $3.7 million and $7.9 million, respectively.
The Company is subject to federal income tax examinations for all years beginning from the fiscal year ended June 30, 2014. The Company is subject to state income tax examinations for all years beginning from the fiscal year ended June 30, 2012. The Company is also subject to examinations in other major foreign jurisdictions, including Singapore, for all years beginning from the fiscal year ended June 30, 2012. The Company believes that adequate amounts have been reserved for any adjustments that may ultimately result from any future examinations of these years.
It is possible that certain examinations may be concluded in the next twelve months. The Company believes it is possible that it may recognize up to $3.9 million of its existing unrecognized tax benefits within the next 12 months as a result of the lapse of statutes of limitations and the resolution of examinations with various tax authorities.

98

Table of Contents

NOTE 12 — COMMITMENTS AND CONTINGENCIES
Merger-related Commitment and Fees. KLA-Tencor has an agreement with a financial advisor in relation to the pending Merger with Lam Research. KLA-Tencor has agreed to pay the third party a fee of approximately $58.0 million, $0.1 million of which was paid upon the execution of the engagement letter and $5.0 million of which was paid upon delivery of the fairness opinion, and the remaining portion of which will be paid upon, and subject to, consummation of the Merger (provided that the final actual fee will be, in part, based on an average of the closing prices of Lam Research common stock over ten trading days approaching the closing of the Merger). During the fiscal year ended June 30, 2016, $5.1 million of the above fees were recorded in selling, general and administrative line of the consolidated statements of operations. In addition, the Merger Agreement contains certain termination rights for KLA-Tencor and further provides that KLA-Tencor, as applicable, may be required to pay a termination fee of $290.0 million to Lam Research under certain circumstances. The Company also has an estimated $23.8 million of employee-related retention commitments as of June 30, 2016 in connection with the pending Merger, which are expected to be paid over the stipulated period following the Merger.
Factoring. KLA-Tencor has agreements (referred to as “factoring agreements”) with financial institutions to sell certain of its trade receivables and promissory notes from customers without recourse. The Company does not believe it is at risk for any material losses as a result of these agreements. In addition, the Company periodically sells certain letters of credit (“LCs”), without recourse, received from customers in payment for goods.
The following table shows total receivables sold under factoring agreements and proceeds from sales of LCs for the indicated periods:
 
Year ended June 30,
(In thousands)
2016
 
2015
 
2014
Receivables sold under factoring agreements
$
205,790

 
$
137,285

 
$
116,292

Proceeds from sales of LCs
$
21,904

 
$
6,920

 
$
8,323

Factoring and LC fees for the sale of certain trade receivables were recorded in other expense (income), net and were not material for the periods presented.
Facilities. KLA-Tencor leases certain of its facilities under arrangements that are accounted for as operating leases. Rent expense was $8.7 million, $9.1 million and $8.7 million for the fiscal years ended June 30, 2016, 2015 and 2014, respectively.
The following is a schedule of expected operating lease payments: 
Fiscal year ending June 30,
Amount
(In thousands)
2017
$
8,026

2018
5,006

2019
2,363

2020
1,613

2021
25

2022 and thereafter
25

Total minimum lease payments
$
17,058

Purchase Commitments. KLA-Tencor maintains commitments to purchase inventory from its suppliers as well as goods and services in the ordinary course of business. The Company’s liability under these purchase commitments is generally restricted to a forecasted time-horizon as mutually agreed upon between the parties. This forecasted time-horizon can vary among different suppliers. The Company’s estimate of its significant purchase commitments is approximately $292.9 million as of June 30, 2016 which are primarily due within the next 12 months. Actual expenditures will vary based upon the volume of the transactions and length of contractual service provided. In addition, the amounts paid under these arrangements may be less in the event that the arrangements are renegotiated or canceled. Certain agreements provide for potential cancellation penalties.

99

Table of Contents

Cash Long-Term Incentive Plan. As of June 30, 2016, the Company had committed $121.4 million for future payment obligations under its Cash LTI Plan. The calculation of compensation expense related to the Cash LTI Plan includes estimated forfeiture rate assumptions. Cash LTI awards issued to employees under the Cash LTI Plan vest in four equal installments, with 25% of the aggregate amount of the Cash LTI award vesting on each yearly anniversary of the grant date over a four-year period. In order to receive payments under a Cash LTI award, participants must remain employed by the Company as of the applicable award vesting date.
Warranties, Guarantees and Contingencies. KLA-Tencor provides standard warranty coverage on its systems for 40 hours per week for 12 months, providing labor and parts necessary to repair the systems during the warranty period. The Company accounts for the estimated warranty cost as a charge to costs of revenues when revenue is recognized. The estimated warranty cost is based on historical product performance and field expenses. Utilizing actual service records, the Company calculates the average service hours and parts expense per system and applies the actual labor and overhead rates to determine the estimated warranty charge. The Company updates these estimated charges on a regular basis. The actual product performance and/or field expense profiles may differ, and in those cases the Company adjusts its warranty accruals accordingly.
The following table provides the changes in the product warranty accrual for the indicated periods:
 
Year ended June 30,
(In thousands)
2016
 
2015
Beginning balance
$
36,413

 
$
37,746

Accruals for warranties issued during the period
39,175

 
39,368

Changes in liability related to pre-existing warranties
(9,146
)
 
(572
)
Settlements made during the period
(31,669
)
 
(40,129
)
Ending balance
$
34,773

 
$
36,413

The Company maintains guarantee arrangements available through various financial institutions for up to $22.1 million, of which $18.7 million had been issued as of June 30, 2016, primarily to fund guarantees to customs authorities for value-added tax (“VAT”) and other operating requirements of the Company’s subsidiaries in Europe and Asia.
KLA-Tencor is a party to a variety of agreements pursuant to which it may be obligated to indemnify the other party with respect to certain matters. Typically, these obligations arise in connection with contracts and license agreements or the sale of assets, under which the Company customarily agrees to hold the other party harmless against losses arising from, or provides customers with other remedies to protect against, bodily injury or damage to personal property caused by the Company’s products, non-compliance with the Company’s product performance specifications, infringement by the Company’s products of third-party intellectual property rights and a breach of warranties, representations and covenants related to matters such as title to assets sold, validity of certain intellectual property rights, non-infringement of third-party rights, and certain income tax-related matters. In each of these circumstances, payment by the Company is typically subject to the other party making a claim to and cooperating with the Company pursuant to the procedures specified in the particular contract.
This usually allows the Company to challenge the other party’s claims or, in case of breach of intellectual property representations or covenants, to control the defense or settlement of any third-party claims brought against the other party. Further, the Company’s obligations under these agreements may be limited in terms of amounts, activity (typically at the Company’s option to replace or correct the products or terminate the agreement with a refund to the other party), and duration. In some instances, the Company may have recourse against third parties and/or insurance covering certain payments made by the Company.
Subject to certain limitations, the Company is obligated to indemnify its current and former directors, officers and employees with respect to certain litigation matters and investigations that arise in connection with their service to the Company. These obligations arise under the terms of the Company’s certificate of incorporation, its bylaws, applicable contracts, and Delaware and California law. The obligation to indemnify generally means that the Company is required to pay or reimburse the individuals’ reasonable legal expenses and possibly damages and other liabilities incurred in connection with these matters.

100

Table of Contents

In addition, the Company may in limited circumstances enter into agreements that contain customer-specific commitments on pricing, tool reliability, spare parts stocking levels, response time and other commitments. Furthermore, the Company may give these customers limited audit or inspection rights to enable them to confirm that the Company is complying with these commitments. If a customer elects to exercise its audit or inspection rights, the Company may be required to expend significant resources to support the audit or inspection, as well as to defend or settle any dispute with a customer that could potentially arise out of such audit or inspection. To date, the Company has made no significant accruals in its consolidated financial statements for this contingency. While the Company has not in the past incurred significant expenses for resolving disputes regarding these types of commitments, the Company cannot make any assurance that it will not incur any such liabilities in the future.
It is not possible to predict the maximum potential amount of future payments under these or similar agreements due to the conditional nature of the Company’s obligations and the unique facts and circumstances involved in each particular agreement. Historically, payments made by the Company under these agreements have not had a material effect on its business, financial condition, results of operations or cash flows.
NOTE 13 — LITIGATION AND OTHER LEGAL MATTERS
Litigation Related to Proposed Merger with Lam Research.
The California Class Actions. In connection with the October 21, 2015 announcement of the Merger transaction, four purported KLA-Tencor stockholders filed putative class actions on behalf of all KLA-Tencor stockholders. Three actions were filed in the California Superior Court for Santa Clara County and are captioned, Hedgecock v. KLA-Tencor Corp., et al., Case No. 115CV287329, Karr v. KLA-Tencor Corporation, et al., Case No. 115CV287331, (both filed on October 28, 2015) and Spoleto Corp. v. Wallace, et al., Case No. 115CV289552 (filed on December 29, 2015) (collectively, the “California Class Actions”). Plaintiffs in the Hedgecock and Karr actions filed amended complaints on December 21, 2015. The California Class Actions all name KLA-Tencor, the members of the KLA-Tencor Board, Lam Research, Merger Sub 1, and Merger Sub 2 (together with Merger Sub 1 and Lam Research, the “Lam Group”) as defendants. The California Class Actions allege that the members of the KLA-Tencor Board breached their fiduciary duties by, among other things, causing KLA-Tencor to agree to a merger transaction with the Lam Group at an unfair price and pursuant to an unfair process, and by making disclosures concerning the transaction that are materially misleading. Plaintiffs allege that the Lam Group aided and abetted such breaches. Plaintiffs seek to enjoin or rescind KLA-Tencor’s transaction with the Lam Group, as applicable, as well as an award of damages and attorneys’ fees, in addition to other relief.
The Delaware Chancery Court Class Action. One putative class action was filed on November 10, 2015, in the Court of Chancery in the State of Delaware and is captioned, Rooney v. Wallace, et al., Case No. 11700. On December 23, 2015, plaintiff Rooney filed an amended complaint. The Rooney action was filed against the members of the KLA-Tencor Board and similar to the California Class Actions alleges that the members of the KLA-Tencor Board breached their fiduciary duties by, among other things, causing KLA-Tencor to agree to a merger transaction with Lam Research at an unfair price and pursuant to an unfair process, and by making disclosures concerning the transaction that are materially misleading. Plaintiff Rooney seeks to enjoin or rescind KLA-Tencor’s transaction with Lam Research, as applicable, as well as an award of attorneys’ fees, in addition to other relief. KLA-Tencor has made an accrual with respect to the Hedgecock, Spoleto and Rooney actions.
Agreement in Principle to Resolve Merger-Related Litigation. On or about December 29, 2015, plaintiffs in all four actions agreed to coordinate and proceed in the California Superior Court. On February 5, 2016, an agreement in principle was reached with the plaintiffs in the Rooney Action, Hedgecock Action, and Spoleto Action to settle those actions. Pursuant to the agreement in principle, as set forth in a signed memorandum of understanding, the parties agreed to resolve disputed legal claims and KLA-Tencor and Lam agreed to make certain supplemental disclosures regarding the proposed Merger, as set forth in the Form 8-K filed by KLA-Tencor on February 5, 2016. None of the defendants in these actions has admitted wrongdoing of any kind, including that there were any inadequacies in any disclosure, any breach of any fiduciary duty, or aiding or abetting any of the foregoing. On February 17, 2016, the California Superior Court dismissed the Karr action pursuant to a stipulation by the parties.


101

Table of Contents

The agreement in principle is expected to be further memorialized in a stipulation of settlement, which will be subject to customary terms and conditions, including court approval, and will include an agreement by the plaintiffs, on behalf of a class of KLA-Tencor stockholders, to provide a release of claims of KLA stockholders against KLA-Tencor, the Lam Group and their respective officers and directors. Following final approval of the settlement by the court, the Hedgecock, Spoleto, and Rooney actions will be dismissed. The settlement will not affect the Merger consideration to be paid to stockholders of KLA-Tencor in connection with the acquisition of KLA-Tencor by Lam. KLA-Tencor has made an accrual with respect to the Hedgecock, Spoleto and Rooney actions. KLA-Tencor has determined a potential loss in excess of the amount accrued is reasonably possible; however, based on its current knowledge, KLA-Tencor does not believe that the amount of such possible loss or a range of potential loss is reasonably estimable.
Other Legal Matters
The Company is named from time to time as a party to lawsuits and other types of legal proceedings and claims in the normal course of its business. Actions filed against the Company include commercial, intellectual property, customer, and labor and employment related claims, including complaints of alleged wrongful termination and potential class action lawsuits regarding alleged violations of federal and state wage and hour and other laws. In general, legal proceedings and claims, regardless of their merit, and associated internal investigations (especially those relating to intellectual property or confidential information disputes) are often expensive to prosecute, defend or conduct and may divert management’s attention and other company resources. Moreover, the results of legal proceedings are difficult to predict, and the costs incurred in litigation can be substantial, regardless of outcome. The Company believes the amounts provided in its consolidated financial statements are adequate in light of the probable and estimated liabilities. However, because such matters are subject to many uncertainties, the ultimate outcomes are not predictable, and there can be no assurances that the actual amounts required to satisfy alleged liabilities from the matters described above will not exceed the amounts reflected in the Company’s consolidated financial statements or will not have a material adverse effect on its results of operations, financial condition or cash flows.
NOTE 14 — RESTRUCTURING CHARGES
The Company has in recent years undertaken a number of cost reduction activities, including workforce reductions, in an effort to lower its ongoing expense run rate. The program in the United States is accounted for in accordance with the authoritative guidance related to compensation for non-retirement post-employment benefits, whereas the programs in the Company’s international locations are accounted for in accordance with the authoritative guidance for contingencies.
During the fourth quarter of fiscal year ended 2015, the Company implemented a plan to reduce its global employee workforce to streamline the organization and business processes in response to changing customer requirements in the industry. The goals of this reduction were to enable continued innovation, direct the Company’s resources toward its best opportunities and lower its ongoing expense run rate. The Company substantially completed its global workforce reduction during the fiscal year ended June 31, 2016 and recorded an $8.9 million net restructuring charge, of which $3.6 million was recorded to costs of revenues, $1.6 million to research and development expense and $3.7 million to selling, general and administrative expense lines of the consolidated statements of operations. During the fiscal year ended June 30, 2015, the Company recorded a $31.6 million net restructuring charge, of which $8.0 million was recorded to costs of revenues, $11.1 million to research and development expense and $12.5 million to selling, general and administrative expense lines of the consolidated statements of operations.
The following table shows the activity primarily related to accrual for severance and benefits for the fiscal years ended June 30, 2016 and 2015:
 
Year ended June 30,
(In thousands)
2016
 
2015
Beginning balance
$
24,887

 
$
2,329

Restructuring costs
8,926

 
31,569

Adjustments
(142
)
 
1,177

Cash payments
(33,084
)
 
(10,188
)
Ending balance
$
587

 
$
24,887

The remaining accrual for severance and benefits as of June 30, 2016 is expected to be paid out by the end of the Company’s quarter ending December 31, 2016.

102

Table of Contents

NOTE 15 — DERIVATIVE INSTRUMENTS AND HEDGING ACTIVITIES
The authoritative guidance requires companies to recognize all derivative instruments and hedging activities, including foreign currency exchange contracts, as either assets or liabilities at fair value on the balance sheet. Changes in the fair value of derivatives that do not qualify for hedge treatment, as well as the ineffective portion of any hedges, are recognized in other expense (income), net in the consolidated statements of operations. In accordance with the guidance, the Company designates foreign currency forward exchange and option contracts as cash flow hedges of certain forecasted foreign currency denominated sales and purchase transactions.
KLA-Tencor’s foreign subsidiaries operate and sell KLA-Tencor’s products in various global markets. As a result, KLA-Tencor is exposed to risks relating to changes in foreign currency exchange rates. KLA-Tencor utilizes foreign currency forward exchange contracts and option contracts to hedge against future movements in foreign exchange rates that affect certain existing and forecasted foreign currency denominated sales and purchase transactions, such as the Japanese yen, the euro, the New Taiwan dollar and the Israeli new shekel. The Company routinely hedges its exposures to certain foreign currencies with various financial institutions in an effort to minimize the impact of certain currency exchange rate fluctuations. These currency forward exchange contracts and options, designated as cash flow hedges, generally have maturities of less than 18 months. Cash flow hedges are evaluated for effectiveness monthly, based on changes in total fair value of the derivatives. If a financial counterparty to any of the Company’s hedging arrangements experiences financial difficulties or is otherwise unable to honor the terms of the foreign currency hedge, the Company may experience material losses.
For derivative instruments that are designated and qualify as cash flow hedges, the effective portion of the gains or losses on the derivative is reported as a component of accumulated other comprehensive income (loss) (“OCI”) and reclassified into earnings in the same period or periods during which the hedged transaction affects earnings. Changes in the fair value of currency forward exchange and option contracts due to changes in time value are excluded from the assessment of effectiveness. Gains and losses on the derivative representing either hedge ineffectiveness or hedge components excluded from the assessment of effectiveness are recognized in current earnings.
For derivative instruments that are not designated as accounting hedges, gains and losses are recognized in other expense (income), net. The Company uses foreign currency forward contracts to hedge certain foreign currency denominated assets or liabilities. The gains and losses on these derivatives are largely offset by the changes in the fair value of the assets or liabilities being hedged.
In October 2014, in anticipation of the issuance of the Senior Notes, the Company entered into a series of forward contracts (“Rate Lock Agreements”) to lock the benchmark rate on a portion of the Senior Notes. The objective of the Rate Lock Agreements was to hedge the risk associated with the variability in interest rates due to the changes in the benchmark rate leading up to the closing of the intended financing, on the notional amount being hedged. The Rate Lock Agreements had a notional amount of $1.00 billion in aggregate which matured in the second quarter of the fiscal year ended June 30, 2015. The Company designated each of the Rate Lock Agreements as a qualifying hedging instrument and accounted for as a cash flow hedge, under which the effective portion of the gain or loss on the close out of the Rate Lock Agreements was initially recognized in accumulated other comprehensive income (loss) as a reduction of total stockholders’ equity and subsequently amortized into earnings as a component of interest expense over the term of the underlying debt. The ineffective portion, if any, was recognized in earnings immediately. The Rate Lock Agreements were terminated on the date of pricing of the $1.25 billion of 4.650% Senior Notes due in 2024 and the Company recorded the fair value of $7.5 million as a gain within accumulated other comprehensive income (loss) as of December 31, 2014. For the fiscal years ended June 30, 2016 and 2015, the Company recognized $0.8 million and $0.5 million, respectively, for the amortization of the gain recognized in accumulated other comprehensive income (loss), which amount reduced the interest expense. As of June 30, 2016, the unamortized portion of the fair value of the forward contracts for the rate lock agreements was $6.3 million. The cash proceeds of $7.5 million from the settlement of the Rate Lock Agreements were included in the cash flows from operating activities in the consolidated statements of cash flows for the fiscal year ended June 30, 2015 because the designated hedged item was classified as interest expense in the cash flows from operating activities in the consolidated statements of cash flows.
In addition, in November 2014, the Company entered into a non-designated forward contract to lock the treasury rate used to determine the redemption amount of the 2018 Senior Notes. The objective of the forward contract was to hedge the risk associated with the variability of the redemption amount due to changes in interest rates through the redemption of the existing 2018 Senior Notes. The forward contract had a notional amount of $750.0 million. The forward contract was terminated in December 2014 and the resulting fair value of $1.2 million was included in the loss on extinguishment of debt and other, net line in the consolidated statements of operations, partially offsetting the loss on redemption of the debt during the three months ended December 31, 2014. The cash proceeds from the forward contract were included in the cash flows from financing activities in the consolidated statements of cash flows for the fiscal year ended June 30, 2015, partially offsetting the cash outflows for the redemption of the 2018 Senior Notes.

103

Table of Contents

Derivatives in Cash Flow Hedging Relationships: Foreign Exchange and Interest Rate Contracts
The locations and amounts of designated and non-designated derivative instruments’ gains and losses reported in the consolidated financial statements for the indicated periods were as follows:
(In thousands)
Location in Financial Statements
Year ended June 30,
2016
 
2015
Derivatives Designated as Hedging Instruments
 
 
 
 
Gains in accumulated OCI on derivatives (effective portion)
Accumulated OCI
$
(9,622
)
 
$
13,745

Gains reclassified from accumulated OCI into income (effective portion):
Revenues
$
(2,926
)
 
$
7,615

 
Costs of revenues
(1,551
)
 
(1,503
)
 
Interest expense
755

 
503

 
Net gains reclassified from accumulated OCI into income (effective portion)
$
(3,722
)
 
$
6,615

Gains recognized in income on derivatives (ineffective portion and amount excluded from effectiveness testing)
Other expense (income), net
$
(989
)
 
$
243

Derivatives Not Designated as Hedging Instruments
 
 
 
 
Gains recognized in income
Other expense (income), net
$
(21,430
)
 
$
13,976

 
Loss on extinguishment of debt and other, net
$

 
$
1,180

The U.S. dollar equivalent of all outstanding notional amounts of hedge contracts, with maximum remaining maturities of approximately seven months and 16 months as of June 30, 2016 and 2015, respectively, were as follows:
(In thousands)
As of
June 30, 2016
 
As of
June 30, 2015
Cash flow hedge contracts
 
 
 
Purchase
$
7,591

 
$
32,775

Sell
$
91,793

 
$
88,800

Other foreign currency hedge contracts
 
 
 
Purchase
$
122,275

 
$
64,012

Sell
$
115,087

 
$
123,091

 

104

Table of Contents

The locations and fair value amounts of the Company’s derivative instruments reported in its Consolidated Balance Sheets as of the dates indicated below were as follows:
 
Asset Derivatives
 
Liability Derivatives
 
Balance Sheet Location
 
As of
June 30, 2016
 
As of
June 30, 2015
 
Balance Sheet Location
 
As of
June 30, 2016
 
As of
June 30, 2015
(In thousands)
Fair Value
 
 
Fair Value
Derivatives designated as hedging instruments
 
 
 
 
 
 
 
 
 
 
 
Foreign exchange contracts
Other current assets
 
$
342

 
$
1,722

 
Other current liabilities
 
$
4,736

 
$
1,920

Total derivatives designated as hedging instruments
 
 
342

 
1,722

 
 
 
4,736

 
1,920

Derivatives not designated as hedging instruments
 
 
 
 
 
 
 
 
 
 
 
Foreign exchange contracts
Other current assets
 
753

 
1,342

 
Other current liabilities
 
6,911

 
1,186

Total derivatives not designated as hedging instruments
 
 
753

 
1,342

 
 
 
6,911

 
1,186

Total derivatives
 
 
$
1,095

 
$
3,064

 
 
 
$
11,647

 
$
3,106

The following table provides the balances and changes in accumulated OCI, before taxes, related to derivative instruments for the indicated periods:
 
 
Year ended June 30,
(In thousands)
 
2016
 
2015
Beginning balance
 
$
7,110

 
$
(20
)
Amount reclassified to income
 
3,722

 
(6,615
)
Net change in unrealized gains or losses
 
(9,622
)
 
13,745

Ending balance
 
$
1,210

 
$
7,110

Offsetting of Derivative Assets and Liabilities
KLA-Tencor presents derivatives at gross fair values in the Consolidated Balance Sheets. The Company has entered into arrangements with each of its counterparties, which reduce credit risk by permitting net settlement of transactions with the same counterparty under certain conditions. As of June 30, 2016 and 2015, information related to the offsetting arrangements was as follows (in thousands):
As of June 30, 2016
 
 
 
 
 
Gross Amounts of Derivatives Not Offset in the Consolidated Balance Sheets
 
 
Description
 
Gross Amounts of Derivatives
 
Gross Amounts of Derivatives Offset in the Consolidated Balance Sheets
 
Net Amount of Derivatives Presented in the Consolidated Balance Sheets
 
Financial Instruments
 
Cash Collateral Received
 
Net Amount
Derivatives - Assets
 
$
1,095

 
$

 
$
1,095

 
$
(843
)
 
$

 
$
252

Derivatives - Liabilities
 
$
(11,647
)
 
$

 
$
(11,647
)
 
$
843

 
$

 
$
(10,804
)
As of June 30, 2015
 
 
 
 
 
Gross Amounts of Derivatives Not Offset in the Consolidated Balance Sheets
 
 
Description
 
Gross Amounts of Derivatives
 
Gross Amounts of Derivatives Offset in the Consolidated Balance Sheets
 
Net Amount of Derivatives Presented in the Consolidated Balance Sheets
 
Financial Instruments
 
Cash Collateral Received
 
Net Amount
Derivatives - Assets
 
$
3,064

 
$

 
$
3,064

 
$
(2,809
)
 
$

 
$
255

Derivatives - Liabilities
 
$
(3,106
)
 
$

 
$
(3,106
)
 
$
2,809

 
$

 
$
(297
)

105

Table of Contents

NOTE 16 — SEGMENT REPORTING AND GEOGRAPHIC INFORMATION
KLA-Tencor reports one reportable segment in accordance with the provisions of the authoritative guidance for segment reporting. Operating segments are defined as components of an enterprise about which separate financial information is evaluated regularly by the chief operating decision maker in deciding how to allocate resources and in assessing performance. KLA-Tencor’s chief operating decision maker is its Chief Executive Officer. The Company is engaged primarily in designing, manufacturing and marketing process control and yield management solutions for the semiconductor and related nanoelectronics industries.
The Company has made certain organizational changes and consolidated its product divisions effective in the first quarter of fiscal year ended 2016. As a result, the Company has four operating segments which primarily reflect how it is organized by product offerings: Wafer Inspection, Patterning, Global Service and Support, and Others. Accordingly, the Company has recast its financial information and disclosures for prior periods to be consistent with the current operating structure.
All operating segments have been aggregated due to their inter-dependencies, commonality of long-term economic characteristics, products and services, the production processes, class of customer and distribution processes. The Company’s service products are an extension of the system product portfolio and provide customers with spare parts and fab management services (including system preventive maintenance and optimization services) to improve yield, increase production uptime and throughput, and lower the cost of ownership. Since the Company operates in one reportable segment, all financial segment information required by the authoritative guidance can be found in the consolidated financial statements.
The Company’s significant operations outside the United States include manufacturing facilities in Singapore, Israel, Germany and China and sales, marketing and service offices in Western Europe, Japan and the Asia Pacific regions. For geographical revenue reporting, revenues are attributed to the geographic location in which the customer is located. Long-lived assets consist of land, property and equipment, net and are attributed to the geographic region in which they are located.
The following is a summary of revenues by geographic region, based on ship-to location, for the indicated periods (as a percentage of total revenues):
(Dollar amounts in thousands)
Year ended June 30,
2016
 
2015
 
2014
Revenues:
 
 
 
 
 
 
 
 
 
 
 
Taiwan
$
894,557

 
30
%
 
$
691,482

 
25
%
 
$
741,470

 
25
%
North America
521,335

 
18
%
 
815,914

 
29
%
 
705,159

 
24
%
Japan
444,216

 
15
%
 
426,963

 
15
%
 
334,653

 
11
%
China
430,074

 
14
%
 
162,669

 
6
%
 
260,089

 
9
%
Korea
367,905

 
12
%
 
405,320

 
14
%
 
371,139

 
13
%
Europe & Israel
167,936

 
6
%
 
194,670

 
7
%
 
306,779

 
11
%
Rest of Asia
158,470

 
5
%
 
117,031

 
4
%
 
210,119

 
7
%
Total
$
2,984,493

 
100
%
 
$
2,814,049

 
100
%
 
$
2,929,408

 
100
%
The following is a summary of revenues by major products for the indicated periods (as a percentage of total revenues):
(Dollar amounts in thousands)
Year ended June 30,
2016
 
2015
 
2014
Revenues:
 
 
 
 
 
 
 
 
 
 
 
Wafer Inspection
$
1,293,922

 
43
%
 
$
1,224,858

 
44
%
 
$
1,466,275

 
50
%
Patterning
772,045

 
26
%
 
736,959

 
26
%
 
705,473

 
24
%
Global Service and Support (1)
824,297

 
28
%
 
752,881

 
27
%
 
685,658

 
23
%
Other
94,229

 
3
%
 
99,351

 
3
%
 
72,002

 
3
%
Total
$
2,984,493

 
100
%
 
$
2,814,049

 
100
%
 
$
2,929,408

 
100
%
__________________ 
(1) The Global Service and Support revenues includes service revenues as presented in the consolidated statements of operations as well as certain product revenues, primarily revenues from the Company’s K-T Certified business.

106

Table of Contents

In the fiscal year ended June 30, 2016, two customers accounted for approximately 18% and 10% of total revenues. In the fiscal year ended June 30, 2015, three customers accounted for approximately 15%, 12% and 11% of total revenues. In the fiscal year ended June 30, 2014, three customers accounted for approximately 18%, 14% and 11% of total revenues.
Long-lived assets by geographic region as of the dates indicated below were as follows:
 
As of June 30,
(In thousands)
2016
 
2015
Long-lived assets:
 
 
 
United States
$
182,597

 
$
207,779

Singapore
41,658

 
45,444

Israel
30,844

 
33,841

Europe
13,347

 
16,536

Rest of Asia
9,568

 
10,991

Total
$
278,014

 
$
314,591

NOTE 17 — RELATED PARTY TRANSACTIONS
During the fiscal years ended June 30, 2016, 2015 and 2014, the Company purchased from, or sold to, several entities, where one or more executive officers of the Company or members of the Company’s Board of Directors, or their immediate family members, also serves as an executive officer or a board member, including Broadcom Limited (formerly known as Avago Technologies Ltd.), Cisco Systems, Inc., Citrix Systems, Inc., Freescale Semiconductor, Inc., Keysight Technologies, Inc., NetApp, Inc. and SAP AG. The following table provides the transactions with these parties for the indicated periods (for the portion of such period that they were considered related):
 
Year ended June 30,
(In thousands)
2016
 
2015
 
2014
Total revenues
$
8

 
$
1,856

 
$
2,701

Total purchases
$
983

 
$
1,098

 
$
2,622

 The Company’s receivable balances from these parties were immaterial at June 30, 2016 and 2015. Management believes that such transactions are at arm’s length and on similar terms as would have been obtained from unaffiliated third parties.
NOTE 18 — QUARTERLY CONSOLIDATED RESULTS OF OPERATIONS (UNAUDITED)
The following is a summary of the Company’s quarterly consolidated results of operations (unaudited) for the fiscal years ended June 30, 2016 and 2015.
(In thousands, except per share data)
First quarter
ended
September 30, 2015
 
Second quarter
ended
December 31, 2015
 
Third quarter
ended
March 31, 2016
 
Fourth quarter
ended
June 30, 2016
Total revenues
$
642,644

 
$
710,245

 
$
712,433

 
$
919,171

Gross margin
$
372,400

 
$
429,265

 
$
437,834

 
$
581,603

Net income
$
104,897

 
$
152,207

 
$
175,777

 
$
271,541

Net income per share:
 
 
 
 
 
 
 
Basic(1)
$
0.67

 
$
0.98

 
$
1.13

 
$
1.74

Diluted(1)
$
0.66

 
$
0.98

 
$
1.12

 
$
1.73


107

Table of Contents

(In thousands, except per share data)
First quarter
ended
September 30, 2014
 
Second quarter
ended
December 31, 2014
 
Third quarter
ended
March 31, 2015
 
Fourth quarter
ended
June 30, 2015
Total revenues
$
642,901

 
$
676,357

 
$
738,459

 
$
756,332

Gross margin
$
354,434

 
$
393,144

 
$
418,177

 
$
433,065

Net income
$
72,233

 
$
20,268

 
$
131,638

 
$
142,019

Net income per share:
 
 
 
 
 
 
 
Basic(1)
$
0.44

 
$
0.12

 
$
0.81

 
$
0.90

Diluted(1)
$
0.43

 
$
0.12

 
$
0.81

 
$
0.89

 __________________ 
(1)
Basic and diluted net income per share are computed independently for each of the quarters presented based on the weighted-average basic and fully diluted shares outstanding for each quarter. Therefore, the sum of quarterly basic and diluted net income per share information may not equal annual basic and diluted net income per share.
The Company’s net income decreased to $20.3 million in the three months ended December 31, 2014, primarily as a result of a pre-tax net loss of $131.7 million pertaining to the net loss on extinguishment of debt and certain one-time expenses of $2.5 million associated with the leverage recapitalization.

108

Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
To the Board of Directors and Stockholders of KLA-Tencor Corporation:
In our opinion, the consolidated financial statements listed in the index appearing under Item 15(a)(1) present fairly, in all material respects, the financial position of KLA-Tencor Corporation and its subsidiaries at June 30, 2016 and June 30, 2015, and the results of their operations and their cash flows for each of the three years in the period ended June 30, 2016 in conformity with accounting principles generally accepted in the United States of America. In addition, in our opinion, the financial statement schedule listed in the index appearing under Item 15(a)(2) presents fairly, in all material respects, the information set forth therein when read in conjunction with the related consolidated financial statements. Also in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of June 30, 2016 based on criteria established in Internal Control—Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). The Company’s management is responsible for these financial statements and financial statement schedule, for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in Management’s Report on Internal Control over Financial Reporting under Item 9A. Our responsibility is to express opinions on these financial statements, on the financial statement schedule, and on the Company’s internal control over financial reporting based on our integrated audits. We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement and whether effective internal control over financial reporting was maintained in all material respects. Our audits of the financial statements included examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.
As discussed in Note 1 to the consolidated financial statements, the Company changed the manner in which it classifies deferred taxes on the consolidated balance sheet in 2016.
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
/s/ PricewaterhouseCoopers LLP

San Jose, California
August 5, 2016

109

Table of Contents

ITEM 9.
CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE
None.
 
ITEM 9A.
CONTROLS AND PROCEDURES
Evaluation of Disclosure Controls and Procedures
The Company conducted an evaluation of the effectiveness of the design and operation of its disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (the “Exchange Act”)) (“Disclosure Controls”) as of the end of the period covered by this Annual Report on Form 10-K (this “Report”) required by Exchange Act Rules 13a-15(b) or 15d-15(b). The controls evaluation was conducted under the supervision and with the participation of the Company’s management, including the Company’s Chief Executive Officer (“CEO”) and Chief Financial Officer (“CFO”). Based on this evaluation, the CEO and CFO have concluded that as of the end of the period covered by this Report the Company’s Disclosure Controls were effective at a reasonable assurance level.
Attached as exhibits to this Report are certifications of the CEO and CFO, which are required in accordance with Rule 13a-14 of the Exchange Act. This Controls and Procedures section includes the information concerning the controls evaluation referred to in the certifications, and it should be read in conjunction with the certifications for a more complete understanding of the topics presented.
Definition of Disclosure Controls
Disclosure Controls are controls and procedures designed to reasonably assure that information required to be disclosed in the Company’s reports filed under the Exchange Act, such as this Report, is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms. Disclosure Controls are also designed to reasonably assure that such information is accumulated and communicated to the Company’s management, including the CEO and CFO, as appropriate to allow timely decisions regarding required disclosure. The Company’s Disclosure Controls include components of its internal control over financial reporting, which consists of control processes designed to provide reasonable assurance regarding the reliability of its financial reporting and the preparation of financial statements in accordance with generally accepted accounting principles in the United States. To the extent that components of the Company’s internal control over financial reporting are included within its Disclosure Controls, they are included in the scope of the Company’s annual controls evaluation.
Management’s Report on Internal Control over Financial Reporting
The Company’s management is responsible for establishing and maintaining adequate internal control over financial reporting as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act. Under the supervision and with the participation of the Company’s management, including the CEO and CFO, the Company conducted an evaluation of the effectiveness of its internal control over financial reporting based on criteria established in the framework in Internal Control—Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission. Based on this evaluation, the Company’s management concluded that the Company’s internal control over financial reporting was effective as of June 30, 2016.
The effectiveness of the Company’s internal control over financial reporting as of June 30, 2016 has been audited by PricewaterhouseCoopers LLP, an independent registered public accounting firm, as stated in their report which appears in Item 8, “Financial Statements and Supplementary Data” in this Annual Report on Form 10-K.

110

Table of Contents

Limitations on the Effectiveness of Controls
The Company’s management, including the CEO and CFO, does not expect that the Company’s Disclosure Controls or internal control over financial reporting will prevent all errors and all fraud. A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the control system’s objectives will be met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within the Company have been detected. These inherent limitations include the realities that judgments in decision making can be faulty and that breakdowns can occur because of simple error or mistake. Controls can also be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the controls. The design of any system of controls is based in part on certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions. Over time, controls may become inadequate because of changes in conditions or deterioration in the degree of compliance with policies or procedures. Because of the inherent limitations in a cost-effective control system, misstatements due to error or fraud may occur and not be detected.
Changes in Internal Control over Financial Reporting
There were no changes in the Company’s internal control over financial reporting that occurred during the fourth quarter of fiscal year 2016 that have materially affected, or are reasonably likely to materially affect, the Company’s internal control over financial reporting.

ITEM 9B.
OTHER INFORMATION
None.
 

111

Table of Contents

PART III

ITEM 10.
DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE
For the information required by this Item, see “Information About the Directors and the Nominees,” “Information About Executive Officers,” “Security Ownership of Certain Beneficial Owners and Management—Section 16(a) Beneficial Ownership Reporting Compliance,” “Our Corporate Governance Practices—Standards of Business Conduct; Whistleblower Hotline and Website” and “Information About the Board of Directors and Its Committees—Audit Committee” in the Proxy Statement, which is incorporated herein by reference.

ITEM 11.
EXECUTIVE COMPENSATION
For the information required by this Item, see “Executive Compensation and Other Matters,” “Director Compensation” and “Information About the Board of Directors and Its Committees—Compensation Committee—Risk Considerations in Our Compensation Programs” in the Proxy Statement, which is incorporated herein by reference.

ITEM 12.
SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS
For the information required by this Item, see “Security Ownership of Certain Beneficial Owners and Management” and “Equity Compensation Plan Information” in the Proxy Statement, which is incorporated herein by reference.
 
ITEM 13.
CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE
For the information required by this Item, see “Certain Relationships and Related Transactions” and “Information About the Board of Directors and Its Committees —The Board of Directors” in the Proxy Statement, which is incorporated herein by reference.
 
ITEM 14.
PRINCIPAL ACCOUNTING FEES AND SERVICES
For the information required by this Item, see “Proposal Two: Ratification of Appointment of PricewaterhouseCoopers LLP as Our Independent Registered Public Accounting Firm for the Fiscal Year Ending June 30, 2017” in the Proxy Statement, which is incorporated herein by reference.
 

112

Table of Contents

PART IV

ITEM 15.
EXHIBITS, FINANCIAL STATEMENT SCHEDULES
(a) The following documents are filed as part of this Annual Report on Form 10-K:
1. Financial Statements:
The following financial statements and schedules of the Registrant are contained in Item 8, “Financial Statements and Supplementary Data” of this Annual Report on Form 10-K:
2. Financial Statement Schedule:
The following financial statement schedule of the Registrant is filed as part of this Annual Report on Form 10-K and should be read in conjunction with the financial statements:
All other schedules are omitted because they are either not applicable or the required information is shown in the Consolidated Financial Statements or notes thereto.
3. Exhibits
The information required by this Item is set forth in the Exhibit Index following Schedule II included in this Annual Report.


113

Table of Contents

SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
 
 
 
 
KLA-Tencor Corporation
 
 
 
 
 
August 5, 2016
 
By:
 
/S/    RICHARD P. WALLACE        
(Date)
 
 
 
Richard P. Wallace
 
 
 
 
President and Chief Executive Officer

114

Table of Contents

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.
 
Signature
  
Title
 
Date
 
 
 
 
 
/s/    RICHARD P. WALLACE    
  
President, Chief Executive Officer and Director (principal executive officer)
 
August 5, 2016
Richard P. Wallace
  
 
 
 
 
 
 
/s/     BREN D. HIGGINS 
  
Executive Vice President and Chief Financial Officer (principal financial officer)
 
August 5, 2016
Bren D. Higgins
  
 
 
 
 
 
 
/s/    VIRENDRA A. KIRLOSKAR
  
Senior Vice President and Chief Accounting Officer (principal accounting officer)
 
August 5, 2016
Virendra A. Kirloskar
 
 
 
 
 
 
 
/s/    EDWARD W. BARNHOLT
  
Chairman of the Board and Director
 
August 5, 2016
Edward W. Barnholt
 
 
 
 
 
 
 
/s/    ROBERT M. CALDERONI
  
Director
 
August 5, 2016
Robert M. Calderoni
 
 
 
 
 
 
 
/s/    JOHN T. DICKSON  
  
Director
 
August 5, 2016
John T. Dickson
 
 
 
 
 
 
 
/s/    EMIKO HIGASHI 
 
Director
 
August 5, 2016
Emiko Higashi
 
 
 
 
 
 
 
/s/    KEVIN J. KENNEDY 
  
Director
 
August 5, 2016
Kevin J. Kennedy
 
 
 
 
 
 
 
/s/    GARY B. MOORE
 
Director
 
August 5, 2016
Gary B. Moore
 
 
 
 
 
 
 
/s/    KIRAN M. PATEL       
  
Director
 
August 5, 2016
Kiran M. Patel
 
 
 
 
 
 
 
/s/    ROBERT A. RANGO      
 
Director
 
August 5, 2016
Robert A. Rango
 
 
 
 
 
 
 
/s/    DAVID C. WANG    
  
Director
 
August 5, 2016
David C. Wang
 
 
 
 
 
 
 

115

Table of Contents

SCHEDULE II
Valuation and Qualifying Accounts
 
(In thousands)
Balance at
Beginning
of Period
 
Charged to
Expense
 
Deductions/
Adjustments
 
Balance
at End
of Period
Fiscal Year Ended June 30, 2014:
 
 
 
 
 
 
 
Allowance for Doubtful Accounts
$
22,135

 
$

 
$
(308
)
 
$
21,827

Allowance for Deferred Tax Assets
$
57,097

 
$

 
$
19,231

 
$
76,328

Fiscal Year Ended June 30, 2015:
 
 
 
 
 
 
 
Allowance for Doubtful Accounts
$
21,827

 
$

 
$
(164
)
 
$
21,663

Allowance for Deferred Tax Assets
$
76,328

 
$

 
$
15,022

 
$
91,350

Fiscal Year Ended June 30, 2016:


 
 
 
 
 
 
Allowance for Doubtful Accounts
$
21,663

 
$

 
$
9

 
$
21,672

Allowance for Deferred Tax Assets
$
91,350

 
$
1,763

 
$
11,855

 
$
104,968


116

Table of Contents

KLA-TENCOR CORPORATION
EXHIBIT INDEX
 
Exhibit
Number
 
Exhibit Description
 
Incorporated by Reference
Form
 
File No.
 
Exhibit
Number
 
Filing Date
2.1
 
Agreement and Plan of Merger and Reorganization, dated as of October 20, 2015, by and among Lam Research Corporation, Topeka Merger Sub 1, Inc., Topeka Merger sub 2, Inc. and KLA-Tencor Corporation
 
8-K
 
No. 000-09992
 
2.1
 
October 21, 2015
3.1
 
Amended and Restated Certificate of Incorporation
 
10-Q
 
No. 000-09992
 
3.1
 
May 14, 1997
3.2
 
Certificate of Amendment of Amended and Restated Certificate of Incorporation
 
10-Q
 
No. 000-09992
 
3.1
 
February 14, 2001
3.3
 
Certificate of Amendment to Amended and Restated Certificate of Incorporation of the Company effective as of November 8, 2012
 
8-K
 
No. 000-09992
 
3.1
 
November 13, 2012
3.4
 
Amended and Restated Bylaws of the Company effective as of May 7, 2015
 
8-K
 
No. 000-09992
 
3.1
 
May 8, 2015
4.1
 
Indenture dated November 6, 2014 between KLA-Tencor Corporation and Wells Fargo Bank, National Association, as trustee
 
8-K
 
No. 000-09992
 
4.1
 
November 7, 2014
4.2
 
Form of Officer’s Certificate setting forth the terms of the Notes (with form of Notes attached)
 
8-K
 
No. 000-09992
 
4.2
 
November 7, 2014
10.1
 
2004 Equity Incentive Plan (as amended and restated (as of August 7, 2014))*
 
8-K
 
No. 000-09992
 
10.45
 
August 12, 2014
10.2
 
Rules of the Company’s 2004 Equity Incentive Plan for the Grant of Restricted Stock Units to Participants in France*
 
10-Q
 
No. 000-09992
 
10.50
 
January 30, 2009
10.3
 
Notice of Grant of Restricted Stock Units*
 
10-Q
 
No. 000-09992
 
10.18
 
May 4, 2006
10.4
 
Option Grant Notification Form*
 
8-K
 
No. 000-09992
 
10.1
 
September 29, 2005
10.5
 
Form of Restricted Stock Unit Award Notification (Performance-Vesting)*
 
8-K
 
No. 000-09992
 
10.19
 
September 20, 2006
10.6
 
Form of Restricted Stock Unit Award Notification (Performance-Vesting) (approved August 2012)*
 
8-K
 
No. 000-09992
 
10.2
 
August 2, 2012
10.7
 
Form of Restricted Stock Unit Award Notification (Performance-Vesting) (approved August 2014)*
 
8-K
 
No. 000-09992
 
10.49
 
August 12, 2014
10.8
 
Form of Restricted Stock Unit Award Notification (Service-Vesting)*
 
10-K
 
No. 000-09992
 
10.17
 
August 7, 2008
10.9
 
Form of Restricted Stock Unit Award Notification (Service-Vesting) (approved August 2012)*
 
8-K
 
No. 000-09992
 
10.1
 
August 2, 2012
10.10
 
Form of Restricted Stock Unit Award Notification (Service-Vesting; 25% Annual Vesting) (approved August 2014)*
 
8-K
 
No. 000-09992
 
10.50
 
August 12, 2014
10.11
 
Form of Restricted Stock Unit Award Notification (Service-Vesting; 50% Vesting Year Two, 50% Vesting Year Four) (approved August 2014)*
 
8-K
 
No. 000-09992
 
10.51
 
August 12, 2014
10.12
 
Form of Restricted Stock Unit Award Notification (France) (approved August 2014)*
 
8-K
 
No. 000-09992
 
10.52
 
August 12, 2014
10.13
 
Form of Restricted Stock Unit Agreement*
 
8-K
 
No. 000-09992
 
10.20
 
September 20, 2006

117

Table of Contents

Exhibit
Number
 
Exhibit Description
 
Incorporated by Reference
Form
 
File No.
 
Exhibit
Number
 
Filing Date
10.14
 
Form of Restricted Stock Unit Agreement for U.S. Employees (approved December 2008)*
 
10-Q
 
No. 000-09992
 
10.44
 
January 30, 2009
10.15
 
Form of Restricted Stock Unit Agreement for U.S. Employees (with Dividend Equivalents) (approved August 2014)*
 
8-K
 
No. 000-09992
 
10.46
 
August 12, 2014
10.16
 
Form of Restricted Stock Unit Agreement for French Participants (approved December 2008)*
 
10-Q
 
No. 000-09992
 
10.45
 
January 30, 2009
10.17
 
Form of Restricted Stock Unit Agreement for French Participants (with Dividend Equivalents) (approved August 2014)*
 
8-K
 
No. 000-09992
 
10.47
 
August 12, 2014
10.18
 
Form of Restricted Stock Unit Agreement for Non-U.S. Employees (approved December 2008)*
 
10-Q
 
No. 000-09992
 
10.46
 
January 30, 2009
10.19
 
Form of Restricted Stock Unit Agreement for Non-U.S. Employees (with Dividend Equivalents) (approved August 2014)*
 
8-K
 
No. 000-09992
 
10.48
 
August 12, 2014
10.20
 
Amended and Restated 1997 Employee Stock Purchase Plan (as amended May 8, 2014)*
 
10-K
 
No. 000-09992
 
10.21
 
August 8, 2014
10.21
 
KLA-Tencor Corporation Performance Bonus Plan*
 
DEF 14A
 
No. 000-09992
 
App. B
 
September 26, 2013
10.23
 
Fiscal Year 2014 Executive Incentive Plan*+
 
10-Q
 
No. 000-09992
 
10.44
 
October 25, 2013
10.24
 
Fiscal Year 2015 Executive Incentive Plan*+
 
10-Q
 
No. 000-09992
 
10.53
 
October 24, 2014
10.25
 
Fiscal Year 2016 Executive Incentive Plan*+
 
10-Q
 
No. 000-09992
 
10.44
 
October 22, 2015
10.26
 
Executive Deferred Savings Plan (as amended and restated effective November 7, 2012)*
 
10-Q
 
No. 000-09992
 
10.42
 
January 25, 2013
10.27
 
Executive Severance Plan (as amended and restated September 21, 2015)*
 
10-Q
 
No. 000-09992
 
10.44
 
October 22, 2015
10.28
 
2010 Executive Severance Plan (as amended and restated September 21, 2015)*
 
10-Q
 
No. 000-09992
 
10.45
 
October 22, 2015
10.29
 
Credit Agreement dated November 14, 2014 among KLA-Tencor Corporation, the lenders party thereto and JPMorgan Chase Bank, N.A., as administrative agent
 
8-K
 
No. 000-09992
 
10.54
 
November 17, 2014
12.1
 
Computation of Ratio of Earnings to Fixed Charges
 
 
 
 
 
 
 
 
21.1
 
List of Subsidiaries
 
 
 
 
 
 
 
 
23.1
 
Consent of Independent Registered Public Accounting Firm
 
 
 
 
 
 
 
 
31.1
 
Certification of Chief Executive Officer under Rule 13a-14(a) of the Securities Exchange Act of 1934
 
 
 
 
 
 
 
 
31.2
 
Certification of Chief Financial Officer under Rule 13a-14(a) of the Securities Exchange Act of 1934
 
 
 
 
 
 
 
 
32
 
Certification of Chief Executive Officer and Chief Financial Officer Pursuant to 18 U.S.C. Section 1350
 
 
 
 
 
 
 
 
99.1
 
Risks related to the Merger with Lam Research
 
 
 
 
 
 
 
 
101.INS
 
XBRL Instance Document
 
 
 
 
 
 
 
 
101.SCH
 
XBRL Taxonomy Extension Schema Document
 
 
 
 
 
 
 
 

118

Table of Contents

Exhibit
Number
 
Exhibit Description
 
Incorporated by Reference
Form
 
File No.
 
Exhibit
Number
 
Filing Date
101.CAL
 
XBRL Taxonomy Extension Calculation Linkbase Document
 
 
 
 
 
 
 
 
101.DEF
 
XBRL Taxonomy Extension Definition Linkbase Document
 
 
 
 
 
 
 
 
101.LAB
 
XBRL Taxonomy Extension Label Linkbase Document
 
 
 
 
 
 
 
 
101.PRE
 
XBRL Taxonomy Extension Presentation Linkbase Document
 
 
 
 
 
 
 
 
__________________
*
Denotes a management contract, plan or arrangement.
+
Confidential treatment has been requested as to a portion of this exhibit.

119